Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

EU POPs Regulation: the substance bans that reach finished products

How the EU POPs Regulation 2019/1021 reaches finished products: the listed substances, trace limits, exemptions, recycled content and what to do next.
A card listing five scheduled EU POPs Regulation trace limit changes from May 2027 to August 2029, with the May 17, 2027 toy plastics date marked as the next deadline, on a slate gradient background.
November 18, 2026

Michelle NgMichelle NgSenior Regulatory Analyst

 

The EU POPs Regulation, Regulation (EU) 2019/1021, bans the manufacture, placing on the market and use of the persistent organic pollutants listed in its annexes, whether on their own, in mixtures or inside finished products. Manufacturers, importers and distributors must keep each listed substance below its trace limit unless a specific exemption covers the use.

 

Key points

 

  • The ban reaches finished goods: A listed substance in a plastic part, foam, coating or cable puts the product in breach, even if its maker never bought the chemical.
  • Trace limits decide the exposure: Each substance has its own limit, from 0.01 mg/kg to 1% by weight, and several are scheduled to tighten.
  • Recycled content and spare parts are where old POPs turn up: Flame retardants banned years ago survive in recovered plastics, which have their own time-limited allowances.
  • The list keeps growing: New listings under the global Stockholm Convention are added by amendment, most recently chlorpyrifos on September 30, 2026, so an older supplier declaration may not cover today’s annex.
  • Importers carry the duty for goods made elsewhere: Importing counts as placing on the market, so the EU importer answers for what the factory used.

What is the EU POPs Regulation?

 

The POPs Regulation is the EU law that controls persistent organic pollutants (POPs) from manufacture to waste, for any product, not only chemicals. It brings into EU law the Stockholm Convention on Persistent Organic Pollutants, a global treaty, and the 1998 Protocol on POPs to the United Nations Economic Commission for Europe (UNECE) Convention on Long-Range Transboundary Air Pollution.

 

Regulation (EU) 2019/1021 was adopted on June 20, 2019, entered into force on July 15, 2019, and recast the earlier Regulation (EC) No 850/2004.[1] Because it is a regulation, it applies directly in every EU country without being written into national law, while each country names its enforcement authorities and sets penalties.[1]

 

It is separate from REACH, the EU’s general chemicals regulation, but it borrows REACH’s definitions of an “article” and of “placing on the market”.[1, 2] Meeting REACH obligations does not show compliance with the POPs Regulation, because the two laws keep separate lists. For how the POPs ban sits alongside the other chemical rules, see which restricted substances rules apply to finished products.

What is a persistent organic pollutant?

 

A persistent organic pollutant is a chemical that breaks down very slowly, builds up in people and animals, travels long distances through air and water, and harms health or the environment. Because these substances cross borders, they are banned through a global treaty rather than country by country.

 

The early listings were pesticides such as DDT and industrial chemicals such as polychlorinated biphenyls (PCBs). Later ones include substances still found in products made today: brominated flame retardants, chlorinated paraffins used in PVC and rubber, certain per- and polyfluoroalkyl substances (PFAS), the plastics UV stabilizer UV-328 and the flame retardant Dechlorane Plus.

Which substances does the POPs Regulation ban?

 

The banned substances are listed in Annex I, and the regulation prohibits their manufacture, placing on the market and use, subject to the exemptions in Article 4.[1] Annex II is for substances that are restricted rather than banned, but the consolidated text of September 30, 2026, lists none there.[1]

 

The table below shows what each annex does.

 

Annex What it contains What it means for a product
I Prohibited substances: Part A for those listed under the Stockholm Convention, Part B for those listed only under the UNECE Protocol (currently empty) Banned, subject to the exemptions and trace limits in each entry
II Restricted substances No entries as of September 30, 2026
III Substances subject to release reduction, such as dioxins Mainly affects industrial emissions
IV Waste limits, called low POP content limits Decides whether waste containing POPs can be recycled
V Permitted waste treatment operations Applies to waste above the Annex IV limits

Does the POPs Regulation apply to finished products?

