Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

PFAS regulations for products: the US and EU rules in one place

PFAS regulations for products in the US and EU, sorted by what binds today, what has a date and what is only proposed, and what each requires.
A card titled PFAS Rule Dates listing five EU and US PFAS dates from August 2026 to August 2030, with December 16, 2026 marked as the deadline, on an indigo gradient background.
November 18, 2026

Michelle NgMichelle NgSenior Regulatory Analyst

 

Rules on per- and polyfluoroalkyl substances (PFAS) in products are a patchwork, not one law. In the EU, the POPs Regulation, REACH restrictions and the packaging rules already limit PFAS, and the toy rules will from 2030, while a ban on the whole family is only proposed. In the US, the main duties come from an EPA reporting rule and state bans.

 

Key points

 

  • There is no single PFAS law: Bans, restrictions, reporting rules and packaging limits each cover different substances, products and dates.
  • “PFOS and PFOA free” is not the same as PFAS free: Rules define PFAS differently, from a short named list to any substance with one fully fluorinated carbon, so one supplier statement rarely covers them all.
  • Binding EU limits mostly target named PFAS groups: PFOS, PFOA, PFHxS, long-chain acids and PFHxA are limited in products today, and all PFAS in food contact packaging since August 12, 2026.
  • The EU’s broad restriction is still a proposal: It is not law, and the current rules apply until something is adopted.
  • In the US, states set most product bans: Federal law adds a one-time EPA report that covers PFAS in imported goods, with a window opening no later than January 31, 2027.

What are PFAS, and why do PFAS rules reach finished products?

 

PFAS are a family of thousands of man-made chemicals built on carbon-fluorine bonds, which are among the strongest in chemistry. That strength makes them repel water, oil and stains, and it also makes them last for decades in the environment.

 

They end up in products in three ways: as finishes and coatings (water-repellent fabric, nonstick pans, grease-resistant paper), as materials in their own right (fluoropolymers such as PTFE in seals, gaskets, cables and tubing), and as lubricants or processing aids that can leave traces behind. One product can contain all three, which is how a single item falls under several rules at once. PFAS sit within the wider group of restricted substances rules that apply to finished products.

 

Consider a small kitchen appliance with a nonstick heating plate, a PTFE gasket, a fluorinated lubricant in its motor and a grease-resistant paper insert in the box. Each part can fall under a different rule, with its own list of substances and its own date.

Is there one PFAS law for products?

 

No. Neither the EU nor the US has one law covering all PFAS in all products, so a manufacturer’s first job is sorting the rules by what each asks of a product. The useful split is between what binds today, what has a fixed future date and what is only proposed.

 

The table below sorts the main rules that way.

 

Rule Market What it asks of a product maker Status as of November 2026
POPs Regulation: PFOS, PFOA, PFHxS EU Don’t sell products containing them above trace limits Applies
POPs Regulation: long-chain PFCAs (C9 to C21) EU The same, for long-chain acids and related compounds Published November 12, 2026; applies from December 16, 2026
REACH Annex XVII, entry 68 EU Limits C9 to C14 PFCAs in products Applies
REACH Annex XVII, entry 79 (PFHxA) EU Limits PFHxA in consumer clothing, footwear, food contact paper, consumer mixtures and cosmetics Listed uses since October 10, 2026; other uses on dates from April 10, 2026, to October 10, 2029
PPWR, Article 5(5) EU No food contact packaging above PFAS limits Applies since August 12, 2026
Toy Safety Regulation EU No intentional use of PFAS in toys In force; applies from August 1, 2030
Universal PFAS restriction EU Would restrict most PFAS uses Proposal under review by ECHA’s committees
TSCA section 8(a)(7) US One-time report of PFAS made or imported since 2011, including in articles Reporting window opens by January 31, 2027
State PFAS laws US states Bans in named categories, reporting, labels Vary by state

What PFAS rules apply to products in the EU?

 

Four sets of binding EU rules reach finished products: the POPs Regulation, restrictions under REACH, the packaging regulation and, from 2030, the toy rules.

