Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

Battery passport: which batteries need one and what goes in it

What the EU battery passport is, which batteries need one from February 18, 2027, who creates it, what data it holds and what manufacturers should prepare now.
A Batteries card in a slate app interface listing an LMT battery and an industrial battery over 2 kWh, both tagged as needing a passport from February 18, 2027.
November 12, 2026

Michelle NgMichelle NgSenior Regulatory Analyst

 

The EU battery passport is an electronic record that every electric vehicle battery, light means of transport battery and industrial battery over 2 kWh placed on the EU market from February 18, 2027, must have under the Batteries Regulation (EU) 2023/1542. The business that places the finished battery on the market creates and maintains it, and a QR code on the battery opens it.

 

Key points

 

  • Three kinds of battery need one: Electric vehicle batteries, batteries for light vehicles such as e-bikes and e-scooters, and industrial batteries above 2 kWh need a passport if placed on the EU market from February 18, 2027.
  • The passport follows the finished battery, not the end product: Whoever first places the finished battery on the EU market is responsible, whether that is a battery maker, an importer or the maker of the product the battery powers.
  • Not everyone sees everything: Some data is public, some is only for repairers, recyclers and others with a legitimate interest, and test reports are only for authorities.
  • Most of the data starts with suppliers: Chemistry, performance values, recycled content and sourcing information come from cell and material suppliers, so collecting them takes months.
  • The date stands: As of November 10, 2026, the February 18, 2027 start date had not changed, though the rules on who may see restricted data were still a draft.

What is a battery passport?

 

A battery passport is a digital record for one battery, holding information about its model and about that individual battery, including data generated while it is in use.[1] Anyone can reach it by scanning the QR code on the battery, though what they see depends on who they are. The passport is one requirement among many in the EU Battery Regulation.

 

It exists so that the information needed to repair, reuse, repurpose and recycle a battery travels with it for its whole life, instead of staying in the original maker’s files. That is why the passport changes hands when the battery changes status, and why it only ends once the battery has been recycled.[1]

 

The passport is not a certificate or an approval, and nobody issues it to the manufacturer. It is a data record that the responsible business hosts itself or through a service provider of its choosing.[2] It also sits alongside the CE marking, the labels and the EU declaration of conformity (the manufacturer’s signed statement that the battery meets the law) rather than replacing them.

Which batteries need a battery passport?

 

Three categories need a passport if they are placed on the market or put into service in the EU from February 18, 2027: light means of transport (LMT) batteries, industrial batteries with a capacity above 2 kWh, and electric vehicle batteries.[1] Batteries already on the market before that date don’t need one.

 

The categories are defined in the regulation, and the table below shows how they map to everyday products.[1]

 

Battery category What the regulation means Typical products Passport needed
LMT battery Sealed, 25 kg or less, powering wheeled vehicles driven by a motor alone or with pedaling, including light L-category vehicles E-bikes, e-scooters, e-mopeds Yes
Electric vehicle battery Traction battery for cars, vans, buses, trucks and trailers, or for L-category vehicles when the battery weighs over 25 kg Electric and hybrid cars, heavier electric motorcycles Yes
Industrial battery over 2 kWh Designed for industrial uses, or any other battery over 5 kg that is not an electric vehicle, LMT or starter battery; includes stationary energy storage Home and grid storage, forklifts, construction and farm machinery, backup power Yes
Industrial battery of 2 kWh or less Same definition, smaller capacity Small backup units, some equipment packs No
Portable and starter batteries Small sealed batteries in consumer products, and starting, lighting and ignition (SLI) batteries Phones, laptops, toys, most power tools, car starter batteries No

 

How this plays out depends on the product:

 

  • Vehicles and light vehicles: Traction batteries in cars, vans, e-bikes and e-scooters all need a passport, whatever their size.
  • Machinery and energy storage: Batteries in forklifts, construction equipment and stationary storage are industrial batteries, so capacity decides; above 2 kWh, they need a passport.
  • Electrical and electronic products, radio equipment and toys: These mostly use portable batteries, which need no passport. From February 18, 2027, though, every battery carries a QR code, which for these batteries links to other information such as the declaration of conformity.[1]

 

Where a product holds several packs, the Commission’s view is that each complete, independently functioning pack is a separate battery, so two 1.5 kWh packs may not add up to one battery over the threshold.[2] This is decided case by case.

Who has to create the battery passport?

 

The economic operator (a business in the supply chain) that places the battery on the EU market, meaning first makes it available there, must make sure the passport information is accurate, complete and up to date.[1] It can authorize another business in writing to act for it, but the responsibility stays with it.

