Tyre rules in the EU and US: labelling, abrasion limits and what’s next

Michelle NgSenior Regulatory Analyst
Tyre rules in the EU and US come in two layers: a label telling buyers how a tyre performs, and safety and environmental limits it must meet before sale. The EU requires a graded tyre label backed by a database entry. The US requires Uniform Tire Quality Grading and federal safety standards, with no fuel-efficiency label.
Key points
- The EU tyre label is a disclosure duty, not an approval: A tyre can pass type approval and still break the labelling rules if its label or database entry is wrong or missing.
- The EU label grades fuel efficiency, wet grip and noise: It also carries symbols for snow and ice grip, and each tyre type must be registered in an EU database before sale.
- The US has no federal fuel-efficiency label in force: Passenger car tires carry grades for treadwear, traction and temperature, which the manufacturer or brand owner assigns itself.
- Abrasion is the next measured property: Euro 7 sets dates from July 1, 2028, for limits on how much material tyres shed, starting with passenger car tyres.
- Each role has its own duties: Suppliers, importers, dealers and vehicle makers carry different obligations in each market.
What rules apply to tyres in the EU and US?
Two separate sets of rules apply to tyres in both markets: one decides whether a tyre may be sold at all, and the other decides what buyers must be told about it. Many physical products work this way. A household appliance, for example, must meet safety law before sale and may also need an energy label, and the two duties sit in different laws with different checks.
For tyres the split is sharp. In the EU, minimum safety and environmental limits come through type approval (an authority’s confirmation, before sale, that a product type meets technical requirements), while the label comes from Regulation (EU) 2020/740 on tyre labelling. In the US, Federal Motor Vehicle Safety Standards set minimum performance, and separate consumer information rules decide what is printed on the tire.
What is the EU tyre label?
The EU tyre label grades a tyre on fuel efficiency, wet grip and external rolling noise, with symbols for snow and ice grip. Regulation (EU) 2020/740 has applied since May 1, 2021, when it replaced the earlier tyre labelling regulation.
It covers C1 tyres (mainly passenger cars), C2 tyres (light commercial vehicles such as vans) and C3 tyres (trucks and buses). Professional off-road tyres, racing tyres, studded tyres, temporary spares, tyres rated below 80 km/h and used tyres are excluded, though used tyres imported from outside the EU are covered. Retreaded tyres come in only once a suitable test method has been set.[1]
The table below shows what each part of the label measures.
| Label element | What it shows | Tyre classes |
|---|---|---|
| Fuel efficiency | Rolling resistance, graded A (best) to E | C1, C2, C3 |
| Wet grip | Braking on wet roads, graded A to E | C1, C2, C3 |
| External rolling noise | Class A, B or C against the EU noise limit, plus the value in decibels | C1, C2, C3 |
| Snow grip | Symbol for tyres meeting the severe snow test in UN Regulation No 117 | C1, C2, C3 |
| Ice grip | Symbol for tyres meeting the minimum ice grip values | C1 |
Each class has its own grade ranges, so an A for a truck tyre is not measured against the same number as an A for a car tyre. For noise, class A means at least 3 decibels below the limit value, B means at or under the limit, and C means above it.[1]
Who has to provide the EU tyre label, and what is EPREL?
The supplier must label each tyre, register it in the European Product Registry for Energy Labelling (EPREL) and keep technical documentation, while dealers and vehicle sellers must show the label to buyers. The supplier is the manufacturer established in the EU, a non-EU manufacturer’s authorized representative, or the importer.
Suppliers: They must provide a sticker label on each tyre, or a printed label for a batch of identical tyres, plus a product information sheet. The label must also appear in advertising and technical promotional material for a specific tyre type, and next to the price in distance sales.[1]
EPREL registration: Before a tyre type is placed on the market, meaning first supplied for sale in the EU, the supplier must enter its information in the database. A change that affects the label or information sheet creates a new tyre type, and records must be kept for five years after the last unit of a type is placed on the market.[1]
Distributors and dealers: They must make sure the sticker label is visible at the point of sale, or a printed label is shown before the sale, and that the information sheet is available. Online sellers must display the label near the price.[1]
Vehicle suppliers and dealers: Before selling a new vehicle, they must give the buyer the label for the tyres fitted or offered with it.[1]
National market surveillance authorities check declared grades through a verification procedure in the regulation, can recover testing costs from non-compliant suppliers and set the penalties.[1] A tyre can pass type approval and still be non-compliant because its label, information sheet or EPREL entry is wrong or missing.
How is EU tyre approval different from the tyre label?
Approval sets the minimum a tyre must reach to be sold, and the label grades where it sits above that minimum. Under the General Safety Regulation, Regulation (EU) 2019/2144, which has applied since July 6, 2022, every tyre placed on the market must meet the requirements of the UN Regulations listed in its Annex II.[2]
Those UN Regulations come from the United Nations Economic Commission for Europe (UNECE). They include No 117, which sets limits for rolling resistance, wet grip and rolling noise. A tyre that fails a limit in No 117 can’t be approved, but one that passes can still land anywhere from A to E on the label, and that grade has to be right.
