Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

What is extended producer responsibility (EPR)? What does it mean for manufacturers?

What extended producer responsibility (EPR) means for manufacturers: who the producer is, what to register and report, and how EU and US rules differ.
A timeline card listing US state packaging EPR milestones for Oregon, California, Maryland, Minnesota and Washington, set on soft grey gradient columns.
November 10, 2026

Michelle NgMichelle NgSenior Regulatory Analyst

 

Extended producer responsibility (EPR) is a regulatory approach that makes businesses responsible for certain costs of managing their products and packaging after end users are finished using them. For a manufacturer, EPR typically means registering in applicable markets, reporting the quantity of covered products or packaging they sell, and paying fees that support collection and recycling programs.

 

Key points

 

  • EPR extends responsibility beyond the sale: Businesses contribute to managing products and packaging at the end of their useful lives.
  • It covers more than packaging: Electronics, batteries, and textiles in some markets are also subject to EPR programs.
  • The producer is not always the manufacturer: Responsibility may fall on the brand owner, importer, or online seller.
  • Requirements vary by market: Registration, reporting, fees, and marking obligations depend on the jurisdiction and product category.

What is EPR, and why does it exist?

 

EPR shifts financial and organizational responsibilities for waste to the businesses that introduce products into a market. Traditionally, local governments and taxpayers have carried much of the cost of collecting and managing household waste.

 

The objective is twofold: help finance waste collection and recycling, and encourage manufacturers to consider what happens to their products after consumers dispose of them.

 

For example, some programs calculate fees based on packaging weight, material type, or recyclability. This creates an incentive to reduce unnecessary packaging or use materials that are easier to recycle.

 

EPR does not necessarily mean manufacturers must collect or recycle their own products. Many programs allow businesses to fulfill obligations collectively through a producer responsibility organization (PRO), which coordinates activities and collects fees on their behalf.

What products are covered by EPR?

 

EPR usually covers packaging, electrical and electronic equipment, batteries, and, in some markets, textiles. Coverage varies by jurisdiction.

 

Product category Common examples
Packaging Cardboard boxes, plastic containers, protective packaging
Electrical and electronic equipment Appliances, computers, electronic devices
Batteries Portable batteries and batteries incorporated into products
Textiles Clothing, footwear, and certain household textiles

 

A single product can fall under multiple programs. For example, an electronic device sold with a rechargeable battery and cardboard packaging may create separate obligations for electronics, batteries, and packaging.

 

In the European Union (EU), the Waste Electrical and Electronic Equipment (WEEE) Directive, Batteries Regulation, and Packaging and Packaging Waste Regulation (PPWR) establish separate requirements for these product streams.[1–3] Textile EPR is also expanding. Directive (EU) 2025/1892 was adopted in September 2025. EU countries (called Member States) must turn the directive into national law by June 17, 2027, and establish textile EPR schemes by April 17, 2028. Micro-enterprises get an extra year to comply.[4]

Who is responsible for EPR compliance?

 

The business legally responsible under an EPR law is called the producer. However, the producer is not necessarily the company that physically manufactures the product.

 

Depending on the law, responsibility may fall on the brand owner, importer, distributor, or business selling directly to customers. Consider a factory manufacturing products for another company’s brand. The factory makes the products, but the brand owner may be responsible for the EPR obligations.

 

This distinction is particularly important for manufacturers selling through distributors or online marketplaces. Who makes the product and who is legally responsible for it can be two different businesses.

How does EPR work in practice?

 

Most programs involve four main activities.

 

Registration: Producers identify themselves to the relevant authority or PRO. Registration may be required separately in each market. Reporting: Producers disclose the quantities of covered products or materials they sell or supply in that market, often by weight, material type, or product category. Fees: Producers contribute financially to approved programs. The amount may depend on the material, quantity, or environmental characteristics of the product. Marking and ongoing obligations: Some programs require specific product symbols or consumer information, along with periodic reporting and recordkeeping.

 

For manufacturers, reporting can be more complicated than it first appears. Knowing how many finished products were sold is not always enough. A business may also need information about the materials and weights of individual packaging components.

 

For example, a product sold in a cardboard box may also include plastic wrapping and protective inserts. Depending on the program, each material may need to be identified and reported separately.

 

This means EPR reporting often relies on information from packaging engineering, procurement, and supply chain teams, not just sales records. Even manufacturers that already track their finished products may need additional material data to meet reporting requirements.

How does EPR differ between the EU and US?

 

The EU has established EPR frameworks for several product categories, but registration and reporting obligations often remain country-specific. The United States has no federal EPR law, so each state sets its own.

 

Some businesses selling across EU borders must also appoint an authorized representative, a person or organization that handles EPR obligations for them in another EU country. A business selling directly to end users in an EU country where it has no company usually needs one there. The WEEE Directive, Batteries Regulation, and PPWR each establish rules for when these representatives are required. The requirements differ depending on the product and whether the producer is established within or outside the EU.[1–3]

 

The European Commission has proposed temporarily suspending certain authorized-representative requirements under the Batteries Regulation, PPWR, and WEEE Directive until January 1, 2035. The European Parliament and Council have proposed changes to the scope and duration of these suspensions. These proposals have not yet been adopted, so manufacturers must continue to follow the applicable rules. Requirements for producers established outside the EU may also differ depending on the legislation and national implementation.[5]

 

In the United States, packaging EPR is developing at the state level. Seven states have enacted comprehensive packaging EPR legislation, but their programs are at different stages of implementation.

