Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

REACH SVHCs and the SCIP database: what article suppliers have to tell customers

REACH SVHC rules explained: when an article holds a Candidate List substance above 0.1%, what you owe customers, consumers and the SCIP database.
A product card for a countertop food mixer over two component cards: a power cord over the 0.1% Candidate List threshold and a motor bracket below it.
November 12, 2026

Marc HaddadMarc HaddadForward Deployed Regulatory Engineer

 

If you supply a product on the EU market and any part of it contains a substance of very high concern (SVHC) from the REACH Candidate List above 0.1% by weight, you have to pass information to your business customers, answer consumers who ask, and notify the SCIP database run by the European Chemicals Agency (ECHA). None of these duties has a tonnage threshold.

 

Key points

 

  • The trigger: a Candidate List substance above 0.1% weight by weight (w/w) in an article. It switches on REACH Article 33 (information to customers, and to consumers on request) and the SCIP notification under EU waste law.
  • Each component counts: the 0.1% is measured against each component article, not the finished product, so one power cord or seal can bring the whole product into scope.
  • Three separate duties: Article 33, SCIP and the Article 7(2) notification have different legal bases, recipients and timing, and meeting one does not discharge the others.
  • Not a ban: being on the Candidate List is not a ban but an information duty that applies from the day the substance is listed.
  • Non-EU manufacturers: you don’t hold these duties directly, but the EU importer can’t meet them without your component-level data.

What counts as an article under REACH?

 

An article is a manufactured object whose shape matters more than its chemistry. If you make chairs, power tools, toys or laptops, you supply articles, and the duties described here are written for you.

 

REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals), Regulation (EC) No 1907/2006, sorts chemistry into three boxes:

 

  • Substance: a chemical element or compound, such as a plasticiser.[1]
  • Mixture: a blend of substances, such as a paint or a grease.[1]
  • Article: an object given “a special shape, surface or design” during production that matters more to its function than its chemical composition does, such as a cable, a bracket or a seat cushion.[1]

 

Suppliers of substances and mixtures pass information on through safety data sheets,[1] while suppliers of articles have the lighter regime described here.

What is a substance of very high concern (SVHC)?

 

An SVHC is a substance that meets one of the criteria in Article 57 of REACH. In plain terms, it is a chemical that is hazardous to health or builds up in the environment to a degree the law treats as serious.

 

The criteria are:

 

  • Cancer, genetic or reproductive harm: it can cause cancer, damage genetic material or harm reproduction (classification category 1A or 1B under CLP, the Classification, Labelling and Packaging Regulation (EC) No 1272/2008).
  • Persistent and bioaccumulative: it is persistent, bioaccumulative and toxic, or very persistent and very bioaccumulative.[1]
  • Equivalent concern: it raises an equivalent level of concern, such as an endocrine disruptor, identified case by case.[1]

What is the SVHC Candidate List?

 

The Candidate List is the official list of substances formally identified as SVHCs.[1] Your duties as an article supplier attach to this list, not to the Article 57 criteria in the abstract.

 

A substance gets onto the list in steps. First a Member State, or ECHA at the Commission’s request, prepares a dossier,[1] and ECHA then publishes a notice and invites comments.[1] If comments come in, the Member State Committee must agree unanimously,[1] and failing that the Commission decides.[1] ECHA publishes the list on its website and updates it after each decision.[1]

 

Listing is not a ban: substances banned in finished products fall under the separate restricted substances rules. Instead, listing puts a substance in the queue for possible authorisation and switches on information duties for everyone who supplies articles containing it. The aim is to carry knowledge that is invisible on the outside of a product down the supply chain to the people who use it, repair it and eventually shred it.

What does REACH Article 33 require?

 

Article 33 requires every supplier of an article containing a Candidate List substance above 0.1% w/w to give its business customers enough information for safe use, at minimum the substance name. Consumers who ask must get the same information within 45 days, free of charge.

 

“Supplier of an article” covers the producer, importer, distributor or any other actor placing the article on the market.[1] The business customers, called “recipients”, are professional users and distributors,[1] while consumers are covered separately, on request.[1]

 

The duty applies from the day the substance is listed, and there is no tonnage threshold.

What is the SCIP database?

 

SCIP is the database ECHA runs under EU waste law, and since January 5, 2021, suppliers of articles above the 0.1% threshold have had to notify it. It carries the same information Article 33(1) requires.