 

Yes. The prohibition covers listed substances on their own, in mixtures and in articles, and an article is any object whose shape, surface or design matters more to its function than its chemical makeup, which takes in almost every finished good.[1, 2]

 

A common mistake is to read the regulation as a rule for chemical makers. A business that never buys a listed chemical can still place one on the market inside a component, such as a flame retardant in a molded housing or a plasticizer in a cable jacket. Where POPs most often turn up differs by product category:

 

  • Electrical and electronic equipment: Flame retardants in housings, circuit boards and wire coatings, and chlorinated paraffins in PVC cable. The entries for polybrominated diphenyl ethers (PBDEs) exempt equipment within the scope of the RoHS Directive, which sets its own limits, but every other listed POP applies in full.[1]
  • Toys and childcare articles: Recycled plastics, which face a tighter PBDE allowance than other products.[1]
  • Machinery, vehicles and aircraft: Flame-retarded parts, rubber, sealants and coatings, with separate rules for spare parts in several entries.
  • Textiles, furniture and building products: Back-coatings, foams, water-repellent finishes and polystyrene insulation.

What concentration limits apply under the POPs Regulation?

 

Below a set concentration, a listed substance counts as an unintentional trace contaminant, and the ban does not apply to it.[1] Each Annex I entry sets its own figure, often with separate limits for the pure substance, for mixtures and articles, and for recycled material.

 

The exemption covers contamination, not deliberate use, so it is not a way to add a listed substance on purpose at a low level. The table below shows the limits for the listed substances most likely to appear in manufactured goods, where mg/kg means milligrams per kilogram, or parts per million.

 

Substance and common use Limit in Annex I Scheduled change
PBDEs, including decaBDE (flame retardants in plastics and textiles) 10 mg/kg each in substances; 10 mg/kg combined in mixtures and articles; 350 mg/kg combined in mixtures and articles made with recovered material, since December 30, 2025 Recovered material: 200 mg/kg from December 30, 2027; 10 mg/kg for toys and childcare articles from May 17, 2027
HBCDD, hexabromocyclododecane (polystyrene insulation, textiles) 75 mg/kg; 100 mg/kg in recycled polystyrene for building insulation None scheduled
SCCPs, short-chain chlorinated paraffins (PVC, rubber, sealants) Below 1% by weight in substances and mixtures; below 0.15% in articles None scheduled
PFOS, PFOA and PFHxS (repellent coatings, firefighting foams) 0.025 mg/kg for the acid and its salts; 1 mg/kg for related compounds None scheduled
UV-328 (UV stabilizer in plastics and coatings) 100 mg/kg 10 mg/kg from August 4, 2027; 1 mg/kg from August 4, 2029
Dechlorane Plus (flame retardant in wire coatings and plastics) 1,000 mg/kg 1 mg/kg after April 15, 2028
Chlorpyrifos and methoxychlor (pesticides) 0.01 mg/kg None scheduled

What exemptions apply under the POPs Regulation?

 

There are two kinds: general exemptions in Article 4 that apply to every listed substance, and specific exemptions written into individual Annex I entries for named uses, usually with an end date.

 

General exemptions: Besides trace contaminants, the ban does not apply to laboratory-scale research or reference standards.[1] Articles already in use before the ban reached a substance can stay in use, and for substances listed after July 15, 2019, articles produced by the date the listing applied get six more months.[1]

 

Specific exemptions: Examples include spare parts for older motor vehicles containing decaBDE, until 2036 at the latest; spare parts in named sectors containing UV-328 or Dechlorane Plus, in some cases until December 31, 2043; and the recycled-material allowances for PBDEs and HBCDD.[1] Each covers only the use it names, so a business relying on one should record the entry and its end date.

Who is responsible under the POPs Regulation?

