Automotive regulatory compliance: what parts suppliers have to prove, from type approval to IMDS

Michelle NgSenior Regulatory Analyst
Automotive regulatory compliance for a parts supplier means proving that a part meets the rules its customer’s vehicle must meet, plus the material and quality rules that follow the part itself. In the European Union (EU), that proof feeds an approval granted before sale; in the United States (US), makers certify their own compliance and the regulator enforces afterwards.
Key points
- The vehicle maker usually holds the approval: A supplier proves that its part meets the requirements the maker passes down, and only some parts carry an approval of their own.
- The EU approves before sale, the US checks afterwards: EU type approval comes before a vehicle or approved component is sold, while US manufacturers certify themselves against federal safety standards.
- IMDS is not a law: The International Material Data System is an industry database that vehicle makers use to meet legal duties on substances and recycling.
- EU material rules are changing: The new End-of-Life Vehicles Regulation applies from September 1, 2028, with recycled plastic and substance requirements for vehicle types approved from September 1, 2032.
- The customer’s supplier manual sets most of the workload: Quality certification, functional safety and cybersecurity processes are usually contract requirements layered on top of the law.
Who is responsible for automotive compliance: the vehicle maker or the parts supplier?
The vehicle maker holds legal responsibility for the whole vehicle, and a supplier’s job is mostly to prove that its part lets the maker meet it. That proof travels by contract: drawings, specifications, test reports and declarations the maker relies on when it seeks approval or certifies compliance.
A common misconception is that every automotive part needs its own government approval. Most don’t. A seat frame, a wiring harness or a bracket is covered, if at all, through the vehicle’s approval, and the supplier’s obligations come from the customer’s purchase terms and supplier manual. Working out which regulations apply to a part starts with whether it has an approval of its own.
Some parts are different. Lamps, tires and brake linings, among others, can be approved on their own, and then the supplier is the legal manufacturer of an approved component, with duties of its own.
Consider a supplier that builds a headlamp to a vehicle maker’s design. The lamp carries its own approval, so the supplier applied for it and answers for keeping production in line with it. The bracket the lamp sits on has no approval at all, and the supplier’s duty there is simply to meet the maker’s drawing.
How does vehicle type approval work in the EU?
In the EU, vehicles, and the systems and components that need approval, must be approved by a national approval authority before they are sold. Regulation (EU) 2018/858 sets this framework, which has applied since September 1, 2020, and it separates three things a supplier may make:[1, 2]
- System: an assembly of devices that performs a function in a vehicle, such as braking, approved for a given vehicle type.
- Component: a device that can be approved independently of a vehicle, such as a tire or a lamp.
- Separate technical unit: a device approved separately but only for specified vehicle types, such as a replacement silencer.
The technical requirements are mostly UN Regulations, written at the United Nations Economic Commission for Europe (UNECE) and applied in the EU. The General Safety Regulation, Regulation (EU) 2019/2144, lists them, including UN Regulation No. 10 on electromagnetic compatibility, No. 48 on lighting installation, Nos. 13 and 13-H on braking, No. 90 on replacement brake linings and Nos. 30, 54 and 117 on tires.[3]
An approved component or separate technical unit must carry an approval mark.[1] Approval is not a one-time event either. The authority checks that production keeps matching the approved type, known as conformity of production, and a manufacturer established outside the EU must appoint a single EU representative to deal with it.[1] Vehicle type approval and homologation works differently again in the US and Japan.
How does self-certification work in the US?
In the US, no agency approves a vehicle or part before sale. Manufacturers certify that their products meet the Federal Motor Vehicle Safety Standards (FMVSS), and the National Highway Traffic Safety Administration (NHTSA) enforces afterwards through testing, defect investigations and recalls.
It is illegal to make, sell or import vehicles or equipment covered by a safety standard unless they comply and carry the manufacturer’s certification.[4] For equipment, that can be a label on the item or on the outside of its container.[5] Some standards apply to equipment directly: the lighting standard, FMVSS No. 108, covers replacement lamps as well as original ones and requires headlamp lenses to be marked “DOT”, and others cover tires, glazing, brake hoses and seat belt assemblies.[6]
The duty continues after sale. Once a manufacturer determines that a safety defect or noncompliance exists, it must report to NHTSA within five working days, and where the faulty equipment went into several makers’ vehicles, the equipment maker reports on the equipment and each vehicle maker on its own vehicles.[7] Foreign manufacturers must also designate a US agent for service of process before offering vehicles or equipment for import.[8]
This table shows how the two systems differ for a parts supplier.
| EU | US | |
|---|---|---|
| Who confirms compliance before sale | An approval authority, with a technical service testing | The manufacturer, by self-certification |
| What the part carries | An approval mark, where it has its own approval | DOT marking or a certification label, where an equipment standard applies |
| What happens after launch | Conformity of production checks and market surveillance | Agency testing, defect reports within five working days, recalls |
| Representation for non-local makers | A single EU representative for the approval | An agent for service of process |
Which chemical and material rules apply to automotive parts?
