Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

Do you need an EU authorised representative or responsible person?

Do you need an EU authorised representative? See which law applies to your product, who can fill the role, what they must do and what goes on the label.
A checklist card titled Article 4 Economic Operator lists four checked roles: EU manufacturer, importer, authorised representative and fulfilment service provider, on a green banded background.
November 13, 2026

Marc HaddadMarc HaddadForward Deployed Regulatory Engineer

 

Not always, but often. For most technical products, and for consumer products outside the harmonisation laws, EU law requires someone established in the EU to be responsible for four compliance tasks. An EU importer that brings in every unit already fills that role. If you ship directly to EU customers from outside the EU, nobody does until you appoint an EU authorised representative or responsible person.

 

Key points

 

  • The name depends on the law: sector laws such as the Radio Equipment Directive call it an authorised representative, and Regulation (EU) 2019/1020 calls it an economic operator. The General Product Safety Regulation (GPSR) calls it a responsible person, while cosmetics and medical devices have their own roles.
  • Four kinds of operator can fill it: an EU manufacturer, an importer, an authorised representative with a written mandate or, if none of those exists, an EU fulfilment service provider for the products it handles.
  • Check product by product and channel by channel: a direct web shop running next to an importing distributor leaves a gap.
  • Name and postal address on the product: the operator’s name and postal address must appear on the product, its packaging, the parcel or an accompanying document, and an email address alone is not enough.
  • Medical devices are stricter: a manufacturer outside the EU must appoint one sole authorised representative.

What is an EU authorised representative?

 

An EU authorised representative is a person or company established in the EU that holds a written mandate from a manufacturer to act on its behalf for specified tasks.[1] It is the written mandate that creates the role.

 

EU law has no single “representative” role: each law decides whether someone in the EU must act for a manufacturer based outside it, and what that person is called. Some laws also set a minimum that the mandate must cover.

 

Under the Radio Equipment Directive 2014/53/EU (RED), the Low Voltage Directive 2014/35/EU (LVD) and the Machinery Regulation (EU) 2023/1230, the representative must at least do three things. It keeps the EU declaration of conformity (DoC, the manufacturer’s statement that the product meets the law) and the technical documentation available for 10 years. It also provides information when an authority makes a reasoned request and cooperates on action against risks.

 

The mandate has limits: it can’t include the manufacturer’s design and manufacture obligations or the drawing up of technical documentation.[2–4]

 

An authorised representative is also different from an agent for service, which in US practice mainly receives legal papers. An authorised representative holds regulatory tasks, and authorities expect it to produce documents and act on risks.

What is the difference between an authorised representative, an economic operator and a responsible person?

 

An authorised representative is defined by its mandate. The terms “economic operator”, from Article 4 of 2019/1020, and “responsible person”, from the GPSR, name whoever in the EU holds the compliance tasks. That person can be an authorised representative or someone else, such as an importer.

 

The table shows each role, the law behind it, who can fill it, what they must do and what has to appear where.

 

Role Legal basis Products Who can fill it What they must do What must appear, and where
Authorised representative (sector law) For example RED Article 11; LVD 2014/35/EU Article 7; Machinery Regulation (EU) 2023/1230 Article 12 Products under that act Any person established in the EU with a written mandate At least: keep the DoC and technical documentation available for 10 years, provide information on a reasoned request, and cooperate on action against risks Not required on the product under RED or LVD. LVD’s DoC names the manufacturer or its authorised representative (Annex IV, point 2)
Economic operator under Article 4 Regulation (EU) 2019/1020, Article 4 Products under the laws listed in Article 4(5) An EU manufacturer, an importer, an authorised representative with a written mandate for these tasks or, if none of those exists, an EU fulfilment service provider for the products it handles (Article 4(2)) Check that the DoC and technical documentation exist and keep the DoC available. Provide information on a reasoned request, inform the authorities of risks, and make sure corrective action is taken (Article 4(3)) Name, registered trade name or mark, and contact details including postal address, on the product, its packaging, the parcel or an accompanying document (Article 4(4))
Responsible person (GPSR) Regulation (EU) 2023/988, Article 16 Consumer products not subject to harmonisation legislation The same four options (Article 16(1) applies Article 4(2) and (3) of 2019/1020) The Article 4(3) tasks, plus periodic checks that the product matches its technical documentation and labelling, with evidence on request (Article 16(2)) Name and contact details, including postal and electronic address, on the product, packaging, parcel or accompanying document (Article 16(3))
Cosmetics responsible person Regulation (EC) No 1223/2009, Article 4 Cosmetic products For imported products, each importer, or a person in the EU it designates by written mandate, accepted in writing See the Cosmetics Regulation See the Cosmetics Regulation
Medical devices authorised representative Regulation (EU) 2017/745, Article 11 Medical devices One sole authorised representative, mandatory for non-EU manufacturers Jointly and severally liable for defective devices where the manufacturer has not complied with its Article 10 obligations (Article 11(5)); must have a person responsible for regulatory compliance available (Article 15(6)) See the Medical Devices Regulation

Which products need someone in the EU?

