Euro 7: what changes for cars, vans, trucks and tyres, and when

Michelle NgSenior Regulatory Analyst
Euro 7, Regulation (EU) 2024/1257, is the EU’s emission standard for new cars, vans, buses and trucks and for the brakes, tyres and traction batteries that go with them. It applies to new car and van types from November 29, 2026, to new truck and bus types from May 29, 2028, and to tyres in stages from July 1, 2028.
Key points
- Euro 7 is more than a tailpipe update: It adds limits on brake particles and tyre wear, minimum battery durability for electric and plug-in hybrid vehicles, and emission duties that last for most of a vehicle’s life.
- There is no single Euro 7 date: New types and all new registrations have separate dates a year apart, and trucks and buses start 18 months after cars and vans.
- Tyres run on their own clock: New car tyre types must comply from July 1, 2028, van and truck tyres follow in 2030 and 2032, and the abrasion limits themselves are still to be set.
- Euro 7 works inside type approval: The same approval authorities check vehicles, engines, brake systems and tyres against it.
- Several details are still open: Heavy-duty test methods, tyre limits, later brake limits and a Commission proposal to simplify testing.
What is Euro 7?
Euro 7 is one EU regulation that limits what road vehicles emit, from the exhaust and from parts that wear, and requires them to keep meeting those limits for most of their working life. It was adopted on April 24, 2024, published in the Official Journal on May 8, 2024, and entered into force on May 28, 2024.[1]
It takes over from Euro 6, the previous standard for cars and vans, and Euro VI for trucks and buses, so a single law now covers both a small hatchback and a long-haul truck.
Euro 7 does not replace type approval, the EU process in which an approval authority checks a vehicle design before it can be sold. It works inside it: each vehicle type needs an emission type-approval under Euro 7, and authorities check production and vehicles in service against it.[1]
Which vehicles and products does Euro 7 cover?
Euro 7 covers new cars, vans, buses, trucks and heavy trailers, their engines, brake systems, traction batteries and replacement pollution control parts, and the tyres fitted to them.[1] It uses the vehicle categories of the EU type-approval framework:
- Light-duty vehicles: cars (category M1) and vans and other goods vehicles up to 3.5 tonnes (N1).
- Heavy-duty vehicles: buses and coaches (M2 and M3), trucks over 3.5 tonnes (N2 and N3) and trailers over 3.5 tonnes (O3 and O4).
- Tyres: classes C1 (mainly cars), C2 (vans and light trucks) and C3 (trucks and buses), except ice grip tyres.
Vehicles outside those categories, such as motorcycles and tractors, stay under their own rules. One option blurs the line: an N2 vehicle of 3.5 to 5 tonnes derived from an N1 van can be approved under the light-duty rules and designated “Euro 7ext”.[1]
What changes compared with Euro 6 and Euro VI?
For many manufacturers and suppliers, the larger changes sit outside the exhaust: brake and tyre limits, battery durability, longer compliance periods and on-board monitoring. The tailpipe limits are only part of the work.
Tailpipe limits: Cars and the lightest vans have separate limits for positive ignition engines (mostly petrol) and compression ignition engines (mostly diesel), and heavier vans get higher limits. Trucks and buses have limits on laboratory test cycles and in real-world driving, where the nitrogen oxides limit is 260 mg/kWh, and those limits also cover non-methane organic gases (80 mg/kWh), ammonia (60 mg/kWh), methane (500 mg/kWh) and nitrous oxide (200 mg/kWh) on laboratory cycles.[1]
The table below shows the main limits for cars and for trucks and buses on laboratory cycles.
