Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

Trade compliance for manufacturers: the tariff, export and customs rules to track

Trade compliance for manufacturers, explained: the US import, export control and customs rules, which agency owns each, and how to track changes by product.
A checklist card titled Product Trade Data listing six checked fields, including HTS subheading, ECCN or EAR99 and country of origin, on soft indigo bands.
November 17, 2026

Marc HaddadMarc HaddadForward Deployed Regulatory Engineer

 

Trade compliance for manufacturers means following the US rules for goods that cross a border: how each product is classified, valued and documented, what duty it owes, which approvals it needs at entry and who may receive it abroad. U.S. Customs and Border Protection, the Commerce Department and the Treasury Department enforce most of it.

 

Key points

 

  • Trade compliance has three strands: import duties and tariffs, export controls and sanctions, and customs entry and enforcement.
  • Everything rests on three facts about each product: its tariff classification, its customs value and its country of origin.
  • The importer of record must use reasonable care even when a customs broker files the entry.
  • A product’s export control status can’t be read off its import tariff code.
  • Rules change every few weeks, so the asset worth building is product data that matches a new rule to specific part numbers.

What is trade compliance for a manufacturer?

 

Trade compliance is the set of legal duties that attach to a product, and to the company moving it, when it is imported or exported. For a manufacturer, that means bringing in components and finished goods at the right duty, declaring them accurately, and sending products, software or technical data abroad only where the law allows.

 

The duties sit with named roles. The importer of record makes entry with U.S. Customs and Border Protection (CBP), declares each item’s value, tariff classification and rate of duty, and must do so “using reasonable care.”[1] On exports, the US principal party in interest (USPPI) is the US party that receives the main benefit of the sale, usually the manufacturer selling to a foreign buyer, and it must give accurate information to whoever files the export record.[2]

 

In practice, the work lands on whoever touches shipments first: logistics, purchasing, or a product compliance lead who has just been told it’s theirs. If your parts include steel or aluminium, CBAM for manufacturers covers that rule.

Which agencies and rules apply to imports and exports?

 

Three strands cover most of what a manufacturer meets, each with its own agencies and rules. The table shows who owns each strand and what it decides for your products.

 

Strand Agency Main rules What it decides for your products
Import duties and tariffs U.S. International Trade Commission (USITC) publishes the tariff schedule; CBP assesses and collects duty Harmonized Tariff Schedule of the United States (HTSUS); customs laws in Title 19 of the US Code The duty rate for each product and origin, including additional duties in chapter 99 of the schedule
Export controls and sanctions Commerce Department’s Bureau of Industry and Security (BIS); Treasury Department’s Office of Foreign Assets Control (OFAC) Export Administration Regulations (EAR), 15 CFR parts 730 to 774; OFAC sanctions programs and lists Whether a product, software or technology needs a license for a destination, end use or end user, and which parties you may not deal with
Customs entry and enforcement CBP, with partner agencies at entry; Census Bureau for export filing CBP regulations in 19 CFR; Foreign Trade Regulations, 15 CFR part 30 What you declare on each entry and export, what records you keep, and what errors cost

Why do classification, value and origin decide everything else?

 

They are the inputs every other trade rule is written against. A duty rate attaches to a classification and an origin, an additional duty attaches to a list of classifications from named countries, and other agencies’ entry requirements often follow the same codes, so an error in any of the three carries into every answer built on it.

 

Classification: each imported product takes a heading and subheading in the HTSUS, chosen under the schedule’s General Rules of Interpretation. The schedule moves often, and the USITC released Revision 23 of the 2026 edition on November 10, 2026.

 

Value: CBP appraises most goods at transaction value, the price paid or payable, and uses other methods only in a set order when that one can’t be used.[3] The invoice price is not always the full value, because the value of an assist, such as molds or tooling you supply free to an overseas producer, is added to it.[4]

 

Origin: origin decides which rates and additional duties apply. Products of China covered by one chapter 99 heading, for example, owe “the duty provided in the applicable subheading plus 25%.”[5] Section 232 and Section 301 tariffs, and how to determine origin, each have their own article.