In the EU, the legal material rules that bite on vehicle parts are the end-of-life vehicle rules and REACH, the EU chemicals regulation. A frequent mistake runs the other way: the Restriction of Hazardous Substances (RoHS) Directive excludes means of transport, so electronics made for a vehicle generally fall under the vehicle rules instead.[9]
End-of-life vehicles: The End-of-Life Vehicles (ELV) Directive 2000/53/EC bans lead, mercury, cadmium and hexavalent chromium in vehicle materials and components, apart from exemptions in its Annex II, many of which expire on set dates.[10] Regulation (EU) 2026/1738 replaces it. It entered into force on August 13, 2026, and applies from September 1, 2028, but the directive’s heavy-metal ban and exemptions continue until August 31, 2032.[11]
From September 1, 2032: The new regulation’s own heavy-metal ban applies to vehicle types approved from that date and to new parts for them, and plastic in those types must contain at least 15% recycled plastic by weight, rising to 25% from September 1, 2036. At least 20% of that recycled share must come from end-of-life vehicles or parts removed during use, and every vehicle placed on the market from that date needs a digital circularity vehicle passport.[11] The regulation also requires vehicle makers to collect data through the full supply chain and verify what suppliers send them, which is where many supplier data requests will come from.[11]
REACH: A supplier of an article containing a substance on the REACH Candidate List of substances of very high concern above 0.1% by weight must tell its customer, and the producer or importer of the article must notify the European Chemicals Agency (ECHA) once more than one tonne a year of that substance goes out in its articles, unless an exemption applies.[12] The list grows with each update, so a part that was clear last year may not be now.
Batteries: The Batteries Regulation, Regulation (EU) 2023/1542, has applied since February 18, 2024, to starting, lighting and ignition (SLI) batteries and electric vehicle batteries alike, and electric vehicle batteries need a digital battery passport from February 18, 2027.[13]
The US has no federal counterpart to the ELV rules, so restrictions come from separate statutes, such as Washington’s limits on heavy metals and copper in brake friction material, which fell to 0.5% copper from January 1, 2025.[14] Rules like these move on separate schedules in each market; Daptic tracks regulatory changes across jurisdictions, flags the ones that affect a company’s products and works out which requirements apply to each part in each market.
What is IMDS, and is it required by law?
The International Material Data System (IMDS) is not a law. It is an industry database, run by DXC Technology for the vehicle makers that use it, where suppliers report what their parts are made of so that the makers can meet their legal duties under the ELV rules and REACH.[15]
A material data sheet in IMDS breaks a part into its components, the materials in each and the substances in each material, with weights. Each supplier sends its sheet to its customer, which builds it into its own sheet, until the data reaches the vehicle maker. Substances on the Global Automotive Declarable Substance List (GADSL), an industry list, and on the REACH Candidate List are flagged in the system.[16]
The rules for filling in a sheet are recommendations from the IMDS Steering Committee, which the system’s own guidance says many companies treat as requirements.[15] Recommendation 001, the general one, was revised and a new Recommendation 026 on regulatory information was added, both valid from April 24, 2026.[16] The binding force comes from the buyer’s contract, since many makers won’t approve a part for production until its material data sheet is accepted. Declaring substances through IMDS reporting is covered in more detail in its own article.
What quality and safety standards do automotive customers require?
Most of what a customer audits is not law. It comes from standards and contracts, and the customer’s supplier manual, with its customer-specific requirements, usually adds to both.
IATF 16949:2016 is the automotive quality management standard, aligned with ISO 9001. ISO 26262 covers functional safety, meaning avoiding harm from faults in electrical and electronic systems, and ISO/SAE 21434 covers cybersecurity engineering. This table shows where each common request comes from.
| Request | Where the duty comes from |
|---|---|
| EU type approval and conformity of production | EU law, for the approval holder |
| FMVSS certification and defect reporting | US law, for the vehicle or equipment manufacturer |
| ELV substance limits, REACH Candidate List information | EU law |
| IMDS material data sheet | Buyer contract, supporting the vehicle maker’s legal duties |
| IATF 16949:2016 certification | Industry standard, required by contract |
| ISO 26262 functional safety process | International standard, required by contract |
| ISO/SAE 21434 cybersecurity engineering | International standard, required by contract; supports the maker’s duty under UN Regulation No. 155 |
| Conflict minerals reporting | US securities rule for listed customers, passed down by contract |
Two of these show how a legal duty reaches a supplier without naming it. UN Regulation No. 155 requires the vehicle maker to run a cybersecurity management system and show how it manages dependencies on its suppliers, and in the EU it has applied to all new cars, vans, trucks and buses since July 7, 2024.[3, 17] The US conflict minerals rule binds companies that file reports with the Securities and Exchange Commission (SEC), but their suppliers are the ones who fill in the questionnaire.[18]
What evidence should an automotive parts supplier keep?
