CBAM for manufacturers importing steel and aluminium parts

Marc HaddadForward Deployed Regulatory Engineer
The EU Carbon Border Adjustment Mechanism (CBAM) puts a carbon price on certain imports of steel, aluminium and goods from four other sectors, and the importer pays it, not the foreign supplier. Since January 1, 2026, an importer bringing in more than 50 tonnes a year of covered goods must be an authorised CBAM declarant, file an annual declaration and surrender certificates.
Key points
- Who pays: CBAM is owed by the importer, not the foreign supplier.
- What decides scope: the customs code, not the material. Steel bolts and aluminium extrusions are in, but a gearbox full of steel or an aluminium-bodied appliance is out, for now.
- The 50-tonne exemption: it counts per importer per calendar year, across all CBAM goods, and if you go over it, everything you imported that year is liable.
- When you pay: in 2027, for goods imported in 2026. Certificates go on sale on February 1, 2027, and the first declaration and surrender are due on September 30, 2027.
What is CBAM?
CBAM is the EU’s charge on the carbon emitted in making certain imported goods. Regulation (EU) 2023/956, adopted on May 10, 2023, set it up to charge those imports the same carbon price an EU producer pays.
EU steel and aluminium producers pay for their emissions under the EU Emissions Trading System (ETS), the EU carbon market, while a producer outside the EU may pay nothing. Without a correction, production could move abroad and come back as imports, a risk called “carbon leakage.”
CBAM is phased in as EU producers lose their free ETS allowances, which reach zero in 2034. It covers six sectors: iron and steel, aluminium, cement, fertilisers, hydrogen and electricity.[1] This article covers the first two, because that is where most manufacturers meet it.
Regulation (EU) 2025/2083, adopted on October 8, 2025, amended the rules to exempt small importers and push back the payment timetable. The amendment entered into force on October 20, 2025, and everything here reflects the amended text. CBAM is one piece of the wider EU sustainability rules for products that manufacturers selling into the EU have to track.
Which steel and aluminium imports does CBAM cover?
CBAM covers goods by customs code, not by what they are made of. If the code on your customs declaration is listed in Annex I, the goods are in scope, and if it is not, they are out, even when they are pure metal.
The code that counts is the eight-digit Combined Nomenclature (CN) code, the EU’s product code for customs. For iron and steel, Annex I covers:
- Chapter 72: semi-finished and flat products, bars and wire (minus some ferro-alloys)
- 7301 and 7302: sheet piling and railway material
- 7303 to 7307: tubes, pipes and fittings
- 7308: structures
- 7309 to 7311: tanks and containers
- 7318: screws, bolts, nuts and washers
- 7326: “other articles of iron or steel”
For aluminium, it covers unwrought aluminium (7601) and headings 7603 to 7614 and 7616: powders, profiles, wire, sheet, foil, tubes, structures, containers, stranded wire and “other articles of aluminium.”
Steel chains (7315), springs (7320) and kitchenware (7323) are not covered, and neither is anything classified in Chapters 84 to 95.
The table below shows where common steel and aluminium imports fall today and what to check for each.
| What you import | In scope today? | What to check |
|---|---|---|
| Steel coil, sheet, bar, wire (Chapter 72) | Yes | Grade and CN code; the mill’s emissions data |
| Steel bolts, nuts, screws, washers (7318) | Yes | Shipped loose, or fitted inside an assembly |
| Stamped or welded steel parts (7308, 7326) | Usually | Whether the part is identifiable as a part of a machine or vehicle |
| Aluminium profiles, sheet, foil (7604 to 7607) | Yes | Alloy, processing, and the smelter behind the extruder |
| Aluminium enclosures, heat sinks, castings | Depends | 7616 is in. A part dedicated to an electrical apparatus may classify in Chapter 85 |
| Insulated cable (8544) | No | Bare stranded aluminium conductor (7614) is in |
| Machines, motors, vehicles and their parts, appliances, toys, furniture | No | Whether the downstream proposal brings them in (see below) |
The law does not change by product category, but the bill of materials does. Electrical and electronic makers tend to meet CBAM through enclosures, busbar stock, heat sinks and bare conductor, while machinery makers meet it through frames, structures and fasteners. Toy and children’s product makers importing finished goods are rarely caught, unless they also import tube or sheet for their own production.
Loose parts versus assembled goods
A good is classified as it crosses the border. A box of loose bolts is generally 7318 and in scope, but the same bolts fitted inside an imported gearbox are part of the gearbox and out.
