PSE certification: Japan’s electrical safety rules for imported products

Michelle NgSenior Regulatory Analyst
PSE certification is how an electrical product earns the PSE mark it needs to be sold in Japan under the Electrical Appliances and Materials Safety Act (the DENAN law). The importer or Japanese manufacturer notifies the Ministry of Economy, Trade and Industry (METI), meets Japan’s technical standards, keeps inspection records and, for higher-risk products, obtains a third-party certificate.
Key points
- PSE is not a certificate a foreign factory owns: The legal duty sits with the business that notifies METI as manufacturer or importer, which is usually the Japanese importer.
- Two categories, two marks: Specified products carry a diamond-shaped mark and need assessment by a registered conformity assessment body, while non-specified products carry a round mark and are self-declared.
- Non-specified does not mean exempt: Those products must still meet the technical standards, be inspected in production and have their records kept for three years.
- Overseas online sellers are covered directly: Since December 25, 2025, an overseas business selling straight to consumers in Japan counts as an importer and must appoint a domestic administrator there.
- Selling without the mark is an offense: METI can ban marking and order recalls, and the most serious offenses carry fines of up to 100 million yen for a company.
What is PSE certification?
PSE certification is the everyday name for meeting the DENAN law’s obligations so that a covered product can carry the PSE mark. The law exists to prevent danger and electromagnetic interference from electrical products by regulating how they are made, imported and sold.[1]
The rules attach to the product entering the Japanese market, so they apply wherever it is made. A covered product without the mark may not be sold or displayed for sale by its manufacturer, its importer or any retailer.[1] PSE is one of many national product certification marks by country, each with its own rules.
A common misconception is that PSE is a certificate a foreign factory applies for and then holds, like a test report. It isn’t. The mark is the declaration of a business registered with METI that has met its obligations, and where a third-party certificate is needed, it is issued to that business.[1]
Who is responsible for PSE compliance in Japan?
The business that makes the product in Japan, or imports it into Japan, holds the legal duty once it has notified METI. In this article, this business is called the notifying supplier, and only a notifying supplier may put the PSE mark on a product.[1]
The notification goes to METI within 30 days of starting the business and covers the supplier’s name and address, the product type classifications it handles and the factories that make them.[1] Because the mark is reserved for notifying suppliers, the notification in practice comes before the first sale.
A foreign manufacturer with no Japanese company is usually not the notifying supplier. Consider an overseas factory that makes kitchen appliances for a Japanese brand: the brand’s importing company notifies METI, holds the certificates and records and answers to METI, while the factory supplies the design data, test reports and production inspection results the importer relies on.
On December 25, 2025, amendments took effect that treat an overseas business as the importer when it sells directly to consumers in Japan and has the goods brought in for delivery to them.[1, 2] The law calls an importer based outside Japan, such as this business, a specified importer. It must name a domestic administrator, a person or company in Japan, in its notification, give that administrator copies of its inspection records and certificates, and confirm the administrator meets its obligations before marking any product.[1] METI can also ask online marketplaces to stop the sale of a dangerous product when the business responsible for it cannot be identified or reached.[1]
Which products need a PSE mark?
Every product listed in the law’s enforcement order needs the mark, and the list is split into specified products and non-specified ones. The enforcement order (a Cabinet Order issued under the Act) lists specified items in Appended Table 1 and the rest in Appended Table 2.[2]
What separates them is risk: specified products are those the government has designated as particularly likely to cause danger or electromagnetic interference because of how they are built or used.[1] The table below shows how the two categories differ in practice.
| Specified products | Non-specified products | |
|---|---|---|
| Listed in | Appended Table 1 of the enforcement order | Appended Table 2 of the enforcement order |
| Mark | Diamond-shaped PSE mark | Round PSE mark |
| Conformity assessment | By a registered conformity assessment body, with a certificate before sale | Self-declared by the notifying supplier |
| Technical standards, production inspection, three-year records | Required | Required |
| Examples | AC adapters (DC power supply units), wiring devices, electric heating toys | Lithium-ion batteries within the size threshold, many household appliances |
Non-specified does not mean exempt. Those products face the same technical standards and the same inspection and record-keeping duties, and the only differences are that no third-party assessment is required and the mark is round.
