UN 38.3: the lithium battery tests you need before you can ship

Marc HaddadForward Deployed Regulatory Engineer
UN 38.3 is the series of eight transport tests in sub-section 38.3 of the UN Manual of Tests and Criteria that every lithium cell and battery type must pass before it can be shipped by road, rail, sea or air. It applies to battery makers and to any product that contains or ships with lithium cells.
Key points
- UN 38.3 is a transport requirement, not a product approval. Passing it lets a battery type be shipped, but it doesn’t make a product legal to sell in any market.
- The tests attach to each cell and battery type, so a pack built from tested cells still needs its own testing, and a new cell supplier means a new type.
- The manufacturer and every later distributor of the cells or batteries must make a test summary available, and that summary is what carriers, forwarders and customers ask for.
- A device with a built-in battery still ships under the lithium battery rules, though small cells and batteries get lighter packaging and marking requirements.
What is UN 38.3?
UN 38.3 is a set of design tests showing that a lithium cell or battery type can survive transport without catching fire, rupturing or coming apart. The tests cover low pressure, temperature swings, vibration, shock and electrical abuse.
The tests sit in part III of the UN Manual of Tests and Criteria, published by the United Nations and maintained by its Committee of Experts on the Transport of Dangerous Goods. The current version is the eighth revised edition from 2023, with Amendment 1 published in 2025. The Manual only describes the tests. The duty to pass them comes from the transport rules that refer to it.
People often ask about “UN 38.3 certification,” but no authority issues a UN 38.3 certificate. In the US, for example, the rules require the type to be proven to meet sub-section 38.3, a record of the testing, and a test summary.[1]
It’s also not a product safety approval. Selling a battery or a battery-powered product is governed by product rules and standards such as IEC 62133-2 or UL 2054, and in the EU by Regulation (EU) 2023/1542 on batteries, which we cover in a separate article on the EU Battery Regulation.
Which transport rules require UN 38.3 testing?
Every mode of transport requires it, through rules that all trace back to the UN Recommendations on the Transport of Dangerous Goods, known as the Model Regulations. The UN writes the model, and each mode and country turns it into binding law on its own timetable:
- Road and rail in Europe: the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) and its rail counterpart, RID.
- Sea: the International Maritime Dangerous Goods (IMDG) Code.
- Air: the International Civil Aviation Organization (ICAO) Technical Instructions, which airlines apply through the IATA Dangerous Goods Regulations, an industry manual built on them.
- United States: the Hazardous Materials Regulations in title 49 of the Code of Federal Regulations (49 CFR), administered by the Pipeline and Hazardous Materials Safety Administration (PHMSA).
These rules don’t all point to the same edition at the same time. The UN’s current Model Regulations are the 24th revised edition (2025), while the US rules still incorporate the seventh revised edition of the Manual with its 2021 amendment.[2] PHMSA proposed moving to the eighth edition on February 10, 2026,[3] and on October 27, 2026, it proposed adopting the eighth edition with Amendment 1 instead, with comments due by December 28, 2026.[4] Neither proposal is final, so the US references haven’t changed yet.
A new edition doesn’t force you to retest. Under the US rules, cells and batteries made to a type that met any edition from the third revised edition with Amendment 1 onward, as it applied on the date of testing, may still be transported.[1] What a new edition changes is the test you run on the next new type. If you ship into several markets, Daptic tracks regulatory changes like these across jurisdictions, flags the ones that affect your products and works out which requirements apply to each product in each market.
What are the eight UN 38.3 tests?
There are eight tests, numbered T.1 to T.8, and a type passes only if it passes every test that applies to it. The table shows what each test simulates, what it is run on, and what counts as a pass.[5]
| Test | What it simulates | Run on | Passes if |
|---|---|---|---|
| T.1 Altitude simulation | Low air pressure, as in an unpressurized aircraft hold | Cells and batteries | No leakage, venting, disassembly, rupture or fire, and mass and open-circuit voltage stay within set limits |
| T.2 Thermal test | Rapid swings between hot and cold | Cells and batteries | Same as T.1 |
| T.3 Vibration | Vibration on a vehicle, ship or aircraft | Cells and batteries | Same as T.1 |
| T.4 Shock | Knocks and drops in handling | Cells and batteries | Same as T.1 |
| T.5 External short circuit | A short across the terminals at a raised temperature | Cells and batteries | Outer temperature stays under a set limit, with no disassembly, rupture or fire |
| T.6 Impact or crush | Mechanical damage that could short the cell internally | Cells, including those used in batteries | Outer temperature stays under a set limit, with no disassembly or fire |
| T.7 Overcharge | Charging beyond the design limit | Rechargeable batteries | No disassembly or fire |
| T.8 Forced discharge | A weak cell driven into reverse by others in a pack | Cells | No disassembly or fire |
The Manual sets how many samples each test needs, depending on whether you are testing cells or batteries and primary or rechargeable chemistry.
