Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

EU Forced Labour Regulation: what manufacturers need to do before it applies

Learn what the EU Forced Labour Regulation requires of manufacturers, who it covers, when it applies in December 2027 and seven steps to prepare.
A green card titled Forced Labour Regulation listing five key dates for Regulation (EU) 2024/3015, with 14 December 2027, when the ban applies, marked as the deadline.
November 11, 2026

Marc HaddadMarc HaddadForward Deployed Regulatory Engineer

 

The EU Forced Labour Regulation, Regulation (EU) 2024/3015, bans placing or making available on the European Union (EU) market, or exporting, any product made wholly or partly with forced labour. It applies from December 14, 2027, to manufacturers, importers, distributors, retailers and exporters of any size, and it is enforced product by product rather than through reporting.

Key points

 

  • Any stage, any share: The ban covers forced labour at any stage, from extracting the raw material through to final assembly, with no minimum share.
  • No size threshold: Small and medium-sized enterprises (SMEs) are in scope, and size only affects how authorities prioritise cases and the time limits they set.
  • No filing, but evidence matters: There is no registration, audit or reporting duty, yet the first thing an investigating authority asks for is what you did about forced labour risks.
  • Stock is not grandfathered: Products produced or imported earlier are covered if they are placed or made available from December 14, 2027.
  • Decisions do the removing: A specific product is ordered off the market only by a decision taken after an investigation, with at least 30 working days to comply.

What is the EU Forced Labour Regulation?

 

It is an EU market ban on products made with forced labour. Regulation (EU) 2024/3015 was signed on November 27, 2024, has been in force since December 13, 2024, and its prohibition applies from December 14, 2027.

 

The prohibition has three parts.[1] You may not place a product made with forced labour on the EU market, which means making it available in the EU for the first time.[1] You may not make it available, which covers every supply in the course of a commercial activity, so it reaches distributors and retailers too.[1] And you may not export it.

 

It is not a due diligence or reporting law. The European Commission’s guidelines call it “an obligation of result,” meaning what counts is whether forced labour is in the product, not whether you followed a set process.[2]

 

The ban is one piece of the wider set of EU sustainability rules for products, alongside the Digital Product Passport and the deforestation rules, which each have their own guide.

Who does the EU Forced Labour Regulation apply to?

 

It applies to anyone who makes, imports, distributes or sells a physical product in the EU, or exports one from it. The table shows what the regulation asks of each actor in the chain.

 

Actor What the regulation asks of them
Manufacturer placing products on the EU market Do not place or make available products made with forced labour (Article 3). Answer information requests within 30 working days in the preliminary phase (Article 17(2)), and within the 30 to 60 working days set in an investigation (Article 18(4)). Comply with any decision.
Importer The same prohibition. Placing on the market means the first making available in the EU (Article 2(5)).
Distributor or retailer Making available covers every supply in the course of a commercial activity (Article 2(4)). Withdraw products and remove online listings when a decision orders it (Article 20(4)(b)).
Online seller, including one outside the EU Offers aimed at EU end users count as making available (Article 4).
Exporter Exporting products made with forced labour is prohibited, including products made in the EU (Article 3).
Supplier at any tier No prohibition of its own unless it is also an economic operator, but the lead authority can still send it information requests (Article 17(1)).
European Commission Leads investigations into forced labour outside the EU (Article 15(1)), adopts those decisions by implementing act (Article 20(6)), and runs the database, guidelines and portal (Articles 8, 11 and 12).
National competent authorities Lead investigations into forced labour on their territory, enforce decisions and apply national penalties (Articles 15(2), 23 and 37).
Customs Can suspend release or export, and must refuse it for products covered by a decision. Release is not proof of compliance (Articles 28 to 30, Article 29(2)).

 

No size threshold: Every economic operator (the regulation’s term for the businesses it binds) is in scope, SMEs included. Size counts in how authorities prioritise investigations and in the time limits a decision sets, not in whether the ban applies.[1]

 

Importers of finished goods are covered: If you only import finished units, you are an economic operator placing them on the market, and the same prohibition applies.[1]

When does the EU Forced Labour Regulation apply?

 

The prohibition applies from December 14, 2027, and several milestones fall before and after that date.