 

POPs Regulation: Regulation (EU) 2019/1021 on persistent organic pollutants bans making, selling and using listed substances, whether on their own, in mixtures or in articles (finished goods).[1] PFOS, PFOA and PFHxS are listed with their salts and related compounds, and a product may contain them only as an unintentional trace below set limits, 0.025 mg/kg for each acid and its salts and 1 mg/kg for related compounds.[1] On November 12, 2026, the EU published a further listing for long-chain perfluorocarboxylic acids (C9 to C21), which applies from December 16, 2026.[1]

 

REACH restrictions: REACH, Regulation (EC) No 1907/2006, restricts substances through entries in its Annex XVII. Where a product is electrical, REACH vs RoHS shows which of the two applies. Entry 68 already limits C9 to C14 acids in products.[2] Entry 79 restricts PFHxA, and since October 10, 2026, consumer clothing and accessories, consumer footwear, food contact paper and cardboard, mixtures sold to the public and cosmetics can’t contain 25 parts per billion (ppb) or more of PFHxA and its salts, or 1,000 ppb or more of related substances.[3] Other uses have their own dates, the first on April 10, 2026, for some firefighting foams and the last in October 2029,[3] and a separate entry phases out PFAS in firefighting foams.[4]

 

Packaging: Since August 12, 2026, the Packaging and Packaging Waste Regulation (PPWR), Regulation (EU) 2025/40, has barred food contact packaging that contains PFAS at or above 25 ppb for any single PFAS, 250 ppb for the sum measured by targeted analysis, or 50 parts per million for all PFAS, polymers included.[5] The limits cover food contact packaging, not all packaging.

 

Toys: The Toy Safety Regulation, Regulation (EU) 2025/2509, entered into force on January 1, 2026, and bans the intentional use of PFAS in toys. It applies from August 1, 2030, and the current toy rules apply until then.[6, 7]

What is the EU universal PFAS restriction?

 

It is a proposal, not law. In January 2023, authorities in Denmark, Germany, the Netherlands, Norway and Sweden proposed restricting nearly all PFAS under REACH, with time-limited exceptions for some uses.

 

The European Chemicals Agency’s (ECHA) risk assessment committee adopted its opinion on March 2, 2026, and its socio-economic committee consulted on a draft opinion until May 25, 2026, with a final opinion expected by the end of 2026.[8] The European Commission then drafts a restriction for EU countries to vote on, so any product duties from it are still ahead and today’s rules apply in the meantime.

What PFAS rules apply to products in the US?

 

There is no federal ban on PFAS in products. Federal law adds a reporting duty and controls on new uses, the Food and Drug Administration (FDA) handles food contact, and the bans that reach finished products are mostly state laws.

 

TSCA reporting: Under section 8(a)(7) of the Toxic Substances Control Act (TSCA), any business that manufactured or imported PFAS in any year since January 1, 2011, must file a one-time report with the Environmental Protection Agency (EPA), and the rule as written includes PFAS imported inside articles.[9] On April 13, 2026, EPA moved the start of the six-month reporting window to January 31, 2027, or 60 days after a forthcoming rule on the reporting requirements takes effect, whichever is earlier; small businesses reporting only as article importers get twelve months.[9] In November 2025, EPA proposed exemptions, including for article importers, but they were still only proposed as of November 2026.[10]

 

New use rules: EPA’s significant new use rules require 90 days’ notice before certain PFAS uses start or restart. One matters to importers: since 2020, importing an article with certain long-chain PFAS in a surface coating has counted as a significant new use.[11]

 

Food contact: In February 2024, the FDA said PFAS grease-proofing agents for paper food packaging were no longer being sold into the US market, and in January 2025 it found that 35 authorizations for them were no longer effective.[12] Other authorized food contact uses, such as nonstick coatings and gaskets, remain.

 

State laws: State PFAS laws set most product bans, reporting duties and labels, each on its own dates. Minnesota, for example, has banned intentionally added PFAS in 11 product categories since January 1, 2025, and bans them in all products from January 1, 2032, unless the state has ruled a use “currently unavoidable.”[13] Other states, Maine among them, have their own categories and dates.

 

Drinking water limits and Superfund designations for PFOA and PFOS govern water systems and contaminated sites, not product content.