A battery is tested even when its cells are of a tested type, and a battery made of a single cell is treated as a cell.[1] Outside the tests, each cell and battery above the small-battery limits needs a venting device or a design that prevents violent rupture, protection against external short circuits, and protection against dangerous reverse current where cells are connected in parallel.[1] Those last two are pack design features, such as fuses and diodes, so they belong on the drawing and not only in the lab report. For batteries sold in the EU, the battery passport is a separate requirement from transport testing.
Who needs a UN 38.3 test summary?
Each manufacturer and later distributor of lithium cells or batteries must make a test summary available. Under the US rules, this covers cells and batteries made on or after January 1, 2008, except button cells installed in equipment, including circuit boards.[1] The summary must give:
- the cell, battery or product manufacturer’s name and contact details;
- the test laboratory’s name and contact details;
- a unique test report number and the report date;
- a description of the cell or battery: lithium ion or lithium metal, mass, watt-hour rating or lithium content, a physical description and the model number;
- the tests run and whether each was passed;
- a reference to the assembled battery provisions, if used;
- the edition and amendment of the Manual used; and
- the name and title of a responsible person.
The summary isn’t the test report. The report is the lab’s full record of conditions and results, and the manufacturer keeps that record for as long as the design is offered for transport, plus one year, and shows it to government inspectors on request.[1] The summary is the short version that travels down the supply chain.
Where it gets complicated is the match. A summary can be issued for the cell, the battery or the product that contains it, and only its model number tells you which. A cell summary doesn’t cover the pack, and a summary for a 10-cell pack doesn’t cover the 12-cell variant. If you buy a finished pack or device from an original equipment manufacturer (OEM) and sell it under your brand, you are a later distributor, so get the summary and check that its model number, watt-hour rating and mass match what you ship.
The US rules ask for the lab’s name but don’t require the lab to be accredited. Some customers and carriers set their own expectations, often a lab accredited to ISO/IEC 17025, so ask before you book testing.
When does a lithium battery need retesting?
You retest when a change makes the cell or battery a new type. The Manual treats a cell or battery as a new type when a change goes beyond set margins or could cause it to fail one of the tests.[5]
On a parts list, the triggers look like this:
- New cell supplier or cell part number: a new cell type, and because batteries are tested even when built from tested cells, a new battery type too.
- More or fewer cells, or a new series and parallel layout: a change in energy or voltage, usually beyond the margins.
- Protection circuit, fuse or enclosure changes: not automatically a new type, but they bear directly on the short circuit, overcharge, vibration and shock tests, so they need a documented assessment.
- Labels, colors and cosmetic housing changes: normally no new type.
Tie this to your engineering change process. Every change to a battery line in the bill of materials should prompt the question “is this a new type?”, with the answer and the reasoning kept on file.
How does UN 38.3 apply to cells, packs and devices?
The testing duty is the same whether the battery ships alone or inside a product. What changes is the UN number, the packaging and the marking. The table shows the four shipping entries most products fall under, all in Class 9, miscellaneous dangerous goods.
| How it ships | Lithium ion | Lithium metal |
|---|---|---|
| Cells or batteries on their own, including spares | UN 3480 | UN 3090 |
| Batteries packed with equipment, in the same box but not installed | UN 3481 | UN 3091 |
| Batteries contained in equipment | UN 3481 | UN 3091 |
Size decides how heavy the shipping rules are. In the US, lithium ion cells up to 20 watt-hours (Wh) and batteries up to 100 Wh, and lithium metal cells up to 1 gram (g) of lithium and batteries up to 2 g, ship with lighter packaging and marking, with higher limits for highway or rail only.[1] The watt-hour rating is the rated capacity in ampere-hours multiplied by the nominal voltage, and in the US every lithium ion battery must have it marked on the case since May 10, 2024.[1]
By air, US rules require lithium ion cells and batteries shipped on their own to be offered at a state of charge of no more than 30% of their rated capacity.[6] The 2025-2026 ICAO Technical Instructions extended that limit to lithium ion batteries over 2.7 Wh packed with equipment and recommended it for batteries contained in equipment, and PHMSA proposed a matching change on February 10, 2026.[3]
By product category:
- Electronics and radio equipment: most phone, laptop and wireless device batteries sit under 100 Wh, so they use the small-battery provisions, but each battery still needs a tested type and a summary.
