Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

Toy safety regulations: the EU, UK and US rules compared

Toy safety regulations in the EU, UK and US compared: what counts as a toy, the safety and chemical rules, testing, marking and who is responsible.
A timeline card titled Toy Safety Dates listing five EU and US toy rule dates, with August 1, 2030 marked as the deadline, on indigo gradient columns.
November 19, 2026

Michelle NgMichelle NgSenior Regulatory Analyst

 

Toy safety regulations in the European Union (EU), the United Kingdom (UK) and the United States (US) all cover products made for play by children under 14, but toys reach each market by a different route. The EU and Great Britain let most manufacturers declare conformity themselves against standards, while the US requires accredited third-party testing and a certificate.

 

Key points

 

  • The hazards overlap, the process does not: The US requires testing by a lab the regulator has accepted for every toy meant for children 12 and under, while the EU and Great Britain require a third party only in specific cases.
  • The EU toy law is being replaced: Regulation (EU) 2025/2509 entered into force on January 1, 2026, and applies from August 1, 2030, with wider chemical bans and a digital product passport for every toy.
  • Great Britain still runs the older EU model: It applies the Toys (Safety) Regulations 2011, accepts CE marking alongside UKCA, and is reviewing whether to follow the new EU law.
  • US toy rules come from several sources: The ASTM F963-23 standard is mandatory, alongside federal limits on lead and phthalates, small parts bans, tracking labels and, since July 8, 2026, electronic filing of certificates at import.
  • The importer often carries the duty: In all three markets, the business that brings a toy in from abroad has to check or certify its compliance.

What counts as a toy in the EU, UK and US?

 

All three markets treat a product as a toy when it is designed or intended for play by children under 14, but the US draws a second line at 12 and under for testing and certification.

 

In the EU, the current Toy Safety Directive 2009/48/EC and the regulation replacing it use the same test: a product designed or intended, whether or not exclusively, for use in play by children under 14.[1, 2] The new regulation spells out that intent is judged by what a parent or supervisor could reasonably assume from the product’s functions, size and characteristics, so an “adults only” label does not on its own take a product outside the law.[2] Both laws list products that are not toys, such as detailed scale models sold to collectors aged 14 and over (when the packaging says so), puzzles with more than 500 pieces and festive decorations with no play value.[1, 2] Great Britain uses the same under-14 test and a similar list of exclusions.[3, 4]

 

In the US, ASTM F963 covers playthings for children under 14.[5, 6] A separate term, children’s product, means a product designed or intended primarily for children 12 or younger, and only children’s products need third-party testing and a Children’s Product Certificate (CPC). The Consumer Product Safety Commission (CPSC) sets the age group by weighing the manufacturer’s statement, the packaging and marketing, and how consumers commonly see the product.[7, 8]

 

Borderline products, such as dress-up costumes, collectible figures and novelty items sold to adults, need a recorded decision for each market. Design, packaging and marketing are weighed together, and a decision made for one market does not carry over to the next. Our guide to which regulations apply to your product covers how to make that call.

How are toy safety laws structured in the EU, UK and US?

 

The EU has one toy law handing over to another, Great Britain keeps its own version of the older EU law, and the US combines federal statutes, a mandatory standard and a certification system. The table shows the main instruments and where each stands.

 

Market Main toy law Marking Status as of November 2026
EU Toy Safety Directive 2009/48/EC, replaced by Regulation (EU) 2025/2509 CE Directive applies until the Regulation takes over on August 1, 2030
Great Britain Toys (Safety) Regulations 2011 UKCA or CE In force; reform call for evidence closed October 6, 2026
Northern Ireland EU toy law, under the Windsor Framework CE, or CE and UKNI Follows the EU, including the 2030 switch
US Consumer Product Safety Act; Consumer Product Safety Improvement Act of 2008; ASTM F963-23 (16 CFR part 1250) No safety mark; CPC and tracking labels F963-23 mandatory for toys made after April 20, 2024

 

On November 26, 2025, the EU adopted Regulation (EU) 2025/2509 on the safety of toys. It entered into force on January 1, 2026, but most of it applies only from August 1, 2030, when the Directive is repealed.[2] Toys placed on the market under the Directive before that date can still be sold afterward, and type-examination certificates issued under the Directive stay valid until February 1, 2031, unless they expire sooner.[2] The transition protects stock already on the market, not production that continues after August 1, 2030.