 

  • June 14, 2026: deadline for the Commission’s database of forced labour risk areas and products,[1] which is online but still marked as in development.
  • December 14, 2026: Member States notify their penalty rules to the Commission.[1]
  • December 14, 2027: the regulation applies, and the Commission’s single information submission point opens.
  • December 14, 2029: first evaluation, including whether a remediation mechanism is needed.[1]

 

The Commission may also adopt delegated acts (secondary rules made under powers the regulation gives it) naming product groups for which customs would require additional information.[1] At the time of review, no proposal to delay or amend the regulation had been published.

 

What matters for your stock is when a product is placed or made available, not when it was made, so parts you buy in 2026 are in scope. Only products already with end users are outside the ban.[1]

Is the EU Forced Labour Regulation a due diligence law?

 

No. The regulation creates no due diligence obligations beyond those that already exist,[1] but your due diligence record is what you will rely on if an authority investigates.

 

Due diligence here means the process of finding and dealing with forced labour risks in your supply chain, and the regulation prescribes an outcome rather than that process. In practice, though, the first thing a lead authority asks for is what you did to identify, prevent, mitigate, bring to an end or remediate forced labour risks.[1]

 

A separate law does prescribe a process for the largest companies. The Corporate Sustainability Due Diligence Directive (CSDDD) was amended by Directive (EU) 2026/470, adopted on February 24, 2026, and as amended it covers only companies above 5,000 employees and EUR 1.5 billion turnover, and only from July 26, 2029. If your company is in its scope, those process duties run alongside the ban.

 

The US rule works the other way round. The Uyghur Forced Labor Prevention Act (UFLPA, Public Law 117-78) presumes that goods made wholly or partly in Xinjiang, or by listed entities, cannot be imported unless the importer rebuts that presumption. The EU regulation has neither a presumption nor a list, and the authority carries the burden of proof.[1]

How does an EU forced labour investigation work?

 

An authority ranks suspected cases, asks the companies involved for information, then decides. The Commission leads where the suspected forced labour is outside the EU,[1] and a Member State’s national competent authority leads where it is on that state’s territory.[1]

 

  1. Prioritisation: Cases are ranked by the scale and severity of suspected forced labour (including state-imposed forced labour), the quantity or volume placed on the market, and the share of the suspect part in the final product.[1]
  2. Preliminary phase: The lead authority can send information requests to economic operators and to suppliers at any tier,[1] and you have 30 working days to answer.[1]
  3. Investigation: Requests in an investigation carry a deadline of 30 to 60 working days set by the authority.[1] Investigations may target a part, a product series or one factory’s output.[2]
  4. Decision: If you refuse to cooperate, miss a deadline without valid justification or give misleading information, the authority can decide on the other facts it has.[1] For forced labour outside the EU, the Commission adopts the decision by implementing act, which is a binding Commission measure.[1]

What happens if a product is found to involve forced labour?

 

A decision orders the product off the EU market and stopped at the border, and you get at least 30 working days to comply.[1]

 

  • Withdraw and delist: Products are withdrawn and online listings removed.[1]
  • Dispose: Disposal means recycling the products or rendering them inoperable.[1]
  • Customs block: Customs can suspend release or export, and must refuse it for products covered by a decision.[1]
  • Review: A request for review can be filed at any time with new substantial information and is decided within 30 working days.[1]
  • Penalties: Failing to comply with a decision is penalised under rules set nationally,[1] so up to that point your exposure is losing the product and paying for its disposal.

Does the type of product change the rules?

 

No, the prohibition is the same for every product, but three things differ.

 

  • Replaceable parts: If the tainted part can be replaced, as with a motor in machinery, electrical and electronic equipment or vehicles, the disposal order covers that part only. The decision names the parts to replace before the product can be sold again.[1] A product that cannot be taken apart, such as a moulded toy or a garment, is disposed of whole.
  • Perishable goods: For food, plants or animals, the minimum time to comply with a decision drops from 30 to 10 working days.[1]
  • Strategic supply chains: For supply chains of strategic or critical importance, the authority can order products to be withheld instead of disposed of.[1]

What do manufacturers need to do before December 14, 2027?

 

Map what you sell, trace the riskiest inputs, and set up the contracts, records and processes that let you answer an authority within 30 working days. The seven steps below cover it.