 

Errors cost money even when no duty is lost. Entering goods through a material false statement or omission is a violation if it comes from fraud, gross negligence or negligence, and the negligence penalty can reach the lesser of the goods’ domestic value or twice the duty lost, or 20% of dutiable value where duty was unaffected.[6]

 

Exports need their own codes. The export filing rules accept a Schedule B number or an HTS code.[2] Export control status is a separate classification: an item subject to the EAR either matches an Export Control Classification Number (ECCN), a five-character entry on the Commerce Control List, or is designated EAR99 if it isn’t listed.[7, 8]

 

EAR99 does not mean license-free. The EAR reaches US-origin items wherever they are and some foreign-made items with controlled US content,[7] BIS’s Entity List sets license requirements for named foreign parties,[9] and OFAC prohibits US persons from dealing with Specially Designated Nationals and requires their property to be blocked.[10]

Who is responsible when a customs broker files your entries?

 

You are, if you are the importer of record. The law lets the importer of record file through an agent authorized in writing, but the reasonable care duty is the importer of record’s.[1] Duty owed is a personal debt of the importer, and paying a broker does not relieve you if the broker doesn’t pay CBP.[11] Entry records must be kept for five years from the date of entry.[12]

 

Suppliers and brokers don’t remove the need to check. A supplier’s code on an invoice is the supplier’s view, often of another country’s schedule, and a broker classifies from the description you give, so you need to review what was filed in your name.

 

Exports work the same way. When a forwarder files Electronic Export Information (EEI) in the Automated Export System (AES), the USPPI still has to provide accurate information and a written authorization.[2] Filing is required for most shipments where one classification code is worth more than $2,500, and for any export that needs a license, whatever its value.[2] The part number, description, origin and value behind your import entries are also the starting point for export classification and screening.

How do product approvals affect trade compliance at entry?

 

Other federal agencies set their own requirements for goods entering under their jurisdiction, so a product can stall at the border over a missing approval or document even when its duty is right. Which agencies matter depends on the product:

 

  • All physical products: check whether any partner agency regulates the product category before the first shipment, not after a hold.
  • Electrical and electronic products, radio included: the Federal Communications Commission (FCC) sets the conditions under which radio frequency devices may be imported.[13]
  • Children’s products and toys: the Consumer Product Safety Commission (CPSC).
  • Vehicles and vehicle equipment: the National Highway Traffic Safety Administration (NHTSA).
  • Products containing regulated chemicals: the Environmental Protection Agency (EPA).

 

Why goods get held, and how to prevent it, is covered in a separate article.

Why do trade rules change so often?

 

Most changes come from executive actions, agency rules and list updates rather than new legislation, and each source moves on its own schedule.

 

  • Tariff schedule: the USITC released 23 revisions of the 2026 HTSUS by November 10, 2026.
  • Export controls: BIS adds, removes and modifies Entity List entries on decisions of its End-User Review Committee.[9]
  • Sanctions: OFAC adds parties to its lists as programs change.
  • Customs: CBP publishes messages on new duties and system changes through its Cargo Systems Messaging Service (CSMS).

 

The person who owns compliance is rarely the first to feel it. The broker sees a new duty line on the next entry, finance sees duty spend jump, sales sees an order stopped by a screening hit, and engineering hears last, when a part has to be resourced.

How do you track trade rule changes for your products?

 

Put trade data into your product records, watch a short list of official sources, and match each change to products by code, origin and party.

 

  1. Inventory your products: for each part number you import or export, record the HTS subheading, Schedule B number, ECCN or EAR99, country of origin, supplier and producer, value inputs including assists, and the partner agencies involved.
  2. Map your parties: list customers, distributors, contract manufacturers and end uses, and screen them against the Consolidated Screening List.
  3. Watch the official sources: the USITC’s HTS releases, CBP’s CSMS messages, the Federal Register, BIS’s EAR and Entity List updates, and OFAC’s recent actions.
  4. Match each change to products: a new tariff heading maps to subheadings and origins, an Entity List entry maps to customers, and a partner agency rule maps to product categories.
  5. Record the decision: note who reviewed the change, what it meant for each product and what you changed, and keep it with your entry records.