Why do PFAS definitions differ between rules?

 

Each rule defines PFAS its own way, so a product can meet one rule and still be in scope of another. A supplier statement that a material is “PFOS and PFOA free” covers two substances out of thousands.

 

The table shows how the main definitions compare.

 

Rule What counts as PFAS
POPs Regulation; REACH entries 68 and 79 Named substances, their salts and related compounds
PPWR; Toy Safety Regulation; EU universal proposal Any substance with at least one fully fluorinated methyl (CF3-) or methylene (-CF2-) carbon atom
TSCA section 8(a)(7) Any substance containing one of three specified fluorinated structures
Minnesota statute Any fluorinated organic chemical with at least one fully fluorinated carbon atom

 

The broad definitions catch fluoropolymers such as PTFE, which many teams don’t think of as PFAS at all. The named lists don’t, which is why a gasket can pass a POPs check and still count under the PPWR or a state ban.

What do manufacturers and importers have to do?

 

The duties come down to five kinds of work, and which ones apply depends on the rule and the market:

 

  • Know what is in the product: Limits apply to parts and materials (per homogeneous material under REACH), so content has to be known at that level.
  • Get supplier declarations: Most PFAS arrives in purchased materials, so declarations carry the evidence, and they need to name the substances or the definition each rule uses.
  • Stop selling: Where a ban applies, the product can’t be placed on the market after its date, though the POPs Regulation lets articles already in use stay in use.[1]
  • Report: TSCA and some states require reports on PFAS content, including in imported goods.
  • Label or disclose: Some state laws require a label or disclosure in place of, or before, a ban.

 

Retailers’ and customers’ own PFAS policies often arrive before any law does, and they tend to use the broadest definition. The rules set the legal floor, and a contract may ask for more. Keeping the map of rules, products and markets current is the part that slips, since listings and dates keep moving, and Daptic tracks regulatory changes across jurisdictions, flags the ones that affect a company’s products and works out which requirements apply to each product in each market.

Which PFAS rules apply to textiles, packaging, electronics and other products?

 

The general rules above reach every product; a few rules also name specific categories:

 

  • Textiles and apparel: EU PFHxA limits have applied to consumer clothing, accessories and footwear since October 10, 2026, alongside the POPs limits. Several US states ban PFAS in textiles or textile furnishings, Minnesota among them.
  • Packaging: EU food contact packaging has had to meet the PPWR limits since August 12, 2026, and food contact paper also falls under the PFHxA restriction. In the US, the FDA position on grease-proofing agents applies and state laws may add bans.
  • Electrical and electronic equipment, radio included: No EU rule, including RoHS, names PFAS in electronics specifically, so the POPs listings and the pending proposal are what matter. TSCA reporting covers imported equipment containing PFAS, and Minnesota’s 2025 bans exclude PFAS used only in electronic or internal components.
  • Children’s products and toys: The EU bans intentional PFAS in toys from August 1, 2030. Minnesota’s 2025 list includes juvenile products.
  • Cosmetics: EU PFHxA limits have applied since October 10, 2026; in the US, the bans are state laws, including Minnesota’s.
  • Furniture and cookware: In the EU, only the POPs limits and the pending proposal apply. Minnesota has banned intentionally added PFAS in cookware and upholstered furniture since January 1, 2025.
  • Machinery and industrial equipment: Rarely named, but fluoropolymer seals, hoses and lubricants fall under the POPs limits, TSCA reporting and broad state bans such as Minnesota’s from 2032.

How should a manufacturer start on PFAS compliance?

 

Start with the product, not the law, and work outward:

 

  1. Inventory: List where PFAS could be in each product: coatings, finishes, fluoropolymer parts, lubricants and packaging.
  2. Supplier data: Ask suppliers to declare against the broadest definition that applies, with substance identifiers, not only “PFOS and PFOA free.”
  3. Map to markets: Match each part to the rules in each market where the product sells, with each rule’s date.
  4. Watch list: Track dated rules and open proposals, such as the EU universal restriction, the TSCA exemptions and new state categories.

