REACH vs RoHS: the difference, and which one applies to your product

Marc HaddadForward Deployed Regulatory Engineer
REACH and RoHS are two separate EU laws. REACH, Regulation (EC) No 1907/2006, governs chemicals in almost every physical product sold in the EU, while the RoHS Directive 2011/65/EU restricts ten substances in electrical and electronic equipment. Most electronic products have to meet both, and every product has REACH duties to check.
Key points
- REACH reaches every physical product, because it covers substances on their own, in mixtures and inside finished articles. RoHS covers only electrical and electronic equipment that no exclusion takes out.
- You don’t choose between them: an electrical or electronic product sold in the EU almost always has to meet both.
- RoHS is a CE marking law with a declaration of conformity, while REACH duties for finished products are mostly information passed along the supply chain.
- The 0.1% limits are measured against different things: RoHS against each homogeneous material, REACH against each article, including every article inside an assembled product.
What is the difference between REACH and RoHS?
REACH regulates chemicals wherever they end up, and RoHS regulates one family of products. Because they start from opposite ends, they ask manufacturers for different things. Both sit inside the wider set of restricted substances rules for finished products.
REACH, the Regulation on the Registration, Evaluation, Authorisation and Restriction of Chemicals, applies directly in every member state and follows substances through the supply chain: who makes or imports them, in what volumes, and whether they are restricted or of very high concern. RoHS, the Restriction of Hazardous Substances Directive, is transposed into national law and works like other CE marking laws, where the manufacturer assesses the product, signs a declaration of conformity and marks it.
Does RoHS apply to my product?
RoHS applies if your product is electrical and electronic equipment (EEE) and no exclusion fits. Since July 22, 2019, the directive has had an open scope, so any product with a power input or a circuit board starts out in scope.[1]
EEE is equipment that depends on electric currents or electromagnetic fields to work properly and is designed for use at no more than 1,000 volts AC or 1,500 volts DC. “Dependent” means it needs electricity for at least one intended function, so a mainly mechanical product with one powered feature counts.[1]
The exclusions cover military and space equipment, large-scale stationary industrial tools, large-scale fixed installations, means of transport (except electric two-wheel vehicles that are not type-approved), non-road mobile machinery made available only for professional use, active implantable medical devices, photovoltaic panels in professionally installed permanent systems, business-to-business research and development equipment, and equipment designed to be installed in excluded equipment.[1] By product category:
- Electrical and electronic, radio included: in scope unless an exclusion fits.
- Children’s products and toys: an electric or electronic toy is EEE and needs RoHS on top of toy safety rules, while a toy with no electrical function is outside RoHS.
- Machinery: most powered machinery is EEE. The large-scale exclusions need equipment that is both large-scale and installed and removed by professionals, so test each condition rather than assuming an industrial machine is out.
- Vehicles: cars, trucks and other means of transport are excluded.
- Everything else: furniture, textiles and unpowered tools sit outside RoHS.
Does REACH apply to finished products?
Yes. REACH covers substances on their own, in mixtures and in articles, so every physical product placed on the EU market raises REACH questions, electronic or not.
It sorts the bill of materials (BOM) into three boxes.[2] A substance is a chemical element or compound, such as copper or a solvent. A mixture is a blend of substances, such as a paint, an adhesive or a grease. An article is an object whose shape, surface or design determines its function more than its chemistry does, such as a housing, a cable or a circuit board.
For makers and importers of finished products, four duties matter:
- Candidate List substances: substances of very high concern (SVHCs) on the European Chemicals Agency’s (ECHA’s) Candidate List trigger duties above 0.1% weight by weight in an article. Any supplier must give business customers at least the substance name and answer a consumer’s request free of charge within 45 days, and a producer or importer must notify ECHA above one tonne a year across its articles, unless an exception applies.[2]
- Restrictions: the restrictions in REACH Annex XVII apply to substances inside articles, not only to chemicals sold as such.[2]
- Registration: a substance intended to be released in use, such as a fragrance, must be registered above one tonne a year per producer or importer.[2]
- Authorization: substances in Annex XIV cannot be used in the EU without authorization, which binds EU manufacturing steps rather than the import of finished articles.[2]
The 0.1% is not measured over the whole product. On September 10, 2015, the Court of Justice of the EU ruled in Case C-106/14 that each article built into a complex product remains an article, so the threshold applies to each one.[3] Since January 5, 2021, the same Candidate List information has also had to go to ECHA’s SCIP database under the Waste Framework Directive.[4]
What do REACH and RoHS require?