 

Three groups need someone in the EU. The first is products covered by a law on the Article 4(5) list of Regulation (EU) 2019/1020. The second is consumer products that no EU harmonisation law covers, which fall under the GPSR. The third is medical devices and cosmetics, which follow their own sector rules.

 

Article 4 has applied since July 16, 2021.[1] The laws on its Article 4(5) list cover machinery, radio and electrical equipment, toys, pressure equipment and more, and most technical products fall under one of them. For these products, no unit may be placed on the market unless an economic operator established in the EU is responsible for the Article 4(3) tasks.

 

The GPSR, Regulation (EU) 2023/988, has applied since December 13, 2024.[5] Its Article 16 sets the same rule for consumer products that are not subject to EU harmonisation legislation (the sector laws, such as RED, that set common EU rules for a type of product). For products subject to harmonisation legislation, the GPSR switches off Chapter III, Section 1, which covers Articles 9 to 18 and includes Article 16.[5] Section 2, which includes Article 19 on distance sales, still applies to those products. This guide doesn’t cover the full GPSR duties.

 

Medical devices and cosmetics have separate roles: under the Medical Devices Regulation, a manufacturer outside the EU must appoint one sole authorised representative. Under the Cosmetics Regulation, the role for imported products sits with each importer, or with a person in the EU that the importer designates by a written mandate accepted in writing.

Do I need an EU authorised representative if I sell through an importer?

 

No, not for Article 4, if an EU importer places every unit on the market, because that importer is the economic operator.[1] The gap opens wherever units reach the EU without one.

 

Article 4 allows four kinds of operator to fill the role:[1]

 

  • EU manufacturer: a manufacturer established in the EU fills the role itself.[1]
  • Importer: the importer fills the role.[1]
  • Authorised representative: it needs a written mandate for the Article 4(3) tasks.
  • EU fulfilment service provider: it fills the role for the products it handles, but only where no manufacturer, importer or authorised representative is established in the EU.[1]

 

Here is how common setups work out:

 

  • An EU distributor buys and imports your goods: the distributor is the importer and fills the role.
  • You hold stock in an EU fulfilment warehouse: the fulfilment service provider can become the responsible operator, but only for the units it handles, so treat it as a fallback, not a plan.
  • You ship parcels from outside the EU straight to consumers: the consumer who receives the parcel is not an importer, and the fulfilment fallback doesn’t cover parcels shipped from outside the EU. Nobody fills the role until you appoint a representative.
  • You sell through several channels: check each one, because a direct web shop next to a distributor channel leaves a gap.

 

National market surveillance authorities (the regulators in each EU country that check products on sale) enforce the rule. The first place they look is the name and address on the product or parcel.

What does an EU representative or responsible person have to do?

 

Under Article 4(3), the operator holds four tasks, starting with checking that the DoC and technical documentation exist and keeping the DoC available. It also provides information on a reasoned request, informs the authorities of risks and makes sure corrective action is taken.

 

The GPSR responsible person has the same four tasks, plus periodic checks that the product matches its technical documentation and labelling, with evidence on request.[5] Sector laws add their own minimum for authorised representatives, such as the 10-year document retention under RED, LVD and the Machinery Regulation.

 

The manufacturer keeps the design work, and your representative can’t draw up or take over the technical documentation. It therefore needs access to yours, plus a named contact on your side who can answer an authority within days.

What has to go on the product label?

 

The name and postal address of the Article 4 or GPSR operator must appear on the product, its packaging, the parcel or an accompanying document. An email address alone does not meet the rule.

 

Article 4 requires the operator’s name, registered trade name or mark, and contact details including a postal address.[1] The GPSR asks for a postal address and an electronic address, so the email address goes alongside the postal address, not instead of it.[5] The GPSR also requires the same details in every online offer.[5]

 

Sector laws differ on where the representative appears. RED and LVD do not require the authorised representative’s name on the product, though LVD’s DoC names the manufacturer or its authorised representative.[3]

How do you work out whether you need an EU representative?

 

Work it out per product, not per company. One business can ship a radio product that falls under Article 4 and an accessory that falls under GPSR Article 16, through two channels that need different answers. Daptic tracks changes to these laws and works out which of them apply to each of your products in each market, so a change to the Article 4(5) list reaches the product lines it affects.

