UFLPA: how the US forced-labor import ban gets shipments detained

Michelle NgSenior Regulatory Analyst
The Uyghur Forced Labor Prevention Act (UFLPA) is a US law that presumes goods made wholly or in part in China’s Xinjiang region, or by companies on a government Entity List, were made with forced labor and are barred from entry. US Customs and Border Protection (CBP) can detain such shipments until the importer proves otherwise.
Key points
- The law follows inputs, not the assembly point: A product finished in Vietnam or Mexico is covered if any input in it traces back to Xinjiang or to a listed company.
- The importer carries the burden: Goods are presumed barred unless the importer shows the law does not apply or rebuts the presumption with clear and convincing evidence.
- The Entity List keeps growing: It named 190 entities after the latest additions took effect on October 29, 2026.
- Shipment-level records release goods: A general supplier statement does not trace a shipment; records linking that shipment’s materials to their sources do.
- The evidence has to exist before the detention: CBP’s review clock starts when goods are presented for examination, which leaves little time to build a multi-tier trace from scratch.
What is the Uyghur Forced Labor Prevention Act?
The UFLPA is a federal law, Public Law 117-78, that decides in advance which goods fall under an existing US ban on forced-labor imports. It was signed on December 23, 2021, and its presumption has applied since June 21, 2022.[1]
The ban itself is Section 307 of the Tariff Act of 1930, which says goods mined, produced or manufactured wholly or in part by forced labor are not entitled to entry at any US port.[2] The UFLPA adds that goods made wholly or in part in the Xinjiang Uyghur Autonomous Region, or by an entity on the UFLPA Entity List, are presumed to fall under that ban.[1] Manufacturers that also sell into Europe can compare how the EU Forced Labour Regulation handles the same problem.
A rebuttable presumption is a conclusion the law treats as true until someone disproves it, and here the burden sits with the importer of record (the business legally responsible for the import). CBP’s Commissioner can grant an exception only if the importer has fully complied with the government’s guidance, completely answered every CBP request for information, and shown by clear and convincing evidence that no forced labor was involved.[1] CBP describes that as a higher standard than a preponderance of the evidence, the “more likely than not” test used in most civil matters.[3]
Who enforces the UFLPA?
CBP enforces the UFLPA at US ports, while the Forced Labor Enforcement Task Force (FLETF), an interagency group whose work the Department of Homeland Security (DHS) publishes, decides who goes on the Entity List and which industries get the closest scrutiny.
The law required the FLETF to write a strategy that includes the Entity List, enforcement plans for high-priority sectors and guidance for importers on due diligence and supply chain tracing.[1] The first strategy was published on June 17, 2022, with updates each year since, the latest on August 19, 2025.[4, 5] CBP’s own operational guidance, last revised in June 2026, sets out its procedures and recommends supply chain documentation for the high-priority sectors.[6]
What is the UFLPA Entity List?
The UFLPA Entity List is the public list of companies whose goods are presumed barred from the United States, wherever those goods are made. It named 190 entities after the latest additions took effect on October 29, 2026.[7, 8]
The law defines who belongs on the list, and DHS publishes it in sections that follow those definitions. The table shows what each section covers.
| Entity List section | Who it covers |
|---|---|
| Section 2(d)(2)(B)(i) | Entities in Xinjiang that mine, produce or manufacture goods wholly or in part with forced labor |
| Section 2(d)(2)(B)(ii) | Entities working with the Xinjiang government to recruit, transport, transfer, harbor or receive forced labor or members of persecuted groups out of the region |
| Section 2(d)(2)(B)(iv) | Entities exporting goods made by the first two groups from China to the United States; DHS says companies in those groups may also be exporters and has named no others |
| Section 2(d)(2)(B)(v) | Facilities and entities, including the Xinjiang Production and Construction Corps, that source material from Xinjiang or from people working with its government on “poverty alleviation” or “pairing-assistance” programs |
The FLETF’s member agencies add an entity by majority vote, and each addition takes effect on a published date, from which CBP applies the presumption.[9] In 2026, 43 companies were added with effect from August 3 and three more from October 29.[7, 8] Unnamed subsidiaries of a listed company are not automatically covered, though CBP may still examine their goods, and a listed entity can ask to be removed; a refusal cannot be appealed, but a new request with new information can be made.[9]
Does the UFLPA apply to goods made outside China?