| Pollutant | Cars and N1 class I vans, per km (petrol / diesel) | Trucks and buses, laboratory cycles, per kWh |
|---|---|---|
| Carbon monoxide | 1,000 mg / 500 mg | 1,500 mg |
| Nitrogen oxides | 60 mg / 80 mg | 200 mg |
| Particulate mass | 4.5 mg | 8 mg |
| Particle number | 6 × 10¹¹ | 6 × 10¹¹ |
Lifetime durability: Vehicles must meet the limits over a main lifetime and an additional lifetime, measured by distance or age, whichever comes first.[1] During the additional lifetime, the gaseous pollutant limits are adjusted by a multiplier of 1.2, and a delegated act of June 9, 2026, extended that figure to heavier buses and trucks.[1, 2]
This table shows the lifetimes by vehicle category.
| Category | Main lifetime | Additional lifetime |
|---|---|---|
| M1, N1, M2 | 160,000 km or 8 years | Up to 200,000 km or 10 years |
| N2, N3 up to 16 t, M3 up to 7.5 t | 300,000 km or 8 years | Up to 375,000 km or 10 years |
| N3 over 16 t, M3 over 7.5 t | 700,000 km or 12 years | Up to 875,000 km or 15 years |
On-board monitoring: Vehicles must carry on-board monitoring (OBM) systems that watch exhaust emissions, detect when they exceed the limits by at least 2.5 times and can report it off-board, alongside fuel and energy consumption monitoring and battery state-of-health monitors.[1]
Battery durability: Plug-in hybrid and fully electric cars must keep at least 80% of their battery’s original usable energy up to five years or 100,000 km, and 72% up to eight years or 160,000 km. For vans the figures are 75% and 67%, and heavy-duty values have not been set.[1]
Environmental vehicle passport: Manufacturers must issue a passport with each vehicle’s environmental data, delivered with the vehicle and viewable in it or through a QR code.[1]
What are the Euro 7 brake emission limits?
For cars and vans, Euro 7 limits brake particles up to 10 micrometers across (PM10) to 3 mg/km for fully electric models and 7 mg/km for all other powertrains until December 31, 2029. The heaviest vans, N1 class III, get 5 mg/km and 11 mg/km.[1]
From January 1, 2035, the limit is 3 mg/km for every car and van, whatever the powertrain. The text leaves the values for 2030 to 2034, a brake particle number limit and all limits for trucks and buses to be set after a review, and the Commission must report on brake emissions by December 31, 2027.[1] [1]
The brake limit is part of the vehicle’s emission type-approval, so the vehicle manufacturer tests the brake system and holds the approval, using the test method that Commission Implementing Regulation (EU) 2026/1762 set on July 13, 2026.[3] Brake suppliers are drawn in twice: the vehicle maker needs their parts and data to pass, and from November 29, 2026, parts that need their own Euro 7 approval, brake systems included, cannot be sold or fitted to Euro 7 cars and vans without it, with heavy-duty vehicles following on May 29, 2028.[1]
What are the Euro 7 tyre abrasion limits?
The limits have not been set yet. Euro 7 fixes the dates and leaves the Commission to set the numbers in a delegated act, based on the work of the UN World Forum for Harmonization of Vehicle Regulations (WP.29), which maintains the international tyre rules.[1] Tyre abrasion is the mass a tyre loses as it wears and releases into the environment.[1]
The tyre manufacturer is responsible, because each new tyre type needs its own Euro 7 approval, separate from the vehicle. The Commission must set the limits by July 1, 2027, for C1 tyres, April 1, 2029, for C2 and April 1, 2031, for C3, and must develop its own test method if WP.29 has not adopted one in time.[1]
Each approval date falls a year after the deadline for the limits. Tyres already on the market before each ban date can still be sold for two more years: non-compliant C1 tyres until June 30, 2032, C2 until March 31, 2034, and C3 until March 31, 2036.[1]
When does Euro 7 apply?