Coverage then turns on the type of product:
- Electrical and electronic equipment, radio included: Many entries are limited to mains equipment, for example items rated 100 to 300 volts at 50 or 60 hertz, so a device that runs only on batteries can fall outside the list while its charger is covered. Radio equipment that plugs into the mains can need PSE as well as Radio Act certification.
- Batteries: Lithium-ion storage batteries are non-specified items when each cell reaches an energy density of 400 watt-hours per liter, but batteries for cars, motorized bicycles, medical equipment and industrial machinery are excluded.[2]
- Children’s products and toys: Electric heating toys and motor-driven electric toys are specified items, while other electrical toys are checked against the list entry by entry.[2]
- Machinery and industrial equipment: Each entry carries voltage, capacity and use conditions, so a machine and each of its components are checked against those conditions, which often decide the answer.
For manufacturers selling in several markets, this scoping repeats country by country, and Daptic works out which requirements apply to a product in each market and flags the regulatory changes that affect it.
How do you get PSE certification?
There are six steps, and the law expects them in this order.
- Confirm coverage and category: Match the product to an entry in Appended Table 1 or 2, including its voltage, capacity and exclusion conditions, and check METI’s published interpretations of scope where the wording is unclear.
- Notify METI: The manufacturer or importer files its notification by product type classification within 30 days of starting the business, and a specified importer names its domestic administrator.
- Meet the technical standards: The Ministerial Ordinance on Technical Standards for Electrical Appliances and Materials (METI Ordinance No. 34 of 2013) has set performance-based requirements since January 1, 2014.[3] METI’s official interpretation of the ordinance gives detailed ways to meet them, including Japanese standards based on International Electrotechnical Commission (IEC) standards, numbered with a J.[4] The ordinance is the law, and the J standards are a recognized way of showing a product meets it.
- Get a conformity assessment for specified products: Before sale, a registered conformity assessment body tests the product and issues a certificate if it conforms, and the notifying supplier must keep it.[1] Bodies outside Japan can be registered too, as foreign registered conformity assessment bodies.[1] A certificate covers a product type for a period the enforcement order sets at three, five or seven years depending on the product, after which the type is assessed again.[1, 2]
- Inspect production and keep records: Every covered product, specified or not, is inspected by the methods in the enforcement regulation (METI’s ministerial ordinance under the Act), and the record of product, date, place, inspector, quantity, method and result is kept for three years from the inspection.[1, 5]
- Mark and label: Only then does the notifying supplier mark the product, as the next section describes.
What must appear on a PSE label?
The label shows the PSE mark, the notifying supplier’s name and, for specified products, the name of the conformity assessment body that issued the certificate.[5] An approved abbreviation or a registered trademark notified to METI can replace the full name.
The mark is diamond-shaped for specified products and round for non-specified ones, and on small components such as wires and fuses a text form, <PS>E or (PS)E, can be used instead.[5] Separately, the technical standards require safety information and precautions for use to be shown in a visible place, in a way that does not easily wear off.[3]
Because the label names the notifying supplier, a product sold through two importers can carry two different names, one per channel.
What happens if a product is sold without a PSE mark?
Selling or displaying a covered product without the mark is a criminal offense for the manufacturer, importer and retailer alike. METI can order a notifying supplier to improve its methods, ban it from marking a product type for up to a year, order recalls or other measures to prevent harm, and publish the names of businesses that break the law.[1]
The Act sets these penalties:[1]
- Selling unmarked products, misusing the mark or ignoring a hazard prevention order: up to one year of imprisonment, a fine of up to 1 million yen, or both.
- Failing to notify or to keep inspection records: a fine of up to 300,000 yen.
- Companies: fines of up to 100 million yen for the most serious offenses, including breaching a hazard prevention order.
How is PSE different from other Japanese product rules?
PSE covers electrical safety and interference only, and two other regimes are often mixed up with it.
- Radio Act: Wireless equipment needs a separate technical conformity certification, or self-confirmation for some low-interference equipment, with its own mark.[6]
- Consumer Product Safety Act: This law has its own list of “specified products” judged highly likely to cause serious harm, and its own PSC mark, so the word “specified” points to a different list in each law.[7]
A product can need more than one of these, and holding one mark says nothing about the others.