Yes. DHS’s guidance says the presumption applies to goods made in or shipped from other countries if any part or input was produced in Xinjiang, and goods made by a listed entity are covered wherever they are produced.[9] CBP has said it is focused on transshipped goods with Xinjiang inputs.[3]
This is where manufacturers most often misjudge their exposure. The question is not where a product was assembled or what its country of origin is for marking and duties, but whether any material inside it, several tiers down, came from Xinjiang or a listed company. A machine assembled in Mexico or a garment sewn in Vietnam is exposed if the steel or cotton in it is.
The FLETF has named 12 high-priority sectors, and the table shows where each tends to turn up in finished goods.[4, 5]
| High-priority sector | Where it can appear in finished products |
|---|---|
| Cotton and cotton products; apparel | Clothing, textiles, toys and children’s products with fabric |
| Silica-based products, including polysilicon | Solar cells and semiconductors |
| Aluminum | Housings, frames, heat sinks, vehicle and machinery parts |
| Copper | Wire, cable, motors, circuit boards |
| Steel | Machinery, appliances, fasteners, vehicle parts |
| Lithium | Batteries in electronics, tools and vehicles |
| Polyvinyl chloride (PVC) | Cable insulation, flooring, plastic toys, tubing |
| Caustic soda | A processing chemical in aluminum, textile and paper production |
| Tomatoes and downstream products; red dates (jujubes); seafood | Food products and ingredients |
The sectors show where enforcement looks hardest, but they are not the limit of the law. Any Xinjiang input triggers the presumption, and the Entity List includes companies outside these sectors, such as the genomics companies added in October 2026.[7, 8] Electrical and electronic products, radio equipment included, tend to touch the most sectors at once, through copper, aluminum, PVC insulation, lithium batteries and polysilicon. For children’s products and toys the usual exposure is cotton and PVC, and for machinery and vehicles it is steel, aluminum and copper.
How does a UFLPA detention work?
A UFLPA detention starts when CBP holds a shipment at entry and sends the importer a notice, after which the importer has a limited time to answer before the goods are excluded. The steps run in this order.
- Selection: CBP picks shipments for examination through its own risk assessment, which it does not publish; the Entity List and the high-priority sectors show where it looks.
- Detention: Within five days (excluding weekends and holidays) after goods are presented for examination, CBP must decide whether to release or detain them, and it must send a notice of detention within five days of deciding.[10] Under the UFLPA, the notice gives the basis for the detention and lists the information CBP wants.[3]
- Response: The importer can request an applicability review, request an exception, or export the goods, as long as they are not subject to seizure.[9] CBP refers to an initial 30-day detention period, and any extension must be requested before it ends.[3]
- Decision: CBP releases or excludes the goods. If it has not decided within 30 days after the goods were presented, the law treats that as an exclusion, which can be protested to CBP within 180 days.[10, 11]
- Seizure: CBP may also seize and forfeit shipments within the UFLPA’s scope.[9]
CBP reports that a complete response package takes two to three weeks to review on average, and that shipments matching a supply chain it has already cleared have averaged 10 to 14 days.[3]
What is the difference between an applicability review and an exception?
An applicability review argues that the UFLPA does not apply because the goods have no link to Xinjiang or a listed entity, while an exception accepts that the presumption applies and tries to overcome it.[3] They call for different proof.
An applicability review shows where every input came from. An exception must meet all three statutory conditions, including clear and convincing evidence about labor conditions, and the Commissioner must report each exception granted, with the evidence considered, within 30 days.[1] For most manufacturers the realistic route is the first one, showing that inputs came from somewhere else, because proving the absence of forced labor at a Xinjiang facility is a far harder case to make.
What evidence gets UFLPA-detained goods released?
Records that trace the detained shipment’s materials from raw material to finished good are what get it released. CBP groups the documents it looks for into three kinds:[3]
- Transaction and supply chain records: Packing lists, bills of lading and manifests showing the origin of the goods and their components.
- Records of the parties: Documents identifying each business in the transaction, with a list of suppliers and the role each played.
- Payment and transport records for raw materials: Invoices, contracts and proof of payment showing how raw materials were bought and moved.