 

In Great Britain, the 2011 Regulations still apply, and since October 1, 2024, CE marking has been recognized indefinitely alongside UKCA marking.[3, 4] From July 6 to October 6, 2026, the Office for Product Safety and Standards (OPSS) ran a call for evidence on whether to follow the EU’s new approach. It is a consultation, not a change to the law, and the current rules still apply.[9, 10]

 

In the US, the Consumer Product Safety Improvement Act of 2008 made ASTM F963 mandatory, and CPSC adopts new versions by rule. ASTM F963-23 has applied to toys manufactured after April 20, 2024, and CPSC added its own requirements for water bead toys from March 12, 2026, and for neck floats from June 15, 2026.[11–13]

How do EU, UK and US toy safety requirements compare?

 

The hazards covered are much the same in all three markets; the differences sit in the limits and test methods. This table compares the main areas, with the EU and Great Britain together because Great Britain’s rules still follow the Directive.

 

Area EU (Directive) and Great Britain US
Mechanical and physical Essential requirements on edges, cords, small parts and more; EN 71-1 ASTM F963-23; small parts banned in toys for children under 3 (16 CFR part 1501)
Flammability Essential requirements; EN 71-2 ASTM F963-23, section 4.2
Heavy metals Migration limits for 19 elements; EN 71-3 Lead: 100 ppm in accessible parts (15 U.S.C. 1278a), 90 ppm in paint and coatings (16 CFR part 1303); F963 limits for other metals
Other chemicals CMR substances restricted; 55 allergenic fragrances banned Eight phthalates limited to 0.1% in children’s toys (16 CFR part 1307)
Electrical Maximum 24 volts ASTM F963-23, section 4.25; 16 CFR part 1505
Age warnings Minimum age; “not suitable for children under 36 months” where relevant Choking hazard warnings for toys with small parts for ages 3 to 6, and for small balls and marbles for ages 3 and up (16 CFR 1500.19)

 

One difference sits behind the whole table. In the EU and Great Britain, the law sets the requirements and the EN 71 standards are a voluntary way to meet them; a toy that meets a standard whose reference is published in the Official Journal is presumed to meet the requirements it covers.[1, 14] In the US, ASTM F963 is itself the mandatory rule. Great Britain publishes its own list of designated standards, which has to be checked separately from the EU list.[15]

What does the new EU Toy Safety Regulation change?

 

The Regulation keeps the Directive’s basic model but tightens the chemical rules, replaces the paper declaration with a digital product passport and adds duties for online sales. A toy that complies with the Directive today will not automatically comply in August 2030.

 

  • Chemicals: Toys may not contain substances classified as carcinogenic, mutagenic or toxic to reproduction (CMR) in categories 1A, 1B or 2, endocrine disruptors in categories 1 or 2, certain sensitizers, intentionally used per- and polyfluoroalkyl substances (PFAS) or 10 listed bisphenols, with exceptions for technically unavoidable traces and for specific permitted uses the Regulation lists.[2]
  • Fragrances: 59 fragrance allergens are prohibited above 10 mg/kg, more are restricted in toys for children under 36 months or meant for the mouth, and 65 must be named on the toy or its packaging when present above 10 mg/kg.[2]
  • Digital product passport: Before placing a toy on the market, the manufacturer must create a passport, reachable through a data carrier on the toy, and upload its identifier to a Commission registry that customs will check. The passport carries the laws and standards applied and any notified body certificate, taking over the role of the declaration of conformity.[2]
  • Safety assessment: The pre-market assessment must cover chemical, physical, mechanical, electrical, flammability, hygiene and radioactivity hazards, including combined exposure to chemicals.[2]
  • Online sales: Fulfillment service providers and online marketplaces get their own obligations, and warnings must be visible before purchase, including online.[2]

 

Toys with connected or AI features also fall under EU radio and cybersecurity laws, which are outside this article. Chemical rules for other finished products are covered in our guide to restricted substances.

