EU Battery Regulation: what applies to products with batteries, and when

Michelle NgSenior Regulatory Analyst
The EU Battery Regulation, Regulation (EU) 2023/1542, sets the rules for every battery placed on the European Union (EU) market, including batteries built into other products. Its duties phase in between 2024 and 2028 and cover substance limits, CE marking, labels, removable batteries, battery passports, supply chain due diligence and producer registration.
Key points
- Batteries inside products are covered: A battery built into a phone, power tool, toy, appliance or e-bike falls under the regulation just as a battery sold on its own does.
- A compliant battery does not settle the product maker’s duties: The business that places a product with a built-in battery on the EU market has obligations of its own, starting with removability from February 18, 2027.
- Several duties already apply: Substance limits, CE marking, the separate collection symbol and producer registration in each EU country started in 2024 and 2025.
- February 18, 2027, is the next big date: QR codes on all batteries, user-replaceable portable batteries and the battery passport for larger batteries start then, and due diligence follows on August 18, 2027.
- Some rules may still change: Proposals from December 2025 would adjust removability and registration rules, but they have not been adopted, so the current text applies.
What is the EU Battery Regulation?
The EU Battery Regulation is one EU law covering batteries across their whole life, from the raw materials in them to their collection and recycling. Regulation (EU) 2023/1542 was adopted on July 12, 2023, entered into force on August 17, 2023, and has applied since February 18, 2024, with many duties starting on later dates.[1]
It replaced the Batteries Directive 2006/66/EC, which was repealed with effect from August 18, 2025, apart from a few provisions kept for a transition.[1] Because it is a regulation rather than a directive, it applies directly in every EU country (called a Member State) without national laws to bring it in, although each Member State still runs its own producer register, fees and collection.
The law exists because batteries now sit in a growing share of everyday products, and the materials in them are hard to source responsibly and costly to lose to landfill. It works through the same tools as other EU product law: technical requirements, conformity assessment (the checks that show a product meets the law), CE marking and market surveillance. It is one part of the wider EU sustainability rules for products.
Which batteries does the regulation cover?
The regulation covers every battery whatever its size, chemistry or use, including batteries incorporated into or added to other products.[1] It sorts them into five categories, and the category decides which duties apply.
The table shows the five categories as the regulation defines them, with typical examples.[1]
| Category | How the regulation defines it | Typical examples |
|---|---|---|
| Portable | Sealed, 5 kg or less, not designed for industrial use, and not an LMT, SLI or electric vehicle battery | Batteries in phones, laptops, power tools, toys and household appliances; AA and button cells |
| Light means of transport (LMT) | Sealed, 25 kg or less, designed to power the traction of light wheeled vehicles | E-bike and e-scooter batteries |
| Starting, lighting and ignition (SLI) | Designed to supply power for starting, lighting or ignition of vehicles | 12-volt car batteries |
| Industrial | Designed for industrial uses, or any other battery over 5 kg that is not LMT, SLI or electric vehicle | Forklift batteries, home and grid energy storage |
| Electric vehicle (EV) | Designed for traction in hybrid or electric vehicles of categories M, N or O, or of category L if over 25 kg | Car and van traction batteries |
Two consequences surprise newcomers. A large home energy storage battery counts as industrial even though a household buys it, and the battery passport does not reach portable batteries at all.
Who has to comply with the EU Battery Regulation?
Several businesses in one supply chain hold duties at the same time, and the company that makes a product is often not the one the regulation names for a given duty. The main roles are:
- Manufacturer: The business that makes a battery, or has it designed or made, and markets it under its own name. It carries out the conformity assessment, draws up the technical documentation and the EU declaration of conformity, and affixes the CE mark.[1]
- Importer: The EU business that places a battery from outside the EU on the market, including one inside an imported product. It checks the CE mark and paperwork and adds its own name and postal address.[1]
- Distributor: Anyone else who makes the battery available, who must check, among other things, that the producer is registered in that Member State.[1]
- Producer: A term from the waste chapter for the business that first supplies a battery in a given Member State, including batteries inside appliances and vehicles. The producer registers, reports and pays for collection and recycling in each country, and is often the brand owner or importer of the finished product rather than the battery maker.[1]
An importer or distributor that sells a battery under its own name, or modifies it or changes its purpose, takes on the manufacturer’s duties.[1] For example, a factory outside the EU may assemble packs from bought-in cells for a brand that sells finished products in Europe; the factory makes the battery, but the brand’s EU importer and the producer in each country carry duties the factory never sees.