What are the US tire labeling rules?
The US has no federal fuel-efficiency label in force for tires. The main consumer information is Uniform Tire Quality Grading (UTQG), alongside safety standards and tire registration rules run by the National Highway Traffic Safety Administration (NHTSA).
UTQG: New passenger car tires carry three grades: treadwear as a number such as 400, traction as AA, A, B or C, and temperature resistance as A, B or C. The grades are molded on the sidewall and shown on a tread label. The tire manufacturer, or the brand name owner for tires sold under its brand, assigns them using the test procedures in the rule. Deep tread tires, winter-type snow tires, temporary spares, tires of 12 inches or less in rim diameter and limited production tires are excluded.[3]
UTQG has no fuel-efficiency element. A federal tire fuel efficiency program exists in the regulations, but its rating scales and label are still marked reserved, waiting for a final rule.[4]
Tire identification and registration: Each new tire carries a 13-symbol tire identification number (TIN) on one sidewall, made up of a plant code assigned by NHTSA, a manufacturer’s code and the week and year of manufacture. Manufacturers and brand name owners must supply dealers with registration forms and keep purchaser records for at least five years, so owners can be reached in a recall.[5]
Safety standards: FMVSS 139 sets tests and sidewall markings for radial tires on vehicles up to 10,000 pounds, FMVSS 109 covers bias ply tires, and FMVSS 119 covers tires for heavier vehicles and motorcycles. The DOT symbol on the sidewall is the manufacturer’s own certification that the tire meets these standards, with no government approval before sale. FMVSS 110 governs which tires a vehicle maker fits and the tire placard.[6–9]
Tire pressure monitoring: FMVSS 138 requires a tire pressure monitoring system (TPMS) on light vehicles that warns within 20 minutes once a tire is 25 percent below the recommended pressure. This is the vehicle maker’s duty, not the tire maker’s.[10] The EU’s General Safety Regulation has a similar requirement for vehicles.[2]
Foreign manufacturers: A manufacturer outside the US must designate an agent in the US to receive legal notices.[11]
What are the tyre abrasion limits under Euro 7?
Euro 7, Regulation (EU) 2024/1257, provides for limits on tyre abrasion, meaning the mass of material a tyre loses through wear and releases into the environment. It sets dates for each tyre class.[12]
The table shows the Euro 7 dates for each class.
| Tyre class | New tyre types approved only if compliant from | Non-compliant tyres banned from being placed on the market from | Non-compliant tyres already on the market may be sold until | Status as of November 2026 |
|---|---|---|---|---|
| C1 | July 1, 2028 | July 1, 2030 | June 30, 2032 | Dates set |
| C2 | April 1, 2030 | April 1, 2032 | March 31, 2034 | Dates set |
| C3 | April 1, 2032 | April 1, 2034 | March 31, 2036 | Dates set |
From the 2030 and later dates, new vehicles fitted with non-compliant tyres of that class can’t be registered either. Read the first column as a type-approval date and the second as a sales date: they are different obligations.
Euro 7 directs the Commission to set the limits by delegated act, drawing on UNECE’s work, and to develop its own method if the UN had not adopted rules by July 1, 2026, for C1 tyres.[12] In June 2026, UNECE’s World Forum for Harmonization of Vehicle Regulations (WP.29) adopted a new UN Regulation on abrasion of C1 tyres. It measures abrasion on a laboratory drum or in an on-road convoy against a standard reference tyre, and it is aimed at new C1 tyres sold from June 30, 2028.[13]
Abrasion isn’t on the EU label yet. The labelling regulation lets the Commission add abrasion and mileage once reliable test methods exist and after an impact assessment.[1] Abrasion data a tyre maker collects now will matter for both approval and, possibly, the label for products placed on the market from 2028.
What else is changing for tyre rules?
The EU label is under review, and US attention is on tire chemicals rather than efficiency.
June 24, 2026: The Commission published its evaluation report on the tyre labelling regulation, due under the regulation by June 1, 2025, together with a proposal to amend it and the energy labelling regulation to make more use of digital labels. The proposal has not been adopted, so the current label duties still apply.[14, 15]
November 19, 2024: The Environmental Protection Agency (EPA) published an advance notice of proposed rulemaking under the Toxic Substances Control Act on 6PPD, a chemical added to tires to slow cracking, and 6PPD-quinone, its breakdown product, which is toxic to salmon. An advance notice gathers information and is not a proposed rule.[16]
California: The Department of Toxic Substances Control listed motor vehicle tires containing 6PPD as a Priority Product.[17] Daptic tracks regulatory changes across the EU, the US and individual states and flags the ones that affect a company’s products, which helps when a UN vote, a Commission proposal and a state chemical listing all move tyre rules in the same year.