RoHS asks for a conformity assessment and a CE mark, while REACH asks you to know what is in each article and pass that on. The table compares the two for a maker or importer of finished products.
| RoHS (Directive 2011/65/EU) | REACH (Regulation (EC) No 1907/2006) | |
|---|---|---|
| Legal form | Directive, transposed into national law | Regulation, applies directly |
| Products covered | Electrical and electronic equipment not excluded by Article 2(4) | Substances, mixtures and articles: in practice, every product |
| Substances | Ten, listed in Annex II | Candidate List SVHCs, Annex XVII restrictions, Annex XIV authorization list |
| Threshold measured against | Each homogeneous material | Each article, for Candidate List duties; each Annex XVII entry sets its own basis |
| Core duty | Don’t place equipment above the limits on the market unless an exemption applies | Meet restrictions, pass on Candidate List information, register substances intended to be released |
| Paperwork | Technical documentation, EU declaration of conformity, CE marking | Information to customers and consumers, SCIP notification, ECHA notification above one tonne a year |
| Exemptions | Time-limited and application-specific, in Annexes III and IV | No general list; restriction entries carry their own derogations |
| Who acts | Manufacturer, authorized representative, importer, distributor | Producer and importer of articles; every supplier of an article for Candidate List information |
RoHS limits lead, mercury, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers and four phthalates (DEHP, BBP, DBP and DIBP) to 0.1%, and cadmium to 0.01%.[1] The four phthalates were added in 2015.[5] Each limit applies to every homogeneous material, meaning one that cannot be mechanically separated, such as a plating layer or a cable’s insulation.[1]
The manufacturer runs internal production control, keeps technical documentation, signs an EU declaration of conformity and affixes the CE marking.[1] Most build the file to EN IEC 63000:2018, a harmonized standard whose reference the Commission published in 2020.[6] It is a standard, not the law: it says how to organize the evidence, and the limits still come from the directive.
Who is responsible for REACH and RoHS compliance?
Under RoHS one company signs for the product, while REACH spreads duties along the supply chain. That difference decides who in your company owns each file.
RoHS gives the main duties to the manufacturer, meaning whoever markets the product under its own name, so a brand selling a contract-manufactured device is the manufacturer.[1] The importer of a non-EU product checks that the conformity assessment, documentation and marking are in place, a distributor checks the marking and documents, and an authorized representative can take on some tasks under a written mandate.
REACH puts registration and ECHA notification on the producer or importer of the article, and the Candidate List information duty on every supplier of an article, distributors and retailers included.[2] A non-EU producer’s registration and notification duties fall on its EU importer, unless the producer appoints an only representative in the EU.[2]
Does my product need REACH, RoHS or both?
Assume REACH always applies, then test whether RoHS applies too. Working from the BOM makes both questions concrete:
- Start with REACH: every product is made of substances, mixtures or articles.
- Ask whether the product is EEE: if it needs electricity for any intended function within the voltage limits, it is in RoHS unless an exclusion fits.
- Test each exclusion against its exact words: an exclusion that fits takes the product out of RoHS only, and REACH still applies in full.
- Split the BOM two ways: list each article for REACH (housing, cable, board, fastener) and each homogeneous material for RoHS (resin, insulation, plating, solder).
Is a RoHS-compliant product also REACH compliant?
No. A RoHS declaration answers for ten substances under one law, and the places where the two meet are where products get caught:
- A RoHS exemption is not a REACH exemption: Annexes III and IV let a restricted substance stay in specific applications, but if that substance is on the Candidate List above 0.1% of the article, the REACH information duties still apply.[1]
- A clean RoHS test report says nothing about most SVHCs: screening for the ten RoHS substances does not find the many Candidate List substances RoHS does not restrict.
- The evidence looks different: RoHS evidence is a technical file behind a signed declaration, while REACH evidence is a trail of supplier declarations, customer communications and SCIP notifications, with no declaration of conformity and no CE marking.
How do REACH and RoHS change over time?
They change on separate timelines through different procedures, so tracking one does not cover the other.
ECHA adds substances to the Candidate List in periodic updates, and the information duties apply from the day a substance is listed, with ECHA notification due six months later.[2] RoHS has listed the same ten substances since 2015, but its exemptions are renewed, narrowed or revoked by delegated acts with their own expiry dates. A product that has not changed can still fall out of line with either list, and Daptic tracks regulatory changes across jurisdictions and flags the ones that affect your products, such as a new Candidate List entry or an expiring RoHS exemption.