What applies now, and what starts in 2027?
Substance limits, CE marking, the collection symbol and producer registration already apply, and the next group of duties starts on February 18, 2027. The table lists the main obligations for products with batteries and when each one starts.
| Obligation | Batteries covered | Start date | Provision | Status as of November 2026 |
|---|---|---|---|---|
| Mercury and cadmium limits | Mercury: all batteries; cadmium: portable batteries | February 18, 2024 | Article 6, Annex I | Applies |
| Lead limit (0.01% by weight) | Portable batteries; zinc-air button cells exempt until August 18, 2028 | August 18, 2024 | Article 6, Annex I | Applies |
| Conformity assessment, EU declaration of conformity and CE marking | All batteries | August 18, 2024 | Articles 17 to 20, 38 and 96 | Applies |
| Separate collection symbol | All batteries | August 18, 2025 | Article 13(4) | Applies |
| Producer registration and extended producer responsibility | Producers in each Member State | August 18, 2025 | Articles 55 to 57 and 96 | Applies |
| General information label | All batteries | August 18, 2026, or 18 months after the labelling implementing act enters into force, whichever is later | Article 13(1) to (3) and (10) | Start date not yet fixed; implementing act pending |
| QR code | All batteries | February 18, 2027 | Article 13(6) | Not yet applicable |
| User-removable and replaceable portable batteries | Products with built-in portable batteries | February 18, 2027 | Articles 11 and 96 | Not yet applicable |
| LMT batteries replaceable by an independent professional | Products with LMT batteries | February 18, 2027 | Article 11(5) | Not yet applicable; change proposed |
| Battery passport | LMT, industrial over 2 kWh and EV batteries | February 18, 2027 | Article 77 | Not yet applicable |
| Supply chain due diligence | Businesses placing batteries on the market with net turnover of €40 million or more | August 18, 2027 | Articles 47 and 48 | Not yet applicable; postponed from 2025 |
Each date applies to batteries placed on the market from that day, meaning first supplied in the EU. The general information label is the one date still moving, because it depends on a Commission implementing act setting the label’s format, which is still pending.[1] On December 22, 2025, the Commission notified a draft of that act to the World Trade Organization, and the record still showed EU replies to comments dated November 6, 2026.[2]
A regulation and a standard are different things. Harmonized standards are voluntary technical standards that give a presumption of conformity with the parts of the law they cover, and the first one referenced under this regulation, EN 18060:2025, was published on September 16, 2026, for electric vehicle batteries.[3]
What does a business that puts batteries in its products have to do?
A business that builds batteries into its products, or imports products containing them, has duties of its own even when every battery comes from a compliant supplier. Which ones apply depends on the battery category and on how the product reaches each EU market.
Removability: From February 18, 2027, any business placing on the market a product with a built-in portable battery must make sure the end user can remove and replace that battery at any time during the product’s life. It counts as readily removable if commercially available tools are enough, without heat or solvents, and proprietary tools are allowed only if supplied free.[1] Narrow exceptions exist, for example for appliances designed to be washed or used in water and where a permanent power connection is needed for safety reasons.
LMT batteries: From the same date, products with LMT batteries must let an independent professional remove and replace the battery, currently down to its individual cells.[1]
Instructions: The product must come with instructions and safety information on removing and replacing the battery, also kept permanently on a public website.[1]
Producer registration: Where the business is the producer in a Member State, it must register there before supplying batteries, including those inside its products, and meet extended producer responsibility through its own scheme or a producer responsibility organization (an organization that handles the obligations for its members).[1] A producer selling directly to end users in a country where it is not established must appoint an authorized representative for extended producer responsibility there.[1]
Checks on the battery: Where it imports the battery, alone or inside a product, it must verify the CE mark, declaration and documentation, and keep a copy of the declaration for 10 years.[1]
Due diligence: From August 18, 2027, a business that places batteries on the market must run a due diligence program on raw materials such as cobalt, lithium, nickel and natural graphite, unless its net turnover is below €40 million and it is not part of a larger group.[4]
One product often triggers several of these duties at once, alongside the separate EU laws on electrical waste and packaging, each with its own registration. Daptic tracks changes to rules like these across jurisdictions, flags the ones that touch a company’s products and works out which requirements apply to a given product in a given market.
What has been postponed or changed since adoption?