A supplier should be able to show, for each part and market, which rule applies, whether it comes from law, a standard or a contract, and what proves it. That usually means:
- approval certificates and test reports for parts with their own approval
- certification records and marking evidence for parts covered by an FMVSS
- accepted IMDS sheets and REACH Candidate List checks
- the quality, functional safety and cybersecurity records the customer requires
- the version of the supplier manual each part was approved under
The type of part narrows the list:
- Safety-critical parts: Brakes, lighting and restraints need component approvals in the EU and FMVSS certification in the US.
- Electrical and electronic parts: Electromagnetic compatibility, functional safety and cybersecurity evidence; radio and connected-device rules for telematics are a separate topic.
- Batteries: The Batteries Regulation applies on top of the vehicle rules.
- Tires: These carry a component approval in the EU and DOT marking and certification in the US.
- Aftermarket parts: Replacement lamps, brake linings and tires need the same approval or certification as original ones, and the supplier sells them under its own responsibility, not the vehicle maker’s.
Moving a part to a new market changes the route, not just the paperwork. A part approved for an EU maker relies on approval before sale, while the same part in the US needs certification evidence the supplier can defend if NHTSA tests it.
Example: applying these rules to a lighting control module
As an example of applying this to a product, consider a composite supplier of an electronic module that drives a vehicle’s headlamps, selling to one European vehicle maker and one US maker.
The module has no approval of its own in either market. In the EU, it is assessed within the maker’s lighting installation and electromagnetic compatibility approvals, so the supplier provides test reports to the maker’s specification. Because it is an electronic control unit, the maker’s cybersecurity management system reaches it too, and the maker asks for ISO/SAE 21434 work products.
In the US, the maker certifies the vehicle to FMVSS No. 108, and the supplier’s evidence has to support that certification. If a safety defect turns up, both companies face reporting decisions with a five-working-day clock.
For materials, the module goes into IMDS with its circuit board, housing and connector broken down to substance level. Its solder may rely on an ELV exemption for lead, which the supplier checks against its expiry date, and RoHS doesn’t apply because the module is made for a vehicle.
Both customers require IATF 16949 certification, and the US maker’s supplier manual adds its own launch documents. Most of the work here comes from the customers, not from either government.
Frequently asked questions
Is IMDS a legal requirement?
No. IMDS is an industry database that vehicle makers require by contract, and it supports their legal duties under the EU end-of-life vehicle rules and REACH.
Do automotive parts suppliers need type approval?
Only for some parts. In the EU, components such as lamps, tires and brake linings can be approved on their own, while most parts are covered through the vehicle maker’s approval.
Does NHTSA approve auto parts?
No. US manufacturers certify their own vehicles and equipment against the FMVSS, and NHTSA enforces afterwards through testing, defect reports and recalls.
Does RoHS apply to automotive parts?
Not to parts made for vehicles. The RoHS Directive excludes means of transport, so those parts fall under the end-of-life vehicle rules, which restrict lead, mercury, cadmium and hexavalent chromium.
When does the EU End-of-Life Vehicles Regulation apply?
From September 1, 2028. Its recycled plastic and heavy-metal requirements start for vehicle types approved from September 1, 2032, and the old directive’s restrictions apply until then.
Notes and sources
- Regulation (EU) 2018/858 on the approval and market surveillance of motor vehicles, particularly Articles 13(4) and 38(2); Article 3(18) to (20).
- European Commission, Technical harmonisation in the EU
- Regulation (EU) 2019/2144 (General Safety Regulation), particularly Article 4(2) and Annex I; Annex II, point D4.
- 49 U.S.C. 30112, particularly § 30112(a)(1).
- 49 U.S.C. 30115, particularly § 30115(a).
- 49 CFR 571.108 (FMVSS No. 108), particularly § 571.108.
- 49 CFR Part 573, Defect and noncompliance responsibility and reports, particularly sections 573.3(f) and 573.6(b).
- 49 CFR Part 551, Procedural rules, particularly sections 551.45 and 551.46(a).
- Directive 2011/65/EU (RoHS), particularly Article 2(4)(f).
- Directive 2000/53/EC (ELV Directive), particularly Article 4(2) and Annex II.
- Regulation (EU) 2026/1738 on circularity requirements for vehicle design and the management of end-of-life vehicles, particularly Articles 4(2), 5(4), 6, 57(1) and 59.
- Regulation (EC) No 1907/2006 (REACH), particularly Articles 7 and 33.
- Regulation (EU) 2023/1542 (Batteries Regulation), particularly Articles 3(1), 13(6), 77(1) and 96(2).
- Revised Code of Washington, RCW 70A.340.030
- IMDS, Reading for new users
- IMDS, News 2026 (items of February 5 and March 27, 2026).
- UN Regulation No. 155, paragraphs 1.1 and 7.2.2.5.
- 17 CFR 240.13p-1, particularly § 240.13p.
Additional sources:
- UN Regulation No. 155 on cybersecurity and cybersecurity management systems
- IMDS, News 2026
- IATF 16949:2016
- ISO 26262-1:2018, Road vehicles: Functional safety
- ISO/SAE 21434:2021, Road vehicles: Cybersecurity engineering
This article reflects Michelle Ng’s independent opinions, not necessarily those of Daptic.



