Machinery Regulation: what changes from the Machinery Directive in January 2027

Marc HaddadForward Deployed Regulatory Engineer
The EU Machinery Regulation, Regulation (EU) 2023/1230, replaces the Machinery Directive 2006/42/EC on January 20, 2027. From that day, every machine, related product and partly completed machine placed on the EU market must conform to the Regulation. There is no overlap period, and units already placed under the Directive do not need to be redone.
Key points
- Start date: the Regulation applies from January 20, 2027, and the Directive is repealed the same day, with no transition period and no early opt-in.
- What carries over: risk assessment, essential requirements, CE marking and self-certification for most products.
- Changes that bite: software and AI safety functions, cybersecurity, a stricter route for six high-risk categories, and a harmonised standards list that has not yet been published under the new text.
- Unit by unit: obligations attach to each unit when it is placed on the market, not to the design.
What is the Machinery Regulation 2023/1230?
It is the EU law that replaces the Machinery Directive as the safety rulebook for machinery, adopted on June 14, 2023, and published on June 29, 2023. On July 4, 2023, a corrigendum (an official correction) moved every date in it by six days, so work from the corrected text: the Regulation applies from January 20, 2027, not January 14.[1]
Because it is a regulation, it applies directly in every Member State. That means one text instead of 27 national transpositions, the national laws that copy a directive into each country’s legal system.
For most machines the hardware does not change, and the work sits in the conformity route, the technical file and the paperwork.
What changes from the Machinery Directive?
The core logic stays: assess risk, meet the essential requirements, apply CE marking (the manufacturer’s mark declaring the product meets EU rules) and self-certify most products. What changes is how software, AI and cybersecurity are treated, which products need an outside check, and who in the supply chain carries obligations.
Two terms come up throughout. A notified body is an independent assessment body designated by an EU country to check conformity. Harmonised standards are European standards cited by the Commission, and applying them gives a presumption of conformity, meaning the product is treated as meeting the requirements they cover; common specifications can play the same role.
The table compares the two texts element by element.
| Element | Directive 2006/42/EC | Regulation (EU) 2023/1230 |
|---|---|---|
| Legal form | Directive, transposed nationally | Regulation, directly applicable |
| High-risk list | Annex IV, 23 categories. Self-certification allowed where harmonised standards cover all requirements (Article 12(3)) | Annex I Part A, 6 categories: notified body always, with or without standards (Article 25(2)). Part B, 19 categories: self-certification only if the harmonised standards or common specifications for that category are applied in full (Article 25(3)) |
| Moved to notified body only | Removable mechanical transmission devices and their guards, vehicle servicing lifts, portable cartridge-operated fixing tools (Annex IV points 14 to 16 and 18) | Same four, plus safety components and embedded systems with self-evolving (machine learning) behaviour that ensure safety functions (Part A points 5 and 6) |
| Software | Not addressed as such | A safety component can be “physical or digital”, including software (Article 3(3)). Control systems must keep a log of safety software uploaded after sale for five years, and self-evolving behaviour must stay within its defined task and movement space (Annex III, 1.2.1) |
| Cybersecurity | Not addressed | Protection against corruption (Annex III, 1.1.9). Control systems must withstand reasonably foreseeable malicious attempts (1.2.1). Presumption of conformity for both through Cybersecurity Act certification (Article 20(9)) |
| Instructions | No digital-only option | Digital allowed: marked on the product, downloadable, online for the expected lifetime and at least 10 years. Paper free of charge within one month if requested at purchase. Essential safety information on paper where non-professionals may use it (Article 10(7)) |
| Modification after sale | Not defined | A “substantial modification”, physical or digital, makes the modifier the manufacturer (Articles 3(16) and 18) |
| Economic operators | Manufacturer and authorised representative | Adds importers and distributors (Articles 13 to 17) |
| Technical documentation | Kept at least 10 years from manufacture, or from the last unit in series production (Annex VII) | Kept at least 10 years after placing on the market (Articles 10(3) and 11(3)). Includes the source code or programming logic of safety-related software, on a reasoned request (Annex IV, Part A(m)) |
| Declaration | EC declaration of conformity | One EU declaration covering every applicable Union act (Article 21(3)) |
Since July 27, 2026, Regulation (EU) 2026/1744 has also amended the text. Under the amended text, the Commission must add requirements for high-risk AI systems, whether a safety component or the product itself, by delegated acts (rules the Commission adopts under powers the Regulation gives it) amending Annex III, applying by August 2, 2028.[1] Until standards or common specifications exist under the Regulation, high-risk AI systems that comply with the harmonised standards or common specifications under the AI Act (Regulation (EU) 2024/1689) are presumed to conform.[1]
When does the Machinery Regulation apply?
From January 20, 2027, so new units ship under the Directive until January 19, 2027, and under the Regulation from January 20.
