EU packaging rules (PPWR): what changed on August 12, 2026 and what comes next

Marc HaddadForward Deployed Regulatory Engineer
The EU Packaging and Packaging Waste Regulation (PPWR), Regulation (EU) 2025/40, has applied directly in every Member State since August 12, 2026. It covers every piece of packaging your products travel in. Its first changes were about who holds each obligation and the paperwork behind it, and the design rules start on January 1, 2030.
Key points
- Scope: The PPWR replaced Directive 94/62/EC on August 12, 2026, and applies to all packaging, whatever the material, including transport and e-commerce packaging.
- Who holds the duties: The manufacturer of the packaging or the packaged product, often the brand owner, holds the design duties and signs an EU declaration of conformity. The producer, which can be a different company, registers for extended producer responsibility in each country.
- Substance limits: Limits on per- and polyfluoroalkyl substances (PFAS) in food-contact packaging have applied since August 12, 2026, while the heavy metal limit did not change.
- Design rules and labels: Rules on recyclability, recycled content, empty space and reuse start on January 1, 2030, and the harmonised label starts on August 12, 2028, at the earliest.
- Authorised representative: Selling directly to end users in another Member State means appointing an authorised representative there, and a proposed suspension has not been adopted.
What is the PPWR?
The PPWR is Regulation (EU) 2025/40, the EU law on packaging and packaging waste. Because it is a regulation, it applies as written in every Member State, whereas the old Directive 94/62/EC had to be transposed (rewritten) into 27 national laws.
The Regulation was published in the Official Journal on January 22, 2025, and entered into force on February 11, 2025. On August 12, 2026, it started to apply, meaning its obligations took effect.[1] On the same date, the Directive was repealed, apart from a few provisions that run out at the end of 2028 or 2029.[2] One more provision of the Directive runs until 30 months after the harmonised label implementing act enters into force.[3]
It applies to you even if you have never made a carton, because the box, the insert, the bag, the pallet and its stretch wrap are all packaging. Member States may not prohibit or restrict packaging that complies.[2] The PPWR sits alongside the other EU sustainability rules for products that manufacturers must follow.
The Commission’s guidance notice, C(2026) 3702, was published in the Official Journal on June 10, 2026, and interprets several points. It is guidance, not law: it says it does not amend the Regulation, and only the Court of Justice can give a binding interpretation.
What changed on August 12, 2026?
On August 12, 2026, the main change was who holds which obligation and what paperwork backs it up. For most manufacturers outside the food sector the packaging itself did not change, but food-contact packaging got new PFAS limits.
The table compares the old Directive with the Regulation on the points that matter most to manufacturers.
| Element | Directive 94/62/EC (until August 11, 2026) | Regulation (EU) 2025/40 (from August 12, 2026) |
|---|---|---|
| Legal form | Directive, transposed into 27 national laws | Directly applicable. Member States may not prohibit or restrict packaging that complies (Article 4(2)) |
| Who holds the design obligations | No defined “manufacturer” of packaging | The manufacturer of the packaging or the packaged product, including whoever has it made under its own name or trademark (Article 3(1), point 13) |
| Heavy metals | Lead, cadmium, mercury and hexavalent chromium: 100 mg/kg combined | Unchanged at 100 mg/kg (Article 5(4)). The glass and plastic crate derogations in Decisions 2001/171/EC and 2009/292/EC remain in force (Article 70(3)) |
| PFAS in food-contact packaging | No packaging-specific limit | 25 ppb for any single PFAS (targeted analysis), 250 ppb for the sum of PFAS, 50 ppm for total PFAS including polymeric PFAS (Article 5(5)) |
| Conformity | Essential requirements, no declaration | Conformity assessment under Annex VII, technical documentation and an EU declaration of conformity covering Articles 5 to 12 (Articles 15(2), 38 and 39). Kept 5 years for single-use and 10 years for reusable packaging (Article 15(3)) |
| Identification | National rules | A type, batch or serial number on the packaging (Article 15(5)). The manufacturer’s name, trademark and postal address on the packaging, or on a data carrier or accompanying document where that isn’t possible (Article 15(6)). The importer’s details as well (Article 18(3)) |
| Extended producer responsibility (EPR) | National schemes | Producers register in each Member State where they first make packaging available, and may not supply it there until registered (Article 44(2) and (4)). A producer selling directly to end users in another Member State appoints an authorised representative there (Article 45(3)) |
| Online platforms | Not addressed | Must collect each producer’s registration number and a self-certification before letting it sell to consumers (Article 45(4)) |
In the table, mg/kg is milligrams per kilogram, ppb is parts per billion, ppm is parts per million, and a derogation is an exception to a rule.