When processing changes the code
An aluminium profile that is cut, drilled and anodised for one product may stay in 7604, move to 7610 or 7616 (both in scope), or become an identifiable part of an appliance (out). Where the answer drives real cost, get a binding tariff information decision (a formal classification ruling) from customs rather than relying on the supplier’s invoice code. The list of codes can also move while the downstream proposal is negotiated, and Daptic tracks changes to CBAM scope and flags which of your imported parts and materials they reach.
Does the 50-tonne CBAM threshold exempt you?
Only if your combined imports of CBAM goods stay within 50 tonnes in the calendar year. It is a single threshold per importer, not per shipment and not per sector.
The 50 tonnes is net mass, added up across all CBAM goods except electricity and hydrogen.[1] If you go over it, the obligations apply to everything you imported that year, from the first kilogram.[1]
EU lawmakers set the threshold to exempt most importers while keeping at least 99% of embedded emissions in scope.[2]
What is a CBAM authorised declarant?
An authorised CBAM declarant is the company allowed to import covered goods, and it is the one that owes CBAM.[1] Only an authorised declarant may import CBAM goods.
The importer is whoever lodges the customs declaration in its own name, so under direct representation, where your broker files in your name, the obligation stays with you. An indirect customs representative (a broker that files in its own name on your behalf) can hold the authorisation for you, and it must do so if the importer is not established in the EU.[1]
How do you apply for authorisation?
Applications go through the CBAM Registry to the authority of the Member State where you are established.[1] Importers that applied by March 31, 2026, could keep importing while their application was pending, but that window has closed.[1] Importing without authorisation carries penalties of three to five times the standard penalty.[1]
What if your supplier delivers duty paid?
If your supplier delivers duty paid, meaning its side handles the import, its side is the importer and its indirect customs representative holds the CBAM obligation. You don’t file, but the cost still reaches you through the price, and you lose sight of the emissions data behind it.
When does the CBAM definitive period start, and when do you pay?
On January 1, 2026, the definitive period began, so goods imported since then are liable. Payment comes in 2027, when certificates go on sale on February 1. The first annual declaration and surrender of certificates (handing them over to cover your emissions) are due on September 30, 2027.
From October 1, 2023, to December 31, 2025, a transitional period required quarterly reports but no payment. The table below shows the milestones from the transitional period to the first payment.
| Date | Milestone | Status |
|---|---|---|
| October 1, 2023, to December 31, 2025 | Transitional period: quarterly reports, no payment | Ended |
| January 1, 2026 | Definitive period began | Adopted, in application |
| March 31, 2026 | Last date to apply and keep importing while pending | Adopted, passed |
| February 1, 2027 | Certificate sales open on the common central platform (Article 20) | Adopted |
| March 31, 2027 | First quarterly holding check: at least 50% of embedded emissions imported since January 1, 2027 (Article 22(2)) | Adopted |
| September 30, 2027 | First annual declaration and surrender, for 2026 imports (Articles 6(1), 22(1)) | Adopted |
For 2026 imports, certificates are priced on quarterly averages of the EU ETS price, and from 2027 onward they use weekly averages.[1]
How are embedded emissions calculated for steel and aluminium?
You use either verified data from the plant that made the goods or the Commission’s default values. Defaults are deliberately pessimistic, so supplier data is your only way below them.
Embedded emissions are the greenhouse gases released in making the goods and their precursors (the materials that went into them). For an aluminium extrusion, most of them come from smelting the unwrought aluminium, not from extruding it. Indirect emissions are those from the electricity used, but for the iron, steel and aluminium goods listed in Annex II, only direct emissions count.[1]
Actual values come from the producing installation, are calculated under Annex IV and must be checked by an accredited verifier.[1, 3] Default values are set for each country of origin and need no verification. They are average emission intensities set in Implementing Regulation (EU) 2025/2621, as corrected by Implementing Regulation (EU) 2026/1740, and “increased by a proportionately designed mark-up.”[1]
How many CBAM certificates do you need?
Start from your embedded emissions and deduct two adjustments. The first is for the free ETS allocation still given to EU producers,[1] and the second is for any carbon price effectively paid in the country of origin.[1]
The free allocation adjustment shrinks every year, and each step raises the net CBAM cost per tonne. The adjustment factor falls from 97.5% for 2026 to 95% (2027), 90% (2028), 77.5% (2029), 51.5% (2030), 39% (2031), 26.5% (2032) and 14% (2033), and stops applying from 2034.[4]
What do manufacturers have to do now?