- Toys and children’s products: coin and button cells must still be of a tested type, but in the US button cells installed in equipment need no test summary, and packages with only button cells in equipment need no lithium battery mark.[1]
- Machinery, power tools, e-bikes and energy storage: packs over 100 Wh are fully regulated, which means packaging tested to the Packing Group II performance level, Class 9 labels and shipping papers.[1]
- Vehicles: recent UN editions added separate entries for battery-powered vehicles (UN 3556 for lithium ion and UN 3557 for lithium metal), which PHMSA proposed adopting on February 10, 2026.[3]
Low production runs, meaning no more than 100 cells or batteries a year, and prototypes shipped for testing are exempt from the testing and record duties in the US. They ship under stricter packaging conditions with a note on the shipping papers.[1]
How do you get UN 38.3 testing done?
Start from what you ship, not from the lab:
- List every battery line: for each product, the cell part number and supplier, the pack design, the watt-hour rating or lithium content, and whether it ships alone, packed with or contained in equipment.
- Collect supplier summaries: if cells or packs arrive already tested, check each summary’s model number, rating and Manual edition against your list.
- Choose a lab: confirm the accreditation your customers and carriers expect, and the Manual edition the lab will test to.
- Plan samples and time: the Manual sets the sample counts, and the tests take time, so plan for several weeks.
- Issue and keep the paperwork: publish the test summary, signed by a responsible person, and keep the full report for as long as the design ships, plus one year.
- Recheck at every change: run the new-type question each time a battery line changes.
Example: a power tool and e-bike maker changes cell supplier
Here is an example of applying this article to a product. It’s a composite, not one company.
A maker of cordless tools and e-bikes adds a second cell supplier during a shortage. The new cells have the same size and nearly the same capacity, so purchasing approves them and the old pack summaries stay on the website.
Walk the parts list and the answer changes. The new cell is a new cell type, and its supplier provides a cell summary. Each pack built from it is a new battery type, because batteries are tested even when their cells are. The tool packs are under 100 Wh and the e-bike pack is well over, so the e-bike pack is fully regulated, and spare e-bike packs ship as UN 3480 at 30% state of charge by air.
The gap surfaces when a retailer’s freight forwarder asks for a summary matching the model number on the carton, and the only summary on file names the old pack. The fix is a new pack model number for each pack that uses the second-source cell, lab testing of each pack, new summaries, and a change control rule that ties every cell source to its own pack model.
Frequently asked questions
Is UN 38.3 a certification?
No. No authority issues a UN 38.3 certificate. The transport rules require the cell or battery type to pass the tests, a record of the testing, and a test summary.
Does a product with a built-in battery need UN 38.3?
Yes. The battery inside must be of a tested type, and the product ships as lithium batteries contained in equipment, UN 3481 or UN 3091.
Who has to provide the UN 38.3 test summary?
The manufacturer and every later distributor of the cells or batteries. In the US this covers cells and batteries made on or after January 1, 2008, except button cells installed in equipment.
Do I need to retest if I change cell supplier?
Yes, in almost every case. A new cell is a new cell type, and batteries built from it must be tested as new battery types.
Does a new edition of the UN Manual mean retesting?
No. Under the US rules, a type tested to any edition from the third revised edition with Amendment 1 onward may still be transported.
Does passing UN 38.3 let me sell the product?
No. It’s a transport test. Product safety rules and standards such as IEC 62133-2 or UL 2054 apply separately.
Notes and sources
- 49 CFR 173.185, particularly § 173.185(a)(1); § 173.185(a)(1)(i); § 173.185(a)(4); § 173.185(a)(3); § 173.185(a)(2); § 173.185(c)(1); § 173.185(a)(5); § 173.185(b)(3); § 173.185(e).
- 49 CFR 171.7, particularly § 171.7(dd).
- 91 FR 5996 (HM-215R proposed rule, February 10, 2026)
- 91 FR 67720 (HM-215S proposed rule, October 27, 2026)
- UN Manual of Tests and Criteria, eighth revised edition (2023) and Amendment 1 (2025), particularly paragraph 38.3.2.2.
- 49 CFR 172.102, particularly § 172.102.
Additional sources:
This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.