How does a toy get to market in the EU, UK and US?

 

In the EU and Great Britain, most manufacturers assess their own toys against standards and sign a declaration; in the US, an accepted lab must test every children’s toy and the importer or domestic manufacturer certifies it.

 

EU: If the manufacturer applies harmonized standards covering every relevant requirement, it can use internal production control, meaning it checks its own design and production. If no standard exists, a standard was applied only in part or carries a restriction, or the manufacturer judges outside verification necessary, a notified body (an independent organization designated by an EU country) must carry out a type examination.[1, 2] The manufacturer then draws up technical documentation, signs the EU declaration of conformity (the passport from 2030), affixes the CE mark and keeps the documentation for 10 years.[1, 2]

 

Great Britain: The route is the same, with designated standards, a UKCA or CE mark, and a UK Approved Body or EU notified body where a third party is needed. Warnings must be in English, and documentation is kept for 10 years.[3, 4]

 

US: A toy for children 12 and under must be tested for every applicable rule by a third-party lab that CPSC has accepted, and the CPC must list each rule, such as 16 CFR part 1250 and the relevant ASTM F963 sections.[6, 16, 17] The toy and its packaging must, to the extent practicable, carry permanent tracking labels identifying the source, production date and batch.[16] Since July 8, 2026, importers have had to file certificate data electronically at entry, and goods entered from a foreign trade zone follow from January 8, 2027. The difference between a CPC and a GCC is covered in GCC vs CPC.[18]

Who is responsible for toy compliance in each market?

 

The manufacturer is responsible in all three markets, but when the manufacturer is abroad, the importer has checking or certifying duties of its own.

 

In the EU, a business that markets a toy under its own name or trademark counts as the manufacturer even if a contract factory made it.[1, 2] A manufacturer outside the EU may appoint an authorized representative by written mandate, though it cannot hand over the duty to draw up technical documentation.[1, 2] Toys are among the products that need a business established in the EU, such as an importer, authorized representative or fulfillment service provider, to hold documents and deal with authorities.[19] The importer must check that conformity assessment was done, the documentation exists and the CE mark and labels are in place (and from 2030 that the passport exists), and must add its own name and address.[1, 2]

 

Great Britain mirrors this: the importer is the UK business that places a toy from outside the UK on the GB market, and an authorized representative for GB must be based in the UK.[3, 4] In the US, the law treats an importer as a manufacturer, so the importer must certify the toy and issue the CPC even when a foreign supplier arranged the testing.[7, 17]

How do teams keep track of toy safety changes?

 

Most changes arrive through a few channels in each market, and a team can watch them on a schedule rather than waiting for a supplier or test lab to mention them.

 

  • EU: acts the Commission adopts under the Regulation, including changes to the chemical lists and the passport’s technical details, and amendments to the list of harmonized toy standards, which changed on September 9, 2025, December 15, 2025, and September 11, 2026.[2, 14]
  • Great Britain: the government’s response to the 2026 call for evidence, regulations made under the 2025 Act and the designated standards list.
  • US: CPSC rules amending 16 CFR part 1250, new ASTM F963 versions and open proposals, such as the August 13, 2024, proposed rule on toys with button or coin cell batteries.[20]

 

The markets can drift apart. On August 29, 2026, an EU change allowing cobalt in a few toy components, such as parts that conduct electricity and certain magnets, began to apply in the EU and Northern Ireland, while Great Britain’s rules do not change automatically when the EU’s do.[21, 22] Teams that would rather not watch each source by hand can use Daptic, which tracks regulatory changes across jurisdictions and flags the ones that affect a company’s products, and works out which requirements apply to each toy in each market.

Example: a battery-powered plush toy sold in all three markets

 

As an example of applying this to a product, consider a composite: a plush animal with a sound module on replaceable batteries, labeled for ages 18 months and up, made by a contract factory and sold in all three markets.

 

In the EU, the brand owner assesses it under the Directive against the EN 71 parts, focusing on seams and detachable parts for under-36-month users, batteries that must not be reachable without a tool, and the 24-volt limit. If the standards cover every requirement, no notified body is needed. Before August 2030, the team checks fabric treatments for PFAS and plastic housings for listed bisphenols, and gathers the data the passport will hold.