On December 10, 2025, the Commission proposed repealing the SCIP notification duty as part of an environmental omnibus. As of November 2026, the proposal was still awaiting a vote in Parliament’s environment committee, so SCIP notifications are still required.
On December 12, 2025, Directive (EU) 2025/2456 was published. After a transition period it moves the scientific and technical assessment of RoHS exemptions and restriction reviews to ECHA, while the Commission still decides and the limits stay the same.[7]
On April 27, 2026, the environment Commissioner told Parliament’s environment committee that the Commission would not open REACH at this point, so the revision planned for late 2025 has not been proposed.
Example: applying REACH and RoHS to a connected device
As an example of applying this to a product, take a composite case: an EU brand imports a Wi-Fi indoor air quality monitor from a contract manufacturer in Asia and sells it to consumers. The BOM is a molded housing, a circuit board assembly, a sensor module, a USB power cable and silicone feet.
RoHS applies, because the monitor needs electricity and no exclusion fits. The brand sells it under its own name, so it is both manufacturer and importer. Its technical file, built to EN IEC 63000:2018, holds supplier declarations for each part, test reports for higher-risk materials such as solder and the cable’s PVC jacket, any exemptions relied on, and the signed EU declaration of conformity behind the CE marking.
REACH applies to every article in the BOM. The cable supplier declares a Candidate List plasticizer that RoHS does not restrict, at 0.4% of the cable’s weight and about 0.02% of the whole monitor. Because the cable is its own article, the brand must name the substance to its retailers, answer consumer requests within 45 days and submit a SCIP notification. Its volume of that substance stays far below one tonne a year, so no ECHA notification is due. The REACH file is the dated supplier declarations, the retailer communications and the SCIP reference.
What should manufacturers do next?
Three steps cover most of the work:
- Map each product to scope: record whether it is EEE, any RoHS exclusion you rely on, and that REACH applies regardless.
- Collect evidence by part and material: ask suppliers for RoHS declarations by homogeneous material and dated Candidate List declarations by article, and test where the risk is highest.
- Monitor both lists: recheck declarations after each Candidate List update and before any RoHS exemption you rely on expires.
The RoHS substances and exemptions, and the Candidate List and SCIP, each get their own guide.
Frequently asked questions
Is REACH the same as RoHS?
No. REACH is an EU regulation on chemicals in almost every product, and RoHS is an EU directive restricting ten substances in electrical and electronic equipment.
Does REACH apply to electronics?
Yes. Electronic products are articles under REACH, so Candidate List duties and Annex XVII restrictions apply on top of RoHS.
Does RoHS apply to products without electronics?
No. RoHS covers only equipment that needs electricity for at least one intended function, so non-electrical products answer to REACH alone.
Does REACH require CE marking?
No. The CE marking and declaration of conformity come from RoHS, while REACH duties for finished products are information to customers, consumers and ECHA.
Is the 0.1% SVHC threshold measured on the whole product?
No. The Court of Justice ruled in Case C-106/14 that it applies to each article in an assembled product.
Does RoHS apply to cars?
No. Means of transport are excluded from RoHS, except electric two-wheel vehicles that are not type-approved, but vehicles and their parts are still covered by REACH.
Notes and sources
- Directive 2011/65/EU (RoHS), particularly Articles 2(4), 3, 4(2) and 7; Article 4(3) and Annex I, category 11; Article 4(1) and Annex II; Article 3(6) and Articles 8 to 10; Article 5 and Annexes III and IV.
- Regulation (EC) No 1907/2006 (REACH), consolidated text, particularly Articles 3(33), 7, 8, 33 and 59; Article 3(1) to (3); Article 67(1) and Annex XVII; Article 56(1) and Annex XIV.
- Court of Justice of the EU, Case C-106/14, FCD and FMB
- Directive 2008/98/EC (Waste Framework Directive), particularly Article 9(1)(i).
- Commission Delegated Directive (EU) 2015/863
- Commission Implementing Decision (EU) 2020/659
- Directive (EU) 2025/2456
Additional sources:
- Directive (EU) 2018/851
- Commission proposal COM(2025) 986 (environmental omnibus)
- European Parliament, procedure file 2025/0394(COD))
- European Parliament Legislative Train, revision of REACH
- European Parliament Legislative Train, revision of RoHS
- European Commission, RoHS Directive
- ECHA, Candidate List of substances of very high concern
This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.