Who does the PPWR apply to?
It applies to all packaging, whatever the material,[2] and to the companies in its supply chain. Two roles carry most of the duties: the manufacturer and the producer, which can be different companies.
Whether an item counts as packaging depends on its function,[2] and the guidance treats the examples in Annex I as indicative only.
Manufacturer: This role holds the design and declaration duties. For sales packaging this is usually whoever fills it with the product, which is often the brand owner. If you make equipment and buy cartons from a converter, you are the manufacturer of that packaging, and the guidance says each supply chain has only one manufacturer. An importer or distributor that puts packaging on the market under its own name, or changes it in a way that affects compliance, becomes the manufacturer.[2]
Producer: This role holds the EPR duties in each Member State. EPR, extended producer responsibility, makes the producer answerable for its packaging in each country, starting with registration there. A distributor established in the destination country that first makes your boxed goods available there is the producer.[2] A distributor that unpacks pallets without being an end user can become the producer of that transport packaging.[2]
Does the PPWR apply to packaging already on the market?
Packaging placed on the market before August 12, 2026, may stay on the market. The guidance says this in its PFAS section and adds that the PPWR has no transitional period for using up stock.
When a product counts as placed on the market depends on the packaging type. In the same PFAS section, the guidance puts sales packaging on the market when it is filled, transport packaging when the empty packaging is supplied, and imports when they are released for free circulation.
Some old rules carry over: the Directive’s requirement to minimise packaging weight and volume continues until December 31, 2029, when Article 10 replaces it.[2] Under the guidance, you don’t need to run the conformity assessment for recyclability until the delegated acts on design for recycling are in force.[2]
When do the PPWR requirements apply?
From 2026 to 2040, the requirements apply in stages. Several dates depend on delegated and implementing acts, the detailed rules the Commission adopts under the Regulation, and some of those are already late.
The table lists each milestone and whether it is adopted, proposed or late.
| Date | Milestone | Status |
|---|---|---|
| January 22, 2025 | Regulation (EU) 2025/40 published in the Official Journal | Adopted |
| February 11, 2025 | Entry into force | Adopted |
| December 10, 2025 | COM(2025) 982 proposes suspending Article 45(3) until January 1, 2035 | Proposed |
| February 12, 2026 | Deadline for the implementing act on the register format (Article 44(14)) | Missed. Draft published August 6, 2026, feedback closed September 10, 2026 |
| August 12, 2026 | PPWR applies, Directive 94/62/EC repealed, PFAS limits for food-contact packaging apply | Adopted, in application |
| August 12, 2026 | Deadline for the harmonised label implementing acts (Article 12(6)) | Missed. Not in the Official Journal at review date |
| October 15, 2026 | Danish packaging order (BEK nr. 851) in force | Adopted (national) |
| October 20, 2026 | Parliament votes amendments to the suspension and refers the file back for negotiations | Proposed, in negotiation |
| February 12, 2028 | Compostable packaging requirements (Article 9) | Adopted |
| August 12, 2028 | Harmonised material composition label (Article 12(1)) | Adopted. The date moves to 24 months after the implementing act, which is already late |
| February 12, 2029 | Reusable packaging label (Article 12(2)) | Adopted. 30 months after the implementing act if that is later |
| January 1, 2030 | Recyclability grades A to C (Article 6), recycled content in plastic packaging of 30%, 10%, 30% and 35% by category (Article 7), minimisation (Article 10), empty space ratio of 50% or less (Article 24), format restrictions in Annex V (Article 25), 40% reusable transport packaging (Article 29) | Adopted. The Article 6, 7 and 24 dates move later if their secondary acts are late |
| January 1, 2035 | Packaging must be recycled at scale (Article 6(2)(b)). Proposed end of the Article 45(3) suspension | Adopted (the recycled-at-scale date moves later if its implementing acts are late) / Proposed |
| January 1, 2038 | Recyclability grades A or B only | Adopted |
| January 1, 2040 | Recycled content rises to 50%, 25%, 65% and 65% | Adopted |
From 2030, the design rules attach to each unit placed on the market from their start date. A carton specified for a product launching in 2027 will almost certainly still be shipping in 2030, so it needs to meet them.