 

  1. Inventory by product line and channel: List every product you will place on the EU market or export after December 14, 2027, with its parts list down to raw materials. Record the channels each one uses, such as retail, web shop and export.
  2. Rank inputs the way authorities will: Use the same criteria authorities rank cases by, which are scale and severity, volume, and the share of the input in the final product.[1] Then add matches against the Commission’s database and the risk indicators in the Commission’s guidelines.[2]
  3. Trace the top-ranked inputs three tiers down: Follow the highest-ranked inputs through your suppliers and their suppliers.
  4. Write information rights into contracts: Your suppliers have to help you meet a 30-working-day deadline, so contracts need traceability data, audit access and an obligation to pass requests down the chain.
  5. Keep records that let a decision stay narrow: Because investigations may target a part, a product series or one factory’s output, lot-level traceability on replaceable parts means a decision can hit one part instead of the whole product.
  6. Set up a response process: Name an owner, draft templates and keep evidence ready. If you refuse to cooperate, miss a deadline without valid justification or give misleading information, the authority can decide on the other facts it has.[1]
  7. Set up a withdrawal and disposal process: Know how you would pull stock, remove listings, and recycle or render products inoperable within the time a decision allows.

 

None of this stays fixed: the guidelines are updated regularly,[1] the database grows, and penalty rules arrive one Member State at a time. Daptic tracks these changes across jurisdictions and flags which of your product lines and markets each one reaches, and you can see how Daptic matches forced labour rules to your products.

What do manufacturers get wrong about the forced labour ban?

 

  • Waiting for an investigation: You must not place tainted products on the market whether or not anyone is looking.[2]
  • Assuming a small share is fine: “In whole or in part” has no de minimis threshold, meaning no minimum share below which it is ignored.[2]
  • Treating the database as a ban list: It is indicative and non-exhaustive,[1] so absence from it is not clearance.
  • Relying on customs clearance: A shipment cleared once can still be banned later.[1]
  • Counting on old stock: Products made or imported before December 14, 2027, are still covered if placed or made available after it.[2]

Example: applying the regulation to a kitchen appliance

 

Here is how the steps work for one product: a countertop kitchen appliance assembled by a manufacturer established in the EU. Its parts list has three lines: a motor subassembly from a tier-one supplier (copper windings, permanent magnets, steel laminations), a control board from a contract electronics maker, and an injection-moulded plastic housing. It is sold through EU retailers and the maker’s own web shop, and shipped from EU warehouses to customers outside the EU.

 

All three channels are in scope, because retail and the web shop count as making available and the shipments abroad are exports.[1]

 

Tier one is the motor maker, tier two the magnet and wire suppliers, and tier three the metal refiners. In this example, the team found two raw-material inputs in the motor chain that matched database entries, so those came first. The control board came second, because it has many components and they are hard to trace. The housing resin had no match, so it stayed on supplier declarations, to be revisited when the database is updated.

 

The motor is a replaceable part, so lot-level traceability on it means a decision can hit one part instead of the whole appliance.[1] To apply this to your own product, swap in your parts list, your channels and your highest-risk inputs.

Frequently asked questions

When does the EU Forced Labour Regulation apply?

It applies from December 14, 2027. Regulation (EU) 2024/3015 was signed on November 27, 2024, and has been in force since December 13, 2024.

Does the EU forced labour ban apply to SMEs?

Yes. There is no size threshold, and size affects only how authorities prioritise investigations and the time limits a decision sets.[1]

Do manufacturers have to register, file or certify anything under the EU Forced Labour Regulation?

No. There is no audit or reporting duty: you answer information requests and comply with decisions.[1]

Does the EU Forced Labour Regulation cover products made in the EU and exported?

Yes. Exporting products made with forced labour is prohibited, including products made in the EU.[1]

If an input appears in the EU forced labour database, is the product banned?

No. Only an Article 20 decision orders a specific product off the market, although the Article 3 prohibition applies whether or not one is taken. A database match raises that input’s priority for your due diligence.

Who investigates forced labour at a supplier outside the EU?

The European Commission does, as lead competent authority,[1] while national competent authorities investigate forced labour on their own territory.[1]

Notes and sources

 

  1. Regulation (EU) 2024/3015, OJ L, December 12, 2024, particularly Articles 1–3, 8, 11, 14, 15, 17, 18(4), 20, 21, 22(1)(b), 25, 27(1), 28–30, 37 and 38; recital 47.
  2. Commission Notice C/2026/4637, Guidelines on the application of Regulation (EU) 2024/3015, OJ C, September 3, 2026, particularly section 1; section 4.2; section 3.4; section 4.1; section 3.1.

 

Additional sources:

 

 

This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today