What should each business in the tyre supply chain check?
Each role in the chain has its own list, and one business can hold more than one role.
- Tyre supplier in the EU (manufacturer, authorized representative or importer): Confirm each type’s grades, register it in EPREL before first sale, supply labels and information sheets, and keep test evidence ready for verification.
- Manufacturer, brand owner or importer in the US: Certify each tire to the applicable FMVSS, mark the DOT symbol and TIN, assign UTQG grades for passenger car tires, run tire registration and designate a US agent if based abroad.
- Dealer and distributor: In the EU, show the label at the point of sale and online. In the US, pass on registration information or give buyers the form, and stop selling tires when a recall notice requires it.[5]
- Vehicle maker: In the EU, give buyers the label for fitted tyres and plan for the Euro 7 registration ban on vehicles with non-compliant tyres. In the US, meet FMVSS 110 and 138 and keep records of the tires on each vehicle for five years.
How does this apply to one tyre sold in both markets?
As an example of applying this to a product, consider a summer passenger car tyre made outside both markets and sold under a retailer’s brand.
In the EU, it is a C1 tyre. It needs approval under UN Regulations No 30 and No 117, and the importer, as supplier, must register the type in EPREL and supply a label with its fuel efficiency, wet grip and noise grades. If a compound change later moves wet grip from B to C, that is a new tyre type with a new EPREL entry, even though approval still holds. A new type approved from July 1, 2028, will also have to meet the Euro 7 abrasion limits.
In the US, the same tyre needs FMVSS 139 certification, the DOT symbol and a TIN with an NHTSA plant code. The retailer, as brand name owner, assigns the UTQG grades and runs registration, and the foreign factory designates a US agent. No fuel-efficiency grade is required. The EU wet grip grade and the UTQG traction grade come from different tests, so one can’t be converted into the other.
Frequently asked questions
Is the EU tyre label the same as type approval?
No. Type approval confirms a tyre meets minimum limits, while the label is a separate disclosure duty with its own EPREL registration and checks, so a tyre can pass approval and still have a non-compliant label.
Do US tires have a fuel efficiency label?
No. A federal tire fuel efficiency program exists in the regulations, but its ratings and label are still reserved, and the UTQG grades cover only treadwear, traction and temperature.
Does NHTSA test tires before they get UTQG grades?
No. The manufacturer or brand name owner assigns the grades using the procedures in the rule, and each tire must be able to perform at the grade shown.
When do tyre abrasion limits apply in the EU?
Not before July 1, 2028, when new types of passenger car tyres must comply for approval. From July 1, 2030, non-compliant passenger car tyres can’t be placed on the market.
Does a design change need a new EPREL entry?
Only if it changes the label or the product information sheet. In that case it counts as a new tyre type and needs its own entry.
Does the EU tyre label apply to retreaded tyres?
Not yet. Retreaded tyres come under the label only once a suitable test method has been set.
Notes and sources
- Regulation (EU) 2020/740 (tyre labelling), particularly Articles 2–8, 10–13 and 18; Annex I, Parts A to E.
- Regulation (EU) 2019/2144 (General Safety Regulation), particularly Articles 5 and 19 and Annex II.
- 49 CFR 575.104 (Uniform Tire Quality Grading Standards), particularly § 575.104.
- 49 CFR 575.106 (Tire fuel efficiency consumer information program), particularly paragraph (e).
- 49 CFR Part 574 (Tire identification and recordkeeping), particularly sections 574.5, 574.6, 574.7, 574.8 and 574.10.
- 49 CFR 571.139 (FMVSS 139), particularly § 571.139.
- 49 CFR 571.109 (FMVSS 109), particularly § 571.109.
- 49 CFR 571.119 (FMVSS 119), particularly § 571.119.
- 49 CFR 571.110 (FMVSS 110), particularly § 571.110.
- 49 CFR 571.138 (FMVSS 138), particularly § 571.138.
- 49 CFR Part 551 (Procedural rules), Subpart D
- Regulation (EU) 2024/1257 (Euro 7), particularly Articles 3(31), 11(4) to 11(6), 14(3)(j), 15(2), 15(3) and 21.
- UNECE, press release on abrasion limits for new C1 tyres (2026)
- Commission report COM(2026) 326 on the implementation of Regulation (EU) 2020/740
- Commission proposal COM(2026) 565 on energy and tyre labelling
- EPA, Advance notice of proposed rulemaking on 6PPD and 6PPD-quinone, 89 FR 91299, November 19, 2024
- California DTSC, Adopted Priority Product: Motor Vehicle Tires Containing 6PPD
This article reflects Michelle Ng’s independent opinions, not necessarily those of Daptic.