 

In Great Britain, the same test reports support a CE or UKCA mark, with English warnings and the GB importer’s details on the toy.

 

In the US, an accepted lab tests the toy to ASTM F963-23, including its battery requirements, checks lead in the substrate and any paint, tests plasticized parts such as vinyl eyes for phthalates and confirms nothing small comes loose. The US importer issues the CPC, files its data at entry and makes sure a sewn-in label carries the tracking information. Warnings under California’s Proposition 65 are a separate question for US sales.

Frequently asked questions

Is CE marking accepted for toys in the UK?

Yes. Great Britain accepts CE marking for toys indefinitely alongside UKCA marking, and Northern Ireland requires CE marking because EU toy law applies there.

Do toys need third-party testing in the EU?

Not always. A manufacturer can assess a toy itself when it applies harmonized standards covering every relevant requirement; otherwise a notified body must carry out a type examination.

When does the new EU Toy Safety Regulation apply?

From August 1, 2030. It entered into force on January 1, 2026, and toys placed on the market under the Directive before August 1, 2030, can still be sold afterward.

Does a toy for teenagers need a Children’s Product Certificate?

No, not if it is designed primarily for children over 12. Third-party testing and a CPC apply to children’s products for ages 12 and under, although ASTM F963 can still cover toys for children under 14.

What is a digital product passport for toys?

It is an electronic record, reached through a data carrier on the toy, that every toy placed on the EU market will need from August 1, 2030. It holds the toy’s compliance information and takes over the role of the declaration of conformity.

Notes and sources

 

  1. Directive 2009/48/EC (Toy Safety Directive), with the consolidated text as amended to August 29, 2026, particularly Articles 3–6, 8, 13, 15–17 and 19; Article 2(1) and Annex I.
  2. Regulation (EU) 2025/2509 (Toy Safety Regulation), particularly Articles 2(1), 3, 6(3), 7–9, 11, 12, 14, 19, 20, 22, 23, 25, 49, 56, 57 and 59; Article 2(1) and Annex I; Annex II, Part III, points 4 to 8, and Appendix, Parts C and D; Annex II, Appendix, Part A, points 4 and 5, and Part B; Article 26 and Annex IV.
  3. Toys (Safety) Regulations 2011 (SI 2011/1881)
  4. OPSS, Toys (Safety) Regulations 2011: Great Britain
  5. 16 CFR part 1250 (Safety standard mandating ASTM F963 for toys)
  6. CPSC, Toy Safety Business Guidance
  7. 15 U.S.C. 2052 (Consumer Product Safety Act, section 3), particularly section 3(a)(2)); section 3(a)(11)).
  8. 16 CFR 1200.2, particularly § 1200.2.
  9. OPSS, Toys safety regulations: call for evidence
  10. Product Regulation and Metrology Act 2025
  11. CPSC, Safety Standard Mandating ASTM F963 for Toys
  12. CPSC, Safety Standard for Toys: Requirements for Water Beads
  13. CPSC, Mandatory Toy Safety Standards: Requirements for Neck Floats
  14. Commission Implementing Decision (EU) 2023/740, and the European Commission’s toy safety harmonised standards page
  15. UK Department for Business and Trade, Designated standards: toy safety
  16. 15 U.S.C. 2063 (Consumer Product Safety Act, section 14), particularly section 14(a)(2)); section 14(a)(5)).
  17. 16 CFR part 1107 and 16 CFR part 1110
  18. CPSC, Certificates of Compliance, Federal Register document 2024-30826, January 8, 2025, as corrected by Federal Register document 2025-18521, September 24, 2025.
  19. Regulation (EU) 2019/1020 (Market Surveillance Regulation), particularly Article 4.
  20. CPSC, Safety Standard for Toys: Requirements for Toys Containing Button Cell or Coin Cell Batteries
  21. Commission Directive (EU) 2026/192
  22. UK Government, Explanatory memorandum on the safety of toys as regards cobalt

 

Additional sources:

 

 

This article reflects Michelle Ng’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today