 

The legal basis is the Waste Framework Directive 2008/98/EC, as transposed into each Member State’s law.[2] The duty falls on the same suppliers, defined by reference to REACH,[1] and Article 9 has no exemption for small volumes. ECHA opens the database to waste treatment operators and, on request, to consumers.[2]

 

Because SCIP is a waste-law duty owed to ECHA and enforced under national law, telling your customers does not cover it, and both are required.

What is the REACH Article 7(2) notification?

 

Article 7(2) is a third, narrower duty: producers and importers must notify ECHA when a Candidate List substance is above 0.1% w/w and over 1 tonne a year across their articles. It is the only one of the three with a tonnage condition.

 

The notification covers the substance’s identity, classification, uses and tonnage band,[1] and it is due six months after listing.[1] It does not apply where exposure can be excluded,[1] or where the substance is already registered for that use.[1]

How do Article 33, SCIP and Article 7(2) compare?

 

The table sets the three duties side by side: legal basis, trigger, who owes what to whom, and when.

 

Article 33 (REACH) SCIP (waste law) Article 7(2) (REACH)
Legal basis Regulation (EC) No 1907/2006, Article 33(1) and (2) Directive 2008/98/EC, Article 9(1)(i), as transposed into each Member State’s law Regulation (EC) No 1907/2006, Article 7(2)
Trigger Candidate List substance above 0.1% w/w in an article The same as Article 33(1) Candidate List substance above 0.1% w/w and over 1 tonne a year across the producer’s or importer’s articles
Who Every supplier of the article: producer, importer, distributor or other actor placing it on the market (Article 3(33)) The same suppliers, by reference to Article 3(33) Producers (only for articles they make or assemble) and importers
To whom Business recipients, meaning professional users and distributors (Article 3(35)); consumers on request (Article 33(2)) ECHA, which opens the database to waste treatment operators and, on request, to consumers (Article 9(2)) ECHA
What Enough information for safe use, at minimum the substance name The Article 33(1) information Identity, classification, uses and tonnage band (Article 7(4))
When From the day the substance is listed; consumers within 45 days, free of charge Since January 5, 2021 Six months after listing (Article 7(7))
Exemptions None for tonnage None in Article 9 Exposure can be excluded (Article 7(3)); substance already registered for that use (Article 7(6))

Does the 0.1% apply to the finished product or to each component?

 

To each component: in Case C-106/14, decided on September 10, 2015, the Court of Justice of the EU held that an object “does not cease to be an article” when it is assembled with others.[3]

 

This means a product that looks well under 0.1% overall can still be in scope, so an importer has to check every component article. If any one of them crosses the threshold, every supplier of the product owes Article 33 information, giving at least the substance name.

 

The Court drew one distinction that only helps EU assemblers: a producer’s Article 7(2) duty covers only the articles it makes or assembles itself, not components another EU producer made.[3] An importer has no such relief, because nobody upstream in the EU has notified anything.

How do you check whether your products contain SVHCs above 0.1%?

 

Work down your bill of materials (BOM), the parts list for the product, rather than across the Candidate List.

 

  1. Break the BOM down to articles: list every part that arrives as an object, such as cords, fasteners, gaskets, labels and foams. Bulk materials such as adhesives and greases that you apply on your own line are mixtures, and their supplier owes you a safety data sheet.
  2. Get substance data for each article: ask for declarations against a named, dated version of the Candidate List. A bare “REACH compliant” statement does not tell you which list was checked or how the percentage was calculated. Getting this from suppliers is covered in how to collect supplier compliance data.
  3. Calculate per article: divide the substance mass by the mass of that article, and expect small parts to cross 0.1% first.
  4. Map who receives what: note who imports into the EU, and which channels sell to businesses and which only to consumers, since that decides who owes Article 33(1) information and who owes answers on request.
  5. Watch what is coming: substances get a public consultation before they are listed,[1] so you can see a likely addition months ahead. Once one is listed, Article 33 applies to the next unit you ship. If you run this check across hundreds of part numbers, Daptic tracks Candidate List additions and other regulatory changes across jurisdictions and flags which of your products each new listing reaches, so the BOM check starts from the change.

How do SVHC duties apply to electronics, toys, machinery and imports?

 

The duties are the same for every type of article, but the number of component articles to check and the other rules that sit alongside them change by sector.