 

According to the Commission’s guidance, the obligation attaches to the finished battery, not to cells or modules, and to the battery rather than the product it goes into.[2] In practice, that points to one of these:

 

  • An EU battery maker: It is responsible for finished batteries it supplies to product makers.
  • An importer: A business importing a finished battery from outside the EU, including one already fitted inside a product such as an e-bike, is normally the one placing it on the market.
  • A product maker that finishes the battery: A vehicle maker that completes a battery, for example by adding the battery management system, becomes responsible.

 

A non-EU maker can be authorized to manage the passport, but that does not make it the importer.[2] And a business that sells a battery under its own name or trademark, or modifies it in a way that can affect compliance, is treated as its manufacturer.[1]

 

A product maker that buys finished batteries already placed on the EU market doesn’t create the passport, but it still needs one to exist. Before passing a battery on, importers and distributors must check that it is marked as the regulation requires, which from February 18, 2027 includes the QR code that leads to the passport.[1] A business selling a product with such a battery inside may count as a distributor of that battery.

 

Responsibility also moves over the battery’s life. When a battery is prepared for reuse, repurposed or remanufactured, the business that places it back on the market creates a new passport linked to the original, and when it becomes waste, responsibility passes to the producer, its producer responsibility organization or a waste operator.[1]

What information goes in a battery passport?

 

The passport holds four groups of information, each with its own audience.[1] The table below shows what each group contains and who can see it.

 

Group What it holds Who can see it
Model information (Annex XIII, point 1) General battery information and labeling, material composition including hazardous substances and critical raw materials, carbon footprint, responsible sourcing, recycled and renewable content, capacity, voltage, power, expected lifetime, temperature range, warranty period, efficiency, internal resistance, declaration of conformity, waste information The public
Model information (Annex XIII, point 2) Detailed composition of cathode, anode and electrolyte, part numbers and spare-part sources, dismantling information, safety measures Persons with a legitimate interest, notified bodies, market surveillance authorities and the Commission
Model information (Annex XIII, point 3) Test reports proving compliance Notified bodies, market surveillance authorities and the Commission
Individual battery (Annex XIII, point 4) Performance and durability values, state of health, status (original, repurposed, reused, remanufactured or waste), and usage data such as charge cycles, accidents and operating conditions Persons with a legitimate interest

 

A notified body is an independent organization designated to assess conformity, and market surveillance authorities are the national regulators that check products on the market. Persons with a legitimate interest include repairers, remanufacturers, second-life operators and recyclers, and for an individual battery, its buyer; an implementing act is meant to settle exactly who qualifies.[1]

 

Not every public field applies on day one. Some depend on obligations with their own start dates, such as battery due diligence, which now applies from August 18, 2027.[1, 2] The Commission’s data-point guidance lists each field and its format, and it was last updated on October 19, 2026.[3]

How does the QR code link to the battery passport?

 

The QR code on the battery leads to a unique identifier that the business placing the battery on the market assigns to that battery, and the identifier leads to the passport.[1] Both must follow ISO/IEC 15459 parts 1 to 6, an international standard for unique identification, or an equivalent standard; the standard is a technical specification, and the regulation is what makes it mandatory here.

 

The same business must upload the identifier to the EU digital product passport registry, which the Commission had to set up by July 19, 2026, and which it says launched on July 20, 2026.[1, 2, 4] The data itself must be machine-readable, in an open and interoperable format that can move without vendor lock-in, and the passport must stay available even if the responsible business closes or leaves the EU.[1]

How does the battery passport relate to the digital product passport?

 

The battery passport is a digital product passport with its own legal basis: the Batteries Regulation sets its scope, content and date. The Ecodesign for Sustainable Products Regulation (EU) 2024/1781 (ESPR) sets the general framework, under which a product group needs a passport only once a delegated act (a Commission act adding detailed rules) requires one.[4]

 

The two share infrastructure. The battery passport must be fully interoperable with passports under the ESPR, battery identifiers go into the same registry, and the Commission describes the passports as linkable through their identifiers.[1, 2] If a future ESPR act requires a passport for a product with a passport battery inside, each would keep its own record.

Is the battery passport date changing?

 

As of November 10, 2026, no: the February 18, 2027 start date had not been changed, and no adopted act or Commission proposal moved it.