 

State Law adopted Producer obligation or milestone Status as of November 2026
Maine 2021 Registration and reporting schedule pending. Producers get 90 days to register once a stewardship organization is contracted and its registration system opens. No stewardship organization yet; the first request for proposals drew no bids, and DEP is revising it
Oregon 2021 Producer registration with the PRO, reporting, and fees began July 1, 2025 Operational
Colorado 2022 PRO participation required since July 1, 2025; dues began January 2026 Implementation underway
California 2022 Covered producers were required by June 1, 2026, to register through the approved PRO or register directly with CalRecycle to pursue independent compliance. The PRO handles state registration on behalf of participating producers. Regulations effective May 1, 2026; PRO plan under review
Minnesota 2024 PRO membership required since July 1, 2025; producers fund at least 50% of costs from February 1, 2029 Phased implementation
Maryland 2025 Beginning July 1, 2026, PROs and producers operating independently were required to register with the state. Producers participating through a PRO provide their registration information to that organization. Independent producer responsibility plans are due July 1, 2028, unless a later date applies. Phased implementation
Washington 2025 PRO membership required after July 1, 2026; early producer fees from 2027 Phased implementation; producers outside a PRO can’t sell from March 1, 2029

 

These dates represent different obligations, not a common deadline for registration or fee payments.[6–12] Some states, including California, Maryland, and Washington, also let a producer meet the law on its own instead of through a PRO. For manufacturers operating across multiple states, this means the same packaging may be subject to different reporting requirements, deadlines, and fee structures.

Why does EPR matter to manufacturers?

 

EPR introduces responsibilities that can continue long after a product is sold. A manufacturer selling into several markets may need to identify multiple applicable programs, establish which business is responsible, and maintain the product and material data needed for reporting.

 

Understanding these obligations early makes it easier to manage registration, reporting, and costs as products enter new markets. It can also help manufacturers identify whether their existing product and packaging records contain the information needed to support EPR compliance.

Frequently asked questions

Is EPR mandatory?

Yes, when an applicable law covers the product and identifies the business as a responsible producer. Exemptions and thresholds vary.

Do manufacturers need to register in every EU country?

Only in the countries where they count as the producer. Registration is assessed country by country, and separately for each product stream.

Is EPR the same as a recycling fee?

No. Fees are only one component. EPR can also involve registration, reporting, marking, and recordkeeping.

Does EPR apply to online sellers?

Yes. The EU rules on electronics, batteries, and packaging expressly cover businesses selling directly into a market without a physical establishment there.

Does EPR apply to business-to-business packaging?

Often, yes. The PPWR covers business packaging in the EU, and some US states, such as California, include it too, while others focus on household packaging. Check each law’s definition of covered packaging.

Notes and sources

 

  1. Directive 2012/19/EU — Waste Electrical and Electronic Equipment, particularly Articles 12–17. See also the consolidated text as amended to April 8, 2024.
  2. Regulation (EU) 2023/1542 — Batteries, particularly Articles 55–57. See also the consolidated text as amended to August 13, 2026.
  3. Regulation (EU) 2025/40 — Packaging and Packaging Waste, particularly Articles 44–46.
  4. Directive (EU) 2025/1892 — Waste Framework Directive amendments, including Article 2 and the textile EPR provisions.
  5. COM(2025) 982 — Proposed authorized-representative changes; EUR-Lex legislative procedure 2025/0395/COD; COM(2025) 983 — proposed changes for WEEE, waste, and single-use plastics; and the Council press release of October 21, 2026. Legislative proposals; procedures ongoing as of November 10, 2026.
  6. Maine Department of Environmental Protection — Packaging Stewardship. Implementation schedule and stewardship organization selection. See also the Maine DEP bulletin of June 15, 2026, on start-up registration.
  7. Oregon Department of Environmental Quality — Producers of Covered Products. Producer registration, reporting, and fee obligations.
  8. Colorado HB 22-1355 — Producer Responsibility Program and Colorado Department of Public Health and Environment — Producer Responsibility Program. Statutory requirements and implementation guidance. See also CDPHE’s presentation to the Colorado legislature, February 3, 2026.
  9. California CalRecycle — SB 54 Packaging EPR and SB 54 Permanent Regulations, particularly Section 18980.5.
  10. Minnesota Pollution Control Agency — Packaging EPR. Producer membership and implementation requirements.
  11. Maryland Department of the Environment — Packaging EPR Compliance Guide, October 2026. Registration requirements and producer responsibility plans.
  12. Washington Department of Ecology — Recycling Reform Act and Producer Responsibility Organization guidance. Producer obligations and implementation schedule. See also RCW 70A.208.040, producer and PRO responsibilities.

 

This article reflects Michelle Ng’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today