 

As an example of applying this to a product, take a water-repellent rain jacket made in Asia and sold online in the EU and several US states. Its outer fabric has a water-repellent finish, its seams are taped with a fluoropolymer membrane, and it ships in a plastic bag.

 

In the EU, the jacket is consumer clothing, so since October 10, 2026, its finish has had to stay under the PFHxA limits. Short-chain fluorinated finishes, the usual replacement for older long-chain ones, are what that limit targets, so a “PFOS and PFOA free” statement says little about it. The POPs limits apply too, including the long-chain acids from December 16, 2026. The PPWR limits don’t, because the bag isn’t food contact packaging.

 

In the US, if the business imported jackets containing PFAS since 2011, it may have to report under TSCA unless EPA finalizes the article importer exemption. Apparel isn’t on Minnesota’s 2025 list, but the 2032 ban would reach both the finish and the membrane unless their use is ruled currently unavoidable. The membrane is the harder part: it sits outside the PFHxA limits but inside every broad definition.

Frequently asked questions

What are PFAS regulations for products?

They are separate rules, not one law: EU limits on named PFAS under the POPs Regulation and REACH, limits for food contact packaging and toys, a US federal reporting rule and US state bans. Each covers different substances, products and dates.

Is there a PFAS ban in the EU?

Not for all PFAS. The EU limits named PFAS groups in products, all PFAS in food contact packaging and, from August 1, 2030, intentional PFAS in toys, while a ban on most PFAS is still only proposed.

Does “PFOS and PFOA free” mean a product is PFAS free?

No. PFOS and PFOA are two substances in a family of thousands, and rules such as the PPWR and Minnesota’s statute cover any substance with a fully fluorinated carbon.

Do importers of finished products have to report PFAS to EPA?

Yes, under the current TSCA section 8(a)(7) rule, which covers PFAS imported in articles and opens reporting no later than January 31, 2027. EPA has proposed an exemption for article importers, but it was not final as of November 2026.

Are fluoropolymers like PTFE regulated as PFAS?

Only under rules with broad definitions. They fall within the PPWR, TSCA and Minnesota definitions but outside the named-substance lists of the POPs Regulation and REACH entries 68 and 79.

Notes and sources

 

  1. Regulation (EU) 2019/1021 (POPs Regulation), particularly Articles 3 and 4 and Annex I, Part A, entries for PFOS, PFOA and PFHxS, as amended by Commission Delegated Regulations (EU) 2020/784, 2023/1608 and 2025/718; Part A, of Regulation (EU) 2019/1021 for long-chain perfluorocarboxylic acids.
  2. Regulation (EC) No 1907/2006 (REACH), particularly Annex XVII, entry 68, added by Commission Regulation (EU) 2021/1297.
  3. Commission Regulation (EU) 2024/2462 (PFHxA, REACH entry 79), particularly Annex (REACH Annex XVII, entry 79), paragraph 1, and for the other uses and dates, the entry’s other paragraphs.
  4. Commission Regulation (EU) 2025/1988 (PFAS in firefighting foams, REACH entry 82)
  5. Regulation (EU) 2025/40 (PPWR) and the European Commission’s packaging waste page, particularly Articles 3 and 5(5).
  6. Regulation (EU) 2025/2509 (Toy Safety Regulation) and the European Commission’s toy safety page, particularly Annex II, Part III.
  7. dates of entry into force and application as stated on the European Commission’s toy safety page.
  8. ECHA: Socio-Economic Analysis Committee agrees its draft opinion on PFAS restriction proposal
  9. 40 CFR Part 705 (eCFR), particularly sections 705.3 and 705.20, as revised by EPA’s final rule of April 13, 2026, 91 FR 18786.
  10. EPA proposed rule, “PFAS Data Reporting and Recordkeeping Under TSCA,” Federal Register, November 13, 2025 (FR Doc. 2025-19882).
  11. 40 CFR 721.10536 (eCFR) and EPA final rule of July 27, 2020, particularly § 721.10536.
  12. FDA: Authorized Uses of PFAS in Food Contact Applications
  13. Minnesota Statutes, section 116.943, particularly section 116.943, subdivisions 1 and 5.

 

Additional sources:

 

 

This article reflects Michelle Ng’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today