The obligation attaches to each unit when it is placed on the market, meaning made available on the EU market for the first time. A unit placed under the Directive before January 20, 2027, can still be sold on and used, but the next unit off the same line, placed on January 20, needs a Regulation file and declaration.[1]
EC type-examination certificates and approval decisions issued under the Directive remain valid until they expire.[1]
The table lists the milestones, from publication to the AI requirements in 2028.
| Date | Milestone | Status |
|---|---|---|
| June 29, 2023 | Regulation published, Official Journal (OJ) L 165 | Adopted |
| July 4, 2023 | Corrigendum corrects all dates, OJ L 169 | Adopted |
| July 19, 2023 | Entry into force | Adopted |
| January 20, 2024 | Rules on notified bodies apply (Articles 26 to 42) | Adopted |
| July 27, 2026 | AI alignment amendment, Regulation (EU) 2026/1744, in force | Adopted |
| September 7, 2026 | Implementing Decision (EU) 2026/2015 published, repealing the Directive’s standards list from January 20, 2027 | Adopted |
| October 20, 2026 | National penalty rules apply and are notified (Articles 50 and 54) | Adopted |
| November 23, 2026 | Parliament plenary on the Omnibus IV digitalisation regulation (indicative) | Proposed |
| By end of 2026 | First harmonised standards list under the Regulation | Expected (Commission) |
| January 20, 2027 | Regulation applies; Directive repealed | Adopted |
| December 11, 2027 | Cyber Resilience Act main obligations apply | Adopted (related) |
| August 2, 2028 | AI requirements for machinery apply, by delegated act | Adopted deadline, acts not yet adopted |
Who does the Machinery Regulation apply to?
It covers machinery and its related products, and every business that puts them on the EU market, though some product groups are excluded or split.
- Products: machinery, partly completed machinery (an assembly built to be incorporated into another machine), and the related products in Article 2(1): interchangeable equipment, safety components, lifting accessories, chains, ropes and webbing, and removable mechanical transmission devices.
- Businesses: manufacturers, authorised representatives, importers and distributors.[1] An importer or distributor takes on the manufacturer’s obligations in the cases set out in Article 17, and so does anyone who substantially modifies a machine.[1] The only exception is a non-professional modifying a machine for their own use.
- Electrical products: household appliances for domestic use, audio and video equipment, IT equipment, ordinary office machinery, low-voltage switchgear and electric motors stay out insofar as they fall under the Low Voltage Directive or Radio Equipment Directive.[1] Electrically operated furniture and 3D printers are carved back in, and an industrial machine with electrics is machinery.
- Vehicles: motor vehicles, two- and three-wheelers, tractors and competition vehicles are excluded, but machinery mounted on motor vehicles, two- and three-wheelers and tractors is in scope.[1] The same applies to air, water and rail transport,[1] while the competition vehicle exclusion has no such exception.[1]
- Children’s products: Article 2(2) has no toy exclusion. Where more specific EU legislation covers a risk, the Regulation stops applying to that risk only, so a motorised children’s product is split risk by risk.[1]
- Excluded: the other Article 2(2) exclusions, including weapons, seagoing vessels, military and police equipment, and fairground equipment.
Which machines need a notified body?
Products on Annex I Part A always need one, even with full standards, while Part B products need one unless the harmonised standards or common specifications for their category are applied in full.
Timing is the risk for Part B, because Implementing Decision (EU) 2026/2015, published on September 7, 2026, repeals the Directive’s standards list from January 20, 2027. If the new list is late, Part B products have no internal production control (module A) route until it arrives.
What do manufacturers have to do before January 20, 2027?
Re-run every product through the new route and paperwork, unit by unit. Three questions decide how much work a product needs: does it sit on Annex I, do its safety functions depend on software that can change after sale, and can it be reached over a network?
- Inventory by unit, not by family: list every machine, related product and partly completed machine you will place after January 19, 2027, the date each will be placed, and the importers and distributors handling it. Lines assembled and commissioned at the customer’s site need a cutover decision first. If the same models ship to several markets, this is also where you work out what applies to each, and Daptic tracks changes to the Machinery Regulation and the other EU rules that reach connected machinery, and works out which of them apply to each model in each market.
- Re-run the route against Annex I: Part A products need a notified body from January 20, 2027, while Part B products can self-certify only against cited harmonised standards or common specifications. Confirm your notified body is notified under the Regulation and book its time now.
- Gap-assess against Annex III: start with anything that has remote access or field-updatable safety software, and check it for protection against corruption, the malicious-attempts and logging duties, and the limits on self-evolving behaviour.[1]
- Re-paper bought-in parts: ask suppliers for declarations citing the Regulation for units delivered after the cutover. Treat older declarations of incorporation (the document that accompanies partly completed machinery) as an input to your gap assessment, not as cover.
- Decide on instructions: if you go digital, set up the product marking, a downloadable format, hosting for at least 10 years, a process for paper copies within one month, and paper safety information wherever non-professionals may use the machine.
- Define substantial modification for service and software: a field update or retrofit counts when the manufacturer did not foresee or plan it, it creates a new hazard or raises a risk, and it needs new guards or protective devices requiring a change to the safety control system, or extra protective measures for stability or mechanical strength. Whoever makes such a change becomes the manufacturer, and that can be your service team or your customer.[1]
- Update templates and retention: use one declaration citing 2023/1230 and every other act that applies, and restart your retention clock at 10 years from placing on the market.