 

  1. List each product with its sales channel: for each product, record who ships it into the EU, under whose name, and from where.
  2. Check where the manufacturer is established: a manufacturer established in the EU fills the Article 4 role itself.[1]
  3. Name the law that covers each product: if any of its laws is on the Article 4(5) list, Article 4 applies. If it is a consumer product that no harmonisation law covers, GPSR Article 16 applies, while medical devices and cosmetics follow their own sector rules.
  4. Check each channel for an EU importer: an importer that places every unit on the market is the Article 4 operator.[1]
  5. Close the gap with a written mandate: before you sign, check four things: the provider is established in the EU, the mandate names the Article 4(3) tasks and any sector minimum, it says who pays for authority requests and recalls, and it says how either side can end it. Check liability too. For products placed on the market or put into service after December 9, 2026, the new Product Liability Directive (EU) 2024/2853 makes the authorised representative liable for defects when the manufacturer is outside the EU.[6]
  6. Mark and list: put the operator’s name and postal address on the product, its packaging, the parcel or an accompanying document. Show the same details in every online offer.[5]
  7. Give your representative what it needs to act: that means access to the DoC and technical documentation, plus a named contact who can answer an authority within days.

What changes are coming?

 

Two adopted laws start applying within the next three months, and two wider reforms are in progress.

 

  • December 9, 2026: the new Product Liability Directive starts applying to products placed on the market after that date, including liability for the authorised representative.[6]
  • January 20, 2027: the Machinery Regulation (EU) 2023/1230 replaces Directive 2006/42/EC and requires the manufacturer’s postal address plus a website, email or other digital contact.[4]
  • Omnibus IV digitalisation: procedure 2025/0134(COD) is provisionally agreed but not yet adopted. It awaits Parliament’s first-reading vote, indicatively on November 23, 2026, and then Council adoption.
  • European Product Act: this combined revision of the New Legislative Framework (NLF, the EU’s common framework for product laws) and Regulation 2019/1020 has been announced but not yet proposed. The European Parliament’s tracker, updated October 25, 2026, shows a Commission proposal indicated for Q4 2026.

Example: a connected oven sold from a web shop outside the EU

 

Here is how the steps apply to one product, in an example that combines two cases. A manufacturer established outside the EU, with no EU subsidiary, sold a Wi-Fi countertop oven (230 V, app-controlled) to EU consumers through its own web shop. The shop showed prices in euro, and each order shipped as a parcel from a warehouse outside the EU. The maker assumed that the CE mark and a support email address were enough.

 

Step 3: the radio module makes the oven radio equipment under RED, and because RED is on the Article 4(5) list, Article 4 applies rather than GPSR Article 16.

 

Step 4: the consumer who receives the parcel is not an importer and no EU warehouse touched the goods, so no Article 4 operator existed.

 

Steps 5 and 6: the maker appointed an authorised representative under a written mandate covering the Article 4(3) tasks. The label now carries the manufacturer’s name and postal address,[2] plus the representative’s name, trade name and postal address.[1] The shop’s product pages show both, with an email address and a product picture.[5]

 

RED doesn’t require the representative’s name on the radio label, but Article 4 does, which is why it is there. If an EU distributor had bought and imported every oven, the distributor would have been the Article 4 operator instead.

Frequently asked questions

Do I need an EU authorised representative if I sell through an EU distributor?

Not for Article 4, if the distributor imports every unit, because the importer is then the economic operator.[1] Check every channel, though, because a direct web shop alongside the distributor leaves a gap.

Can our EU subsidiary be our authorised representative?

Yes, if it is established in the EU and holds a written mandate.[1] If it buys and resells the goods, it is the importer as well.

Does the authorised representative’s name have to be on the product?

Only where a law requires it. Article 4 and GPSR Article 16 each require their operator’s name,[1, 5] while RED and LVD do not require the authorised representative’s name on the product.

Can an EU authorised representative update the technical file?

No, because the manufacturer must draw up the technical documentation itself.[2, 3]

Is an email address enough as the EU contact?

No, because Article 4 requires a postal address,[1] and the GPSR asks for an electronic address in addition to the postal one, not instead of it.

Can an EU fulfilment centre act as our responsible operator?

Only as a fallback. A fulfilment service provider is the Article 4 operator only for the products it handles, and only where no manufacturer, importer or authorised representative is established in the EU.[1]

Notes and sources

 

  1. Regulation (EU) 2019/1020, particularly Articles 3(12), 4 and 44.
  2. Directive 2014/53/EU (RED), particularly Articles 10(7) and 11(1).
  3. Directive 2014/35/EU (LVD), particularly Article 7(1); Annex IV, point 2.
  4. Regulation (EU) 2023/1230 (Machinery), particularly Articles 10(6) and 12(1).
  5. Regulation (EU) 2023/988 (GPSR), particularly Articles 2(1)(b), 16, 19 and 52.
  6. Directive (EU) 2024/2853 (Product Liability), particularly Articles 2(1) and 8(1)(c).

 

Additional sources:

 

 

This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today