CBP considers the totality of what an importer provides, including laboratory test results as one part of the package.[3] A supplier’s general declaration of no Xinjiang content does not show where the copper or cotton in a particular lot came from, and that link between a specific shipment and specific source records is what a review turns on. The hard part is usually upstream: a component maker that buys the same material from several sources and mixes it may not be able to say which source went into which lot.
How should manufacturers prepare before a UFLPA detention?
Preparation means having the trace on file before a shipment is held, because building records from several tiers of suppliers takes longer than the detention period allows.
- Map the supply chain for products that touch a high-priority sector down to the raw material, naming each supplier and its role.
- Screen suppliers and sub-suppliers against the Entity List, and again after each addition.
- Write record-keeping into supplier contracts: lot-level invoices, production records and permission to pass them to CBP.
- Keep a response file for each product line, and decide in advance who chooses between a review and export when a notice arrives.
The rules move in several places at once: Entity List additions published in the Federal Register, the FLETF’s annual strategy updates and any new sectors, revisions to CBP’s guidance, and CBP’s UFLPA statistics dashboard.[7, 12] Daptic tracks regulatory changes like these across jurisdictions and flags the ones that affect a company’s products, which is one way to keep up with UFLPA Entity List and guidance changes without checking each source by hand.
Example: applying the UFLPA to a product
Consider a composite case. A US company imports an industrial motor controller assembled in Southeast Asia, with an aluminum housing, circuit boards and a wiring harness of copper wire in PVC insulation. CBP detains a shipment, and the notice asks for supply chain records.
The harness maker had signed a statement that its products contain no Xinjiang content. That does not trace the lot, so the importer works down the bill of materials. The housing is straightforward, since mill certificates and invoices tie its aluminum to a smelter outside China. The harness is not: its PVC compound came from a compounder that buys resin from several producers, one of which is on the Entity List, and the compounder cannot show which resin went into this batch.
Without that link the importer cannot complete an applicability review, so it exports the shipment. For later orders it requires single-source compound with lot records, and it keeps a file for each product so the next review starts from documents already in hand.
Frequently asked questions
Does the UFLPA apply to goods made outside China?
Yes. The presumption covers goods made in or shipped from any country if any input was produced in Xinjiang, and goods made by a listed entity wherever they are produced.
How long can CBP hold a shipment under the UFLPA?
Up to 30 days after the goods are presented for examination, after which the law treats the lack of a decision as an exclusion that can be protested within 180 days. Importers can ask for an extension before the initial 30-day period ends.
Is a supplier declaration enough to get goods released?
No. CBP weighs the whole package, and a general declaration does not show where the materials in a specific shipment came from.
How many companies are on the UFLPA Entity List?
The list named 190 entities after the latest additions took effect on October 29, 2026, and it grows with each Federal Register notice.
Can detained UFLPA goods be exported instead?
Yes, as long as they are not subject to seizure. Exporting resolves that shipment but does not clear the supply chain for the next one.
Notes and sources
- Uyghur Forced Labor Prevention Act, Public Law 117-78, particularly Sections 3(a) and 3(e); Sections 3(b) and 3(c); Section 2(d).
- 19 U.S.C. 1307 (Section 307 of the Tariff Act of 1930)
- U.S. Customs and Border Protection, FAQs: Uyghur Forced Labor Prevention Act (UFLPA) Enforcement, last modified September 9, 2025
- Department of Homeland Security, UFLPA Strategy and annual updates
- Department of Homeland Security, 2025 Updates to the UFLPA Strategy, August 19, 2025
- U.S. Customs and Border Protection, Forced Labor Enforcement Operational Guidance for Importers, Publication 5359-0126, June 2026
- Department of Homeland Security, UFLPA Entity List, last updated October 28, 2026
- Department of Homeland Security, news release of October 28, 2026
- Department of Homeland Security, UFLPA Frequently Asked Questions, last updated September 16, 2025
- 19 U.S.C. 1499
- 19 U.S.C. 1514
- U.S. Customs and Border Protection, UFLPA statistics dashboard
Additional sources:
- Department of Homeland Security, news release of July 31, 2026
- U.S. Customs and Border Protection, Uyghur Forced Labor Prevention Act
This article reflects Michelle Ng’s independent opinions, not necessarily those of Daptic.