 

Electrical and electronic equipment: these are the densest complex objects you will see, with cables, connectors, populated boards and switches each a candidate article. A RoHS declaration answers a different question against a different measure and does not discharge Article 33.

 

Toys and children’s products: the Candidate List duties are the same as for any article, but toy law also bans substances outright. Regulation (EU) 2025/2509, adopted on November 26, 2025, will apply from August 1, 2030, and will repeal Directive 2009/48/EC from that date.[4] A ban and an information duty are separate tests, and passing one tells you nothing about the other.

 

Machinery and long-life equipment: duties attach when each article is supplied, not when it was designed, so a design from ten years ago picks up Article 33 duties for every unit shipped after a new listing. Spare parts do too, because they are articles supplied in their own right, including those sitting in your warehouse on the day of listing.

 

Non-EU manufacturers: the three duties sit on the EU importer and on every EU supplier after it, not on you directly. The importer cannot meet them without your component-level data, so the work comes back to you through the supply contract. If you also sell into California, a different warning regime applies, covered in Proposition 65.

When do new Candidate List substances take effect?

 

Article 33 and SCIP apply from the date a substance is added, and Article 7(2) applies six months later.[1] The Candidate List grows each time ECHA concludes the identification of a new substance.[1]

 

Supplier declarations go stale with every update, so ask for the list version each time you collect one.

Is the SCIP database being abolished?

 

Not yet. On December 10, 2025, the Commission published proposal COM(2025) 986, which would end new SCIP notifications from the date the amending directive enters into force while leaving Article 33 as it is.

 

As of November 10, 2026, the proposal is still awaiting a committee decision in the European Parliament, and no change to these duties has been adopted.

 

The legal texts themselves move slowly: the consolidated REACH text is current to June 22, 2026, and the consolidated Waste Framework Directive to October 16, 2025. Neither recent amendment changes Article 33 or the SCIP duty.[2] Treat ECHA’s guidance on articles and its SCIP format as guidance, not law, and check the version in force before relying on it.

Example: an SVHC in the power cord of an imported appliance

 

Here is how the checks play out on one product, and you can swap in your own parts, weights and volumes.

 

An EU brand imports a 4.5 kg countertop food mixer, about 100,000 units a year, and sells through retailers and a hotel-supply distributor. The power cord weighs 150 g, and its sheath contains a Candidate List phthalate at 2% of the cord, or 3 g.

 

  • Threshold: the 3 g is 0.067% of the mixer but 2% of the cord. Because the cord is the article that counts, the product is over the threshold.
  • Article 33: the importer owes Article 33(1) information to the retailers and the distributor, and owes answers to consumers within 45 days. The distributor owes the same information to its hotel customers.
  • SCIP: the importer must submit a SCIP notification.
  • Article 7(2): not triggered, because 3 g × 100,000 units is 0.3 tonnes a year, below 1 tonne, unless other imported articles with the same substance above 0.1% push the importer’s total over.

 

The finished-product figure would have said “clear”, while the component figure says three of the four questions come back yes.

Frequently asked questions

Is the SVHC Candidate List a list of banned substances?

No. Listing triggers information duties, while bans come through two separate lists: restrictions in Annex XVII and authorisation in Annex XIV.[1]

Does the 0.1% SVHC threshold apply to the whole product?

No. Following Case C-106/14, the 0.1% applies to each component article, so a single cord or seal over the threshold brings the whole product into scope.

If we inform our customers, do we still need a SCIP notification?

Yes. SCIP is a waste-law duty owed to ECHA and enforced under national law, so the customer notice and the SCIP notification are both required.

Does REACH Article 33 only apply above one tonne a year?

No. Article 33 has no tonnage threshold, and the 1 tonne a year condition belongs to the Article 7(2) notification alone.

How long do you have to answer a consumer’s SVHC request?

45 days. A consumer who asks must receive the information within 45 days, free of charge.[1]

Notes and sources

 

  1. REACH, Regulation (EC) No 1907/2006, consolidated text of June 22, 2026, Articles 3, 7, 31, 33, 56, 57, 59 and 67
  2. Waste Framework Directive 2008/98/EC, consolidated text of October 16, 2025, Article 9(1)(i) and 9(2)
  3. CJEU, Case C-106/14, FCD and FMB, September 10, 2015, particularly paragraph 53; paragraphs 55 to 61.
  4. Toy Safety Regulation (EU) 2025/2509, Articles 56, 57 and 59

 

Additional sources:

 

 

This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today