 

Step 4 is where teams lose time, because the codes live in a broker’s system and the parts live in an engineering bill of materials. Daptic tracks regulatory and trade changes across jurisdictions, flags the ones that affect your products and works out which requirements apply to each product in each market, so the match starts from your product list instead of the headline.

Example: applying this to an assembled electronic product

 

Here is how one sourcing decision touches all three strands for a composite manufacturer. It imports a networked industrial controller with a built-in radio from a contract manufacturer abroad, sells it in the US and exports some units to distributors. To escape an additional duty on that origin, it moves final assembly to a contract manufacturer in another country and ships its own test fixtures and assembly drawings there.

 

  • Duty: whether the additional duty still applies depends on the origin of the new units, which needs its own analysis; the assembly country does not decide it automatically.
  • Value: the free test fixtures are an assist, so their value is added to the declared value of the controllers.[4]
  • Export status: sending the drawings abroad is an export of technology,[14] so they need an ECCN or EAR99 determination, and the new manufacturer needs screening before the first file goes out.
  • Export reach: foreign-made controllers built with controlled US-origin parts above the de minimis level stay subject to the EAR when distributors resell them.[7]
  • Entry paperwork: the broker needs updated supplier, origin and classification instructions, and the radio keeps the FCC import conditions in play.[13]

 

None of this showed up in the tariff headline that started the move. All of it showed up in a product record that held the codes, origin, value inputs and parties.

What should a manufacturer set up first?

 

Start with roles and data, then the strand that carries the most risk for your products.

 

  1. Name the importer of record and USPPI for every flow, and write down what brokers and forwarders do in your name.
  2. Build the product inventory for your highest-value imports, then confirm classification and valuation using the articles on HTS classification and customs valuation.
  3. Classify for export control and set up party screening, with the articles on ECCN classification and sanctions screening.
  4. Map partner agency requirements by product category, with the article on border holds.
  5. Review changes weekly against the inventory, using the articles on Section 232, Section 301 and origin for those programs.

Frequently asked questions

What is trade compliance for a manufacturer?

It is following the US rules for goods that cross a border: classification, valuation, origin, entry documentation, duties, export licensing and sanctions. CBP, BIS and OFAC enforce most of them.

Is the importer of record responsible if the customs broker makes a mistake?

Yes. The importer of record must use reasonable care whether it files itself or through a broker, and the duty owed is its personal debt.

Is an HTS code the same as an ECCN?

No. The HTS code sets import duty, while the ECCN sets export control status under the EAR, and one can’t be derived from the other.

Do export controls apply to ordinary commercial products?

Yes. Items subject to the EAR but not on the Commerce Control List are EAR99, and they can still need a license for a party on the Entity List.

How often does the US tariff schedule change?

Often. The USITC released 23 revisions of the 2026 schedule by November 10, 2026.

Notes and sources

 

  1. 19 U.S.C. 1484, particularly § 1484(a)(1).
  2. 15 CFR 30.2, particularly § 30.3(b)(2); § 30.37(a); § 30.2(a)(1)(iv).
  3. 19 CFR 152.101, particularly § 152.101(b).
  4. 19 CFR 152.103, particularly § 152.103(b)(1)(iii).
  5. Harmonized Tariff Schedule of the United States, heading 9903.88.01.
  6. 19 U.S.C. 1592, particularly § 1592(a).
  7. 15 CFR 734.3, particularly § 734.3(a).
  8. 15 CFR 738.2, particularly § 738.2.
  9. 15 CFR 744.11 and Supplement No. 4 to part 744, particularly § 744.11.
  10. OFAC, Sanctions FAQs 18 and 56
  11. 19 CFR 141.1, particularly § 141.1(b)(1).
  12. 19 CFR 163.4, particularly § 163.4(a).
  13. 47 CFR 2.1201, particularly § 2.1201.
  14. 15 CFR 734.13, particularly § 734.13(a)(1).

 

Additional sources:

 

 

This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today