The due diligence start date moved by two years, the substance annex was rewritten for vehicle batteries, and two proposals that would change other duties are still under negotiation.
On July 30, 2025, Regulation (EU) 2025/1561 was published, moving the start of the due diligence duties from August 18, 2025, to August 18, 2027.[4]
On July 24, 2026, Regulation (EU) 2026/1738 on end-of-life vehicles was published. It replaced the regulation’s list of substance restrictions to take in the lead and cadmium rules for vehicle batteries, leaving the limits for portable batteries as they were.[1, 5]
On December 10, 2025, the Commission proposed COM(2025) 981, which would redefine the producer for cross-border sales, add a label for substances of very high concern and move the LMT replaceability rule from cells to modules. As of November 10, 2026, Parliament had not voted on it in plenary.[6–8]
Also on December 10, 2025, the Commission proposed COM(2025) 982, which would suspend the duty to appoint an authorized representative for extended producer responsibility until January 1, 2035. Parliament adopted its amendments on October 20, 2026, and the procedure was still open as of November 10, 2026.[8–10] Neither proposal has been adopted, so manufacturers must follow the current text.
Example: applying the regulation to a cordless appliance
Consider a composite case: a manufacturer outside the EU makes a cordless handheld appliance with a sealed lithium-ion pack well under 5 kg. It sells through an importer in one Member State and directly to consumers online in a second.
- Category: The pack is a portable battery, so no battery passport is needed, but the removability rule applies.
- The battery itself: The pack needs the CE mark, an EU declaration of conformity and the separate collection symbol, and packs placed on the market from February 18, 2027, also need a QR code. The importer checks this and adds its name and postal address.
- Producer registration: In the first country, the importer first supplies the batteries and is likely the producer that registers. In the second, the manufacturer sells at a distance, so it is the producer there and needs an authorized representative for extended producer responsibility unless the proposed suspension is adopted first.
- Removability: If the pack is glued in, units placed on the market from February 18, 2027, need a redesign, plus removal instructions published online.
- Due diligence: From August 18, 2027, whichever business places the packs on the EU market checks whether it crosses the €40 million threshold.
The appliance and its box also fall under the EU’s electrical waste and packaging rules.
Frequently asked questions
When does the EU Battery Regulation apply?
It has applied since February 18, 2024, but its duties start on different dates, from August 18, 2024, for CE marking to August 18, 2027, for due diligence. Removable portable batteries, QR codes and the battery passport start on February 18, 2027.
Does the EU Battery Regulation apply to products with built-in batteries?
Yes. It covers batteries incorporated into other products, and the business placing such a product on the market has its own removability and information duties and is often the producer that registers.
Do batteries need CE marking in the EU?
Yes. Since August 18, 2024, batteries must go through conformity assessment and carry the CE mark before they are placed on the EU market.
Which batteries need a battery passport?
Only LMT batteries, industrial batteries over 2 kWh and electric vehicle batteries, from February 18, 2027. Portable batteries do not need one.
Has the EU battery due diligence requirement been delayed?
Yes. Regulation (EU) 2025/1561 moved its start from August 18, 2025, to August 18, 2027, and businesses with net turnover below €40 million that are not part of a larger group are outside it.
Notes and sources
- Regulation (EU) 2023/1542 (Batteries Regulation), Official Journal text and consolidated text as amended to August 13, 2026, particularly Articles 1, 3(1), 13, 41, 42, 44, 56(3), 95 and 96; Article 11(1) to (3) and (5); Annex I.
- WTO notification G/TBT/N/EU/1181, draft Commission Implementing Regulation on the format and harmonised specifications for battery labelling
- Commission Implementing Decision (EU) 2026/2048 of September 14, 2026, on the harmonised standard for batteries
- Regulation (EU) 2025/1561, amending Regulation (EU) 2023/1542 as regards due diligence obligations, particularly Articles 47 and 48.
- Regulation (EU) 2026/1738 on circularity requirements for vehicle design and on management of end-of-life vehicles
- COM(2025) 981, proposal amending Regulation (EU) 2023/1542 and Regulation (EU) 2024/1244
- European Parliament Legislative Train, procedure 2025/0397(COD)
- procedure ongoing as of November 10, 2026.
- COM(2025) 982, proposal suspending the authorised representative rules for extended producer responsibility
- EUR-Lex procedure 2025/0395/COD
Additional sources:
This article reflects Michelle Ng’s independent opinions, not necessarily those of Daptic.