 

The ban binds every business that manufactures, places on the market or uses a listed substance, which includes manufacturers, importers and distributors. Unlike EU product safety laws, it does not split duties by role; it prohibits the activity, whoever carries it out.

 

Placing on the market means supplying a product to someone else, and import into the EU counts as placing on the market.[1, 2] That is why importers carry the burden for goods made elsewhere: a factory outside the EU is beyond the regulation’s reach, and the importer is the first business to supply the product inside it.

 

Each EU country designates competent authorities to enforce the regulation and sets penalties that must be effective, proportionate and dissuasive.[1] Information duties for product companies are limited: holders of more than 50 kg of a listed substance with a permitted use must report the stockpile, and a few Annex I entries require exempted products to be identifiable or labeled.[1, 3]

How does the POPs Regulation list change?

 

Annex I grows when the Stockholm Convention lists a new substance and the Commission then adds it by delegated regulation, one act per substance.[1] The EU entry, not the global listing, is what binds businesses in the EU, and its dates and exemptions can differ.

 

In May 2025, the convention’s parties listed chlorpyrifos, medium-chain chlorinated paraffins (MCCPs) and long-chain perfluorocarboxylic acids (PFCAs).[4]

 

On August 4, 2025, UV-328 was added to Annex I with a trace limit that steps down to 1 mg/kg by 2029, and on October 15, 2025, Dechlorane Plus followed.[5, 6]

 

On November 17, 2025, an amendment tightened the PBDE limits for mixtures, articles and recovered material.[1]

 

On January 1, 2026, Regulation (EU) 2025/2457 began to apply, letting the Commission change the waste limits in Annexes IV and V by delegated act.[1, 7]

 

On September 30, 2026, chlorpyrifos was added, with a 0.01 mg/kg limit and no specific exemptions.[8]

 

As of September 30, 2026, MCCPs and long-chain PFCAs were not in Annex I. The Commission has adopted a delegated act for MCCPs, which matter for PVC cable, rubber and sealants, but it had not taken effect by then, so the current annex applies until it does.[1, 9]

 

A supplier declaration speaks to the annex as it stood when it was signed, so one from two years ago cannot cover Dechlorane Plus or chlorpyrifos. Keeping declarations current means following the convention’s decisions, the Commission’s drafts and the Official Journal, and Daptic tracks regulatory changes like these across jurisdictions and flags the ones that affect a company’s products, so a team can see which POPs amendments touch its products before refreshing its supplier declarations.

What do the POPs waste rules mean for recycled material?

 

Waste containing a listed POP at or above its low POP content limit in Annex IV must be treated so the POP is destroyed or irreversibly transformed, which keeps that waste out of recycling.[1] Waste below the limit can be recycled under normal waste rules, and the recycled material then has to meet the Annex I limits when it goes into a new product.

 

That is how old flame retardants reach new goods: plastic from discarded electronics and vehicles can fall below the waste limit and still carry PBDEs into recycled pellets. The table below shows selected Annex IV limits.

 

Substance Low POP content limit
PBDEs, combined 350 mg/kg from December 30, 2025; 200 mg/kg from December 30, 2027
HBCDD 500 mg/kg, which the Commission must review by December 30, 2027, and may lower to no more than 200 mg/kg
SCCPs 1,500 mg/kg
PFOS 50 mg/kg
PFOA and PFHxS 1 mg/kg for the acid and its salts; 40 mg/kg for related compounds

What do manufacturers have to do to comply?

 

Compliance comes down to knowing which components could contain a listed substance, getting evidence from suppliers and keeping that evidence current.

 

  1. Map the Annex I substances against the bill of materials, starting with plastics, foams, rubber, PVC, coatings, textiles and anything made with recovered material.
  2. Ask suppliers for declarations against the current Annex I that name the consolidated version they checked and state concentrations against each limit, not a general “REACH compliant” or “RoHS compliant” statement.
  3. Test where the risk is high, such as recycled plastics, cable and new or low-cost sources, using a laboratory that can measure down to the relevant limit.
  4. Record every exemption relied on, with its Annex I entry and end date.
  5. Track the scheduled step-downs, such as May 17, 2027, for recovered material in toys, August 4, 2027, for UV-328 and April 15, 2028, for Dechlorane Plus.
  6. Refresh declarations whenever Annex I is amended, and check stock and spare parts against the new dates.