 

July 18, 2025: Regulation (EU) 2025/1561 postponed the battery due diligence obligations to August 18, 2027, and left the passport date alone.[1, 2]

 

December 10, 2025: The Commission proposed suspending a rule on appointing authorized representatives for battery producer responsibility until January 1, 2035. The proposal has not been adopted, and it does not mention the passport.[5, 6]

 

October 19, 2026: The regulation set August 18, 2026 as the deadline for the implementing act on who has a legitimate interest, but the Commission only published its draft on this date, for feedback until November 16, 2026, with adoption planned for the last quarter of 2026.[7, 8] The access rules, the data-point guidance and the registry details are all still being filled in, and Daptic tracks regulatory changes like these across jurisdictions and flags the ones that affect a company’s products, so a team can keep track of battery passport changes as each one lands.

What should manufacturers prepare now?

 

The work starts with suppliers, because most passport data originates upstream. A practical order:

 

  1. Classify each battery: Confirm its category and capacity, and whether each pack counts as a separate battery.
  2. Settle who places it on the market: Map every supply route, and note where the company imports, rebrands or finishes a battery itself.
  3. Map each field to its owner: Cell makers hold chemistry, cycle life and resistance data; material suppliers hold critical raw material, recycled content and sourcing data; engineering holds dismantling instructions and part numbers; quality holds test reports.
  4. Put the data in contracts: Where a supplier is responsible, require the passport and QR code before delivery; where the company is, require the supplier’s data in the format the guidance sets.
  5. Decide who hosts it: In-house or through a service provider authorized in writing, with a plan for keeping individual battery data current after sale.

 

This touches purchasing, engineering, quality and software teams as much as compliance. A supplier asked for carbon footprint or sourcing data a few weeks before launch may not have it in a usable form.

What does this look like for a battery-powered product?

 

As an example of applying this to a product, consider a company that builds electric cargo bikes in the EU. Its sealed battery packs weigh well under 25 kg and are assembled outside the EU by a contract manufacturer, using cells from another supplier, and they arrive finished, with the battery management system installed.

 

The packs are LMT batteries, so each one placed on the market from February 18, 2027 needs a passport. Because the company imports the finished packs itself, it is the business placing them on the EU market, and the passport is its responsibility even though it never makes a cell. It can authorize the pack maker or a service provider to build and host the passports, but the duty stays with it.

 

If it later bought packs from an EU distributor that imports them, the passport would become the importer’s job. The company’s task would shift to checking that each pack carries its QR code before the bikes ship.

 

Its data comes from several places: the cell supplier for chemistry, cycle life and much of the carbon footprint; the pack maker for dismantling information, part numbers and test reports; and the company itself for the identifier and registry upload. State of health and usage data change after sale, so it also needs a plan for keeping the individual battery’s record current.

Frequently asked questions

Does every battery need a battery passport?

No. Only LMT batteries, electric vehicle batteries and industrial batteries above 2 kWh need one, though from February 18, 2027 every battery carries a QR code.

When does the EU battery passport become mandatory?

From February 18, 2027, for batteries in those categories placed on the market or put into service in the EU from that date. As of November 10, 2026, that date had not changed.

Who is responsible for the battery passport?

Only the business that places the finished battery on the EU market, which may be a battery maker, an importer or a product maker that finishes the battery. It can delegate the work in writing but keeps the responsibility.

Do batteries already on the market need a battery passport?

No. The requirement covers batteries placed on the market or put into service from February 18, 2027, while a battery repurposed or remanufactured after that date gets a new passport linked to the original.

Is the battery passport the same as the digital product passport?

Not exactly. The battery passport comes from the Batteries Regulation with its own content and date, while other products need a digital product passport only once an ESPR delegated act requires one, and the two are designed to be interoperable.

Notes and sources

 

  1. Regulation (EU) 2023/1542 (Batteries Regulation), consolidated text as amended to August 13, 2026, and the original Official Journal text, particularly Articles 3(1), 13(6), 41(2)(b), 42(2)(b), 44, 77 and 78; Article 77(2) and Annex XIII.
  2. European Commission, EU Digital Product Passport FAQ for Batteries (1st edition, September 2026)
  3. European Commission, Digital Product Passport: Batteries, “Digital Batteries Passport: data point by category”, last updated October 19, 2026.
  4. Regulation (EU) 2024/1781 (Ecodesign for Sustainable Products Regulation), particularly Articles 9(1) and 13(1).
  5. COM(2025) 982, Commission proposal suspending authorized representative rules for batteries and packaging, particularly Article 1. Legislative proposal.
  6. procedure 2025/0395(COD) ongoing as of November 10, 2026.
  7. European Commission, Have your say: Batteries, access rights to certain parts of the battery passport
  8. not adopted as of November 10, 2026.

 

Additional sources:

 

 

This article reflects Michelle Ng’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today