Work out whether you are over the threshold, get emissions data from suppliers, and make sure someone holds the authorisation before the 2027 payments.
- Map imports by CN code: pull your 2026 customs data, filter it to the Annex I codes and add up the net mass, including what your brokers declared on your behalf.
- Ask suppliers for emissions data: request the producing installation, the production route, the origin of the precursors and a verifier’s statement. Ask early, because defaults apply when the data is missing.
- Decide on authorisation: if you are near 50 tonnes, apply now or route imports through an indirect customs representative who holds the authorisation.
- Budget for certificates: multiply your embedded emissions by the EU ETS price, less the free allocation adjustment, and from 2027 keep cash for the quarterly 50% holding.
Will CBAM cover machinery, vehicle and appliance parts?
Not yet. The Commission has proposed extending CBAM to steel- and aluminium-intensive downstream goods, but the proposal has not been adopted.
On December 17, 2025, the Commission published the proposal, COM(2025) 989 (procedure 2025/0419(COD)), which includes anti-circumvention measures. Its recital 53 proposes applying the extension from January 1, 2028.
On June 12, 2026, the Council agreed its general approach, and on September 15, 2026, Parliament voted its amendments and referred the file back for negotiations.
At the time of review, the proposal was in interinstitutional negotiations (talks between Parliament, Council and Commission). If it passes, parts that are out of scope today, including some machinery, vehicle and appliance components, could come in.
The detail also moves outside the main regulation. Default values, benchmarks and the registry rules sit in Commission implementing acts that are corrected and revised, and the default value act was last corrected in July 2026.
Example: CBAM for an enclosure and racking maker
Here is how the steps above work for one composite company, an EU maker of industrial enclosures and racking. In 2026, it imported:
- 140 tonnes of aluminium profiles (7604) from one extruder
- 12 tonnes of zinc-plated steel bolts and nuts (7318) through a trading house
- steel cabinet hinges (8302)
- finished cooling fans with steel housings (8414)
Codes: the profiles and bolts are on the Annex I list, but the hinges and fans are not, so they are out.
Threshold: the profiles and bolts add up to 152 tonnes, so all 152 tonnes are liable, including the bolts that would have been exempt on their own.
Emissions data: the extruder named its smelter and supplied verified installation data, so the profiles use actual values. The trading house could not name the mill behind the bolts, so they use the default value for the country of origin.
Authorisation and payment: the company applied for authorisation in February 2026 and kept importing while its application was pending. It plans to buy certificates for 2026 from February 1, 2027, and surrender them by September 30, 2027.
To apply this to your own business, work through your customs data in the same order: codes, combined tonnage, supplier data, then who holds the authorisation.
Frequently asked questions
Does the foreign supplier pay CBAM?
No. The importer owes it, as the authorised CBAM declarant.[1] The supplier’s side carries it only when it is the importer, for example when it delivers duty paid.
Is everything made of steel or aluminium covered by CBAM?
No. Scope is set by the CN codes in Annex I, and finished products in Chapters 84 to 95 are out today.
Is the CBAM 50-tonne threshold per shipment?
No. It is per importer per calendar year, across all CBAM goods except electricity and hydrogen, and if you go over it, everything you imported that year is liable from the first kilogram.
Are 2026 imports free because CBAM certificates aren’t sold until 2027?
No. Goods imported in 2026 are liable, and the bill is settled in 2027. Certificates go on sale on February 1, 2027, and the first declaration and surrender are due on September 30, 2027.
Can I import CBAM goods while my authorisation application is pending?
Only if you applied by March 31, 2026, and that window has closed. Importing without authorisation carries penalties of three to five times the standard penalty.
Notes and sources
- Regulation (EU) 2023/956, consolidated text of October 20, 2025, particularly Articles 2a, 4, 5, 7(1), 8, 9, 17, 21, 22, 26(2) and 31; Annex I; Annex VII, point 1; Annex IV, point 4.1.
- Regulation (EU) 2025/2083, particularly recital 5.
- Delegated Regulation (EU) 2025/2551.
- Directive (EU) 2023/959 (EU ETS amendment)
Additional sources:
- Implementing Regulation (EU) 2025/2621 (default values) and Implementing Regulation (EU) 2026/1740
- COM(2025) 989, downstream extension proposal
- Legislative Observatory, 2025/0419(COD))
- Council press release, June 12, 2026
- European Commission, CBAM legislation and guidance
- Last reviewed: November 9, 2026.
This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.