How do manufacturers keep up with changes to PSE rules?
Changes come from three places, and each can restart part of the work.
- The technical standards: METI revises its interpretation to adopt newer editions of the IEC-based J standards, which can change the tests for an existing product type.
- Scope: METI’s interpretations move products in and out. METI treats power banks as lithium-ion batteries that need the mark.[8]
- The law itself: The December 25, 2025, amendments brought overseas direct sellers and online marketplaces into the regime.
Certificates for specified products also run out after their set period, so each product’s assessment date belongs in its records.
Example: applying PSE to a power bank and its AC adapter
As an example of applying this to a product, consider a composite manufacturer outside Japan that sells a power bank with a plug-in AC adapter, both through a Japanese distributor and through its own online store shipping directly to consumers.
The adapter is a DC power supply unit, an item in Appended Table 1, so it is a specified product. It needs a certificate from a registered conformity assessment body before sale, the diamond mark and that body’s name on the label.
The power bank is different. METI treats a power bank as a lithium-ion storage battery even though it contains charging circuits, so if its cells reach 400 watt-hours per liter it is a non-specified product.[8] It carries the round mark with no third-party certificate, but the technical standards, production inspections and three-year records still apply.
Then comes the question of who holds the duty. For distributor sales, the distributor imports the goods and notifies METI. For direct online sales, the manufacturer is a specified importer, notifies METI itself and appoints a domestic administrator. Each notifying supplier puts its own name on the label, so the two channels can need different labels for the same product.
Frequently asked questions
Can a foreign manufacturer get PSE certification itself?
Yes, if it is the importer itself, as it is when it sells directly to consumers in Japan. It then notifies METI as a specified importer and appoints a domestic administrator. Otherwise the Japanese importer holds the duty, and the foreign maker supports it with design data, test reports and inspection records.
Do non-specified products need PSE testing?
Yes. They must meet the technical standards and be inspected in production, with records kept for three years, and they only skip third-party assessment.
What is the difference between the diamond and round PSE marks?
The diamond mark is for specified products, which need a certificate from a registered conformity assessment body. The round mark is for non-specified products, which the notifying supplier self-declares.
Do power banks need a PSE mark?
Yes, in most cases. METI treats power banks as lithium-ion storage batteries, which need the round mark when their cells reach 400 watt-hours per liter.
How long must PSE records be kept?
Three years from the date of each inspection. Certificates for specified products are kept too, and a product type is reassessed after three, five or seven years depending on the product.
Notes and sources
- Electrical Appliances and Materials Safety Act (Act No. 234 of 1961), current Japanese text on e-Gov; official English translation, as amended to Act No. 122 of 2011, particularly Articles 1–3, 8–10, 27(1) and 57–59; Articles 42-6 and 42-7; Articles 42-3 and 42-4; Articles 11, 12, 42-5 and 42-8.
- Order for Enforcement of the Electrical Appliances and Materials Safety Act (Cabinet Order No. 324 of 1962), current Japanese text on e-Gov; official English translation, as amended to 2012, particularly Article 1 (effective date December 25, 2025).
- Ministerial Ordinance on Technical Standards for Electrical Appliances and Materials (METI Ordinance No. 34 of 2013), current Japanese text on e-Gov, particularly Article 19.
- METI, Interpretation of the Ministerial Ordinance on Technical Standards for Electrical Appliances and Materials
- Regulation for Enforcement of the Electrical Appliances and Materials Safety Act (METI Ordinance No. 84 of 1962), current Japanese text on e-Gov; official English translation, as amended to 2016, particularly Articles 11 and 17.
- Radio Act (Act No. 131 of 1950), Chapter III-2.
- Consumer Product Safety Act (Act No. 31 of 1973), official English translation, particularly Articles 2(2) and 13.
- METI, Interpretation of the scope of electrical appliances and materials (lithium-ion storage batteries), as amended February 1, 2018; METI, Mobile battery FAQ
Additional sources:
- METI, List of the Specified Electrical Appliances and Materials (116 Items)
- METI, Electrical Appliances and Materials Safety Act regulatory instructions
- Radio Act (Act No. 131 of 1950), official English translation
This article reflects Michelle Ng’s independent opinions, not necessarily those of Daptic.