What do manufacturers have to do now?
Work out who holds each duty for each piece of packaging, document what applies today, and register where you are the producer. These steps cover it:
- Map your packaging: Start from the packaging bill of materials, by product and channel. List every packaging component (primary, secondary, transport and e-commerce) against each country and route to market: distributor, own subsidiary, or direct to the end user.
- Name the manufacturer: Work out who the manufacturer is for each component. Sales packaging that ships under your brand is yours, while transport packaging usually belongs to its maker unless you brand it. Ask suppliers for the information Article 16(1) requires them to give you.
- Build the declaration: Cover what applies today: the Article 5 substance limits (heavy metals, plus PFAS for any food-contact packaging), the Article 11 criteria if you claim reusability, and the identification markings. The declaration must show compliance with the requirements of Articles 5 to 12,[2] and it has to stay up to date as more of them apply, so give it an owner.
- Map EPR by country: In each Member State, decide whether you or your distributor is the producer. Where it is you, register before you supply,[2] and appoint an authorised representative where you sell directly to end users from another Member State.[2]
- Read the national supplements: Registers, fees and deposit systems are set nationally (see the next section).
- Plan 2030 designs now: Check each plastic component against the Article 7 categories, remembering that a plastic part under 5% of the total packaging weight is excluded.[2] Check e-commerce and grouped packaging against the 50% empty space ratio.
What national packaging rules apply on top of the PPWR?
The Regulation leaves registers, fees and deposit systems to national law, so each Member State adds its own rules, and Denmark shows what that looks like.
Since October 15, 2026, Denmark’s BEK nr. 851 has required you to register with Dansk Producentansvar at least 14 days before you first make packaging available. It allows one authorised representative per producer at a time. A separate order, BEK nr. 853, requires each beverage product and packaging type to be registered with Dansk Retursystem at least four weeks before sale.
Other Member States are issuing similar orders, each one adds a date to your registration plan, and keeping up with them by hand is the hardest part. Daptic tracks regulatory changes across jurisdictions and flags the ones that affect your products, so you can see which packaging registration rules apply to each of your products in each EU market.
The EU-wide register format is also late: its implementing act was due on February 12, 2026, and a draft was published on August 6, 2026. Once it is adopted, Member States have 18 months to set up harmonised registers,[2] and until then national formats apply.
Do you need an authorised representative in every EU country?
Yes, in each Member State where you sell directly to end users from another Member State,[2] and the obligation is already causing trouble for companies selling across borders.
On December 10, 2025, the Commission proposed suspending it until January 1, 2035, in COM(2025) 982. On October 20, 2026, Parliament voted amendments and referred the file back for negotiations, and nothing is agreed. If negotiations drag on, Article 45(3) keeps applying in full, so plan as if it applies.
The Commission has asked Member States to enforce the obligation “in a constructive and pragmatic way” while the suspension is negotiated, but that is a request, not a legal exemption.
What is still undecided?
Mainly the Commission acts that set the real start dates, so watch these:
- Harmonised label act: Every month of delay pushes back the date the harmonised label applies, and the date by which national labels must be replaced.