Example: applying the POPs Regulation to a corded lamp

 

Consider a composite business that imports corded floor lamps into the EU, with a body molded from recycled black plastic and a PVC power cable. As the importer, it places the lamps on the market and answers for every listed substance in them.

 

The lamp is electrical equipment within the scope of RoHS, so the PBDE entries’ carve-out applies and PBDEs are handled under RoHS instead. Every other POP still applies. The recycled plastic could carry HBCDD or UV-328, so the business asks its molder for concentrations against those limits and plans for UV-328’s drop to 10 mg/kg on August 4, 2027.

 

The cable is the bigger question. Chlorinated paraffins are common in PVC, and SCCPs must stay below 0.15% in the cable. MCCPs are not yet in Annex I, but they are listed under the Stockholm Convention and the Commission has adopted a delegated act that has not yet taken effect, so the business asks its cable supplier now which paraffins it uses. If the wire coating contains Dechlorane Plus, today’s 1,000 mg/kg limit becomes 1 mg/kg after April 15, 2028, and the Dechlorane Plus spare-part exemptions cover named sectors such as vehicles and medical devices, not household lamp cords.

Frequently asked questions

Does the EU POPs Regulation apply to imported products?

Yes. Importing into the EU counts as placing on the market, so the importer must make sure listed substances in the goods stay below the Annex I limits.

Is the POPs Regulation part of REACH?

No. It is a separate regulation with its own lists, although it uses REACH’s definitions of an article and of placing on the market.

What is an unintentional trace contaminant under the POPs Regulation?

It is a listed substance present below the limit set in its Annex I entry, a level at which the ban does not apply. The exemption covers contamination, not deliberate use at low levels.

Can recycled plastic contain POPs?

Only within set limits. Mixtures and articles made with recovered material may contain up to 350 mg/kg of PBDEs combined, falling to 200 mg/kg from December 30, 2027, and to 10 mg/kg for toys and childcare articles from May 17, 2027.

Are MCCPs banned under the EU POPs Regulation?

Not yet. MCCPs were listed under the Stockholm Convention in May 2025, but they were not in Annex I as of September 30, 2026, and the Commission’s delegated act, adopted in September 2026, had not yet taken effect.

Notes and sources

 

  1. Regulation (EU) 2019/1021 (POPs Regulation), particularly Articles 2, 4(2), 5(2), 14, 15, 18 and 19; Article 3(1) and Annex I; Article 3(2) and Annex II; Annex I, Part A, entries for tetra-, penta-, hexa-, hepta- and decabromodiphenyl ether, as amended by Commission Delegated Regulation (EU) 2025/1482; Article 4(1) and Annex I, Part A, fourth column of each entry; Article 7 and Annexes IV and V.
  2. Regulation (EC) No 1907/2006 (REACH), particularly Article 3.
  3. consolidated text as of September 30, 2026, Annex I, Part A, entries for decabromodiphenyl ether and hexabromocyclododecane.
  4. Stockholm Convention, decisions SC-12/9, SC-12/10 and SC-12/12
  5. Commission Delegated Regulation (EU) 2025/843 (UV-328)
  6. Commission Delegated Regulation (EU) 2025/1930 (Dechlorane Plus)
  7. Regulation (EU) 2025/2457
  8. Commission Delegated Regulation (EU) 2026/1423 (chlorpyrifos)
  9. Draft Commission Delegated Regulation amending Regulation (EU) 2019/1021 as regards medium-chain chlorinated paraffins, Ares(2025)10131503

 

Additional sources:

 

 

This article reflects Michelle Ng’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today