What is still uncertain about the Machinery Regulation?
The standards list, Omnibus IV, official guidance and the rules for connected machinery are all still moving, so plan around what has been adopted.
- The standards list: the Commission expects the first list before the end of 2026, carrying over most Directive standards with clarifications where they fall short of the new requirements. If it slips, Part B makers need a notified body and everyone else loses presumption of conformity until it arrives. If the citations carry restrictions on 1.1.9 and 1.2.1, you have to show conformity on cybersecurity and software directly.
- Omnibus IV: this digitalisation proposal would amend Regulation (EU) 2023/1230, among other acts. On July 14, 2026, the negotiated text was approved in committee, and a plenary vote is indicated for November 23, 2026. It has not been adopted, so don’t build your process on it yet.
- A Commission guide: the only published guide covers the Directive (edition 2.3, April 2024). Substantial modification and self-evolving behaviour are the questions a guide to the Regulation needs to settle.
- Connected machinery: radio-connected machines already have to meet the Radio Equipment Directive cybersecurity requirements, which have applied since August 1, 2025. Cyber Resilience Act reporting has applied since September 11, 2026, with its main obligations from December 11, 2027, and AI requirements are due through delegated acts by August 2, 2028. Each brings its own file and declaration entry.
- National penalties: Member States had to notify their rules by October 20, 2026, so check what non-conformity costs in each market you ship to.
Example: applying the Machinery Regulation to a packaging cell
Take a maker of end-of-line packaging cells (case erector, robot palletiser, guarding) that sells across the EU. Here is how walking the parts list against the three questions plays out.
- Route: the cell is not on Annex I, so internal production control (module A) still applies.[1]
- Bought-in safety components: the safety laser scanner and the safety PLC (programmable logic controller) are bought-in Part B safety components, so their conformity is the supplier’s job.[1] The cell maker’s job is to get Regulation declarations for units delivered after the cutover.
- Robot arm: it arrives as partly completed machinery with a Directive declaration of incorporation. It is lawful stock, but the declaration says nothing about 1.1.9 or the new points in 1.2.1, and the finished cell has to meet both.
- Vision system: a camera adjusts the scanner’s muting zones using a trained model. If the model keeps learning in the field, that system can fall under Part A point 6, which needs a notified body. If the model is frozen when the cell ships, it arguably is not self-evolving, but the Regulation does not draw that line for you.
- Remote access: a remote-access gateway for format changes brings in 1.1.9, the malicious-attempts requirement, the five-year upload log and the source code request. Supplier contracts need to give access to the vision firmware’s programming logic, because the authority will ask the cell maker, not the supplier.
Frequently asked questions
When does the Machinery Regulation 2023/1230 apply?
From January 20, 2027, the same day Directive 2006/42/EC is repealed. The date is January 20 rather than January 14 because a corrigendum of July 4, 2023, moved every date in the Regulation by six days.
Do machines already on the market need to meet the new Machinery Regulation?
No. A unit placed on the market under the Directive before January 20, 2027, can still be sold on and used, but every unit placed from January 20 needs a Regulation file and declaration.[1]
Which machines need a notified body under the Machinery Regulation?
The six Annex I Part A categories always do, including safety components and embedded systems with self-evolving behaviour that ensure safety functions. The 19 Part B categories need one unless the harmonised standards or common specifications for that category are applied in full.
Does the Machinery Regulation cover software and AI?
Yes. A safety component can be physical or digital, including software,[1] and requirements for high-risk AI systems are to be added by delegated acts applying by August 2, 2028.
Can machinery instructions be digital under the Machinery Regulation?
Yes, if they are marked on the product, downloadable and online for the expected lifetime and at least 10 years, with a free paper copy within one month if requested at purchase. Essential safety information still goes on paper where non-professionals may use the machine.[1]
Notes and sources
- Regulation (EU) 2023/1230, OJ L 165, June 29, 2023, particularly Articles 2, 3, 8, 9, 10(7), 18, 20(10), 25(4), 52 and 54; Articles 10 and 11 (manufacturers), Article 12 (authorised representatives), Articles 13 and 14 (importers) and Articles 15 and 16 (distributors); Article 2(2)(g) to (i); Annex III, 1.1.9 and 1.2.1; Annex I, Part B, points 15 and 17.
Additional sources:
- Corrigendum, OJ L 169, July 4, 2023)
- Consolidated text as of July 27, 2026
- Regulation (EU) 2026/1744 (Digital Omnibus on AI)
- Directive 2006/42/EC
- Implementing Decision (EU) 2026/2015
- European Commission, harmonised standards for machinery
- European Commission, Machinery
- Procedure 2025/0134(COD), Omnibus IV)
- Regulation (EU) 2024/2847 (Cyber Resilience Act)
- Last reviewed: November 9, 2026.
This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.