- Recycling and recycled content acts: The delegated acts on design for recycling and the implementing act on recycled content both set the actual start of the 2030 obligations.[2] If they come late, the dates move later, but the time you have to redesign packaging shrinks.
- Existing stock: The guidance addresses stock only in its PFAS section. A broader Commission answer to Parliament would settle how stock placed on the market before August 12, 2026, is treated for other requirements.
Example: how a controls maker applies the PPWR
Here is how the steps above play out for one business, a composite of two cases we’ve seen. A controls maker established in Italy ships boxed units on pallets to distributors in Germany and France. It also sells spare boards from its web shop directly to installers in the Netherlands and Denmark.
Manufacturer: It is the PPWR manufacturer of the cartons and inserts everywhere, so the design duties and the declaration of conformity for them are its own in every market.
Producer: For EPR it is the producer in the Netherlands and Denmark, and in Italy only for packaged products it makes available there itself. In Germany and France, the distributors are the producers for the boxed units.
Registrations: In the Netherlands and Denmark, it needs a registration and an authorised representative in each country, because the web shop sells directly to end users.[2] In Denmark, that registration goes to Dansk Producentansvar at least 14 days before it first makes packaging available there.
Design: Before 2030, it checks each plastic component against the Article 7 categories and its web-shop boxes against the 50% empty space ratio.
To apply this to your own products, swap in your countries and channels. The manufacturer answer stays the same across markets, while the producer answer can change from one country to the next.
Frequently asked questions
What is the PPWR?
The PPWR is the EU Packaging and Packaging Waste Regulation, Regulation (EU) 2025/40. It replaced Directive 94/62/EC and has applied directly in every Member State since August 12, 2026.
Does the PPWR apply if my product isn’t packaging?
Yes, it applies to all packaging your products travel in, including cartons, inserts, bags, pallets and stretch wrap. If you buy cartons from a converter and fill them with your product, you are usually the manufacturer of that packaging.
What are the PFAS limits in the PPWR?
Since August 12, 2026, food-contact packaging must stay within 25 ppb for any single PFAS, 250 ppb for the sum of PFAS and 50 ppm for total PFAS including polymeric PFAS.[2]
When do the PPWR recycled content requirements start?
On January 1, 2030, plastic packaging must contain 30%, 10%, 30% or 35% recycled content depending on its category.[2] The targets rise to 50%, 25%, 65% and 65% on January 1, 2040, and the 2030 date moves later if the implementing act is late.
Do I need an authorised representative under the PPWR?
Yes, if you sell directly to end users in a Member State other than your own.[2] A suspension until 2035 has been proposed but not adopted, so plan as if the obligation applies.
Can I keep selling packaging stock made before August 12, 2026?
Packaging placed on the market before August 12, 2026, may stay on the market. The guidance says the PPWR has no transitional period for using up stock.
Notes and sources
- Regulation (EU) 2025/40, Article 71, second paragraph.
- Regulation (EU) 2025/40, OJ L, 2025/40, January 22, 2025, particularly Articles 2(1), 3(1), 4(2), 5(5), 6(4), 7, 21, 39(1), 44, 45(3) and 70.
- Directive 94/62/EC, Article 8(2).
Additional sources:
- Commission Notice, Guidance document for Regulation (EU) 2025/40, C(2026) 3702, OJ C/2026/3084, June 10, 2026
- COM(2025) 982, proposal suspending the authorised representative rules for batteries and packaging, December 10, 2025
- Legislative Observatory, procedure 2025/0395(COD))
- Council document ST 14765/26, October 21, 2026
- European Commission, EPR for packaging for small businesses
- European Commission, draft implementing act on national registers of producers (Have Your Say 15352)
- Denmark, BEK nr. 851 of September 28, 2026 (Emballagebekendtgørelsen)
- Denmark, BEK nr. 853 of September 28, 2026 (Pantbekendtgørelsen)
- Last reviewed: November 7, 2026
This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.