Euro 7 applies in two steps for each category: first to new types (designs approved for the first time), then, a year later, to every new vehicle registered, whatever its approval date.[1]
The table below lists the dates in the order a manufacturer plans against them.
| Date | What has to comply | Status as of November 2026 |
|---|---|---|
| May 28, 2024 | Regulation enters into force | In force |
| November 29, 2026 | New car and van types (M1, N1) and approved parts for them | Applies in days |
| November 29, 2027 | All new cars and vans registered | Upcoming |
| May 29, 2028 | New bus, truck and heavy trailer types (M2, M3, N2, N3, O3, O4) and approved parts for them | Upcoming |
| July 1, 2028 | New C1 tyre types | Upcoming; limits not yet set |
| May 29, 2029 | All new buses, trucks and heavy trailers registered | Upcoming |
| April 1, 2030 | New C2 tyre types | Upcoming; limits not yet set |
| July 1, 2030 | All C1 tyres placed on the market; all new cars and vans from small-volume manufacturers | Upcoming |
| July 1, 2031 | All new heavy-duty vehicles from small-volume manufacturers | Upcoming |
| April 1, 2032 | New C3 tyre types; all C2 tyres placed on the market | Upcoming |
| April 1, 2034 | All C3 tyres placed on the market | Upcoming |
| January 1, 2035 | Brake limit of 3 mg/km for all cars and vans | Upcoming |
To read the table, ask two questions of each product: is it a new type, and when will each unit be registered or placed on the market? Small-volume manufacturers are those registering fewer than 10,000 cars, 22,000 vans, 450 buses or 6,000 trucks a year in the EU, subject to conditions on group ownership.[1]
What do manufacturers have to do to meet Euro 7?
Manufacturers have to prove compliance at approval and then keep it for the vehicle’s lifetime. For each model, the work breaks down into these steps:
- Map products to dates: Confirm the category, class and type status of each model and tyre line, including whether a light N2 vehicle should go for Euro 7ext.
- Plan the tests: Run the approval tests Euro 7 sets for the category, from laboratory and real-driving emissions to brake and battery tests, and sign the required declarations of compliance.[1]
- Build the durability case: Show that emissions and battery performance hold over the main and additional lifetime, since authorities keep checking vehicles in service.
- Support the monitoring: Make OBM, consumption monitoring and battery health monitors work and report data as the implementing acts require.
- Issue the passport: Prepare environmental vehicle passport data for every vehicle.
- Line up suppliers: Collect brake, battery, engine and tyre data, and approvals for replacement parts.
For heavy-duty vehicles with a separately approved engine, the vehicle manufacturer holds the emission type-approval, the engine maker runs some vehicle-related tests, and the two can agree that the engine maker takes on in-service duties.[1]
The checks land on the approval authority and its technical service (the test body it designates), which witness tests, check that production matches the approved type and test vehicles in use, while market surveillance authorities run their own checks.[1] Because one vehicle line’s requirements sit across the regulation, several implementing and delegated acts and a pending proposal, a plan built now has to be revisited as each act appears. Daptic tracks changes like these across jurisdictions, flags the ones that affect a company’s products and works out which requirements apply to each product in each market.
What is still to be decided about Euro 7?
Four open items could change a Euro 7 test plan.
- Heavy-duty test methods: Euro 7 required implementing acts for buses, trucks and trailers by November 29, 2026. The car and van acts arrived on July 25, 2025, for exhaust, monitoring and the passport, and July 13, 2026, for brakes and battery durability.[1] [3–6]
- Tyre abrasion limits: These are due by July 1, 2027, for C1 tyres, with C2 and C3 following in 2029 and 2031.[1]
- Later brake and battery values: The 2030 brake limits, heavy-duty brake limits and heavy-duty battery minimums depend on Commission reviews due by December 31, 2027.[1]
- The automotive omnibus proposal: On December 16, 2025, the Commission proposed dropping the dedicated low-temperature laboratory test for cars and vans, since real-driving tests already cover -7 °C, and moving heavy-duty demonstration tests from each vehicle type to each vehicle category. Parliament’s committees had a vote scheduled for November 4, 2026, and a plenary vote is forecast for December 14, 2026; it is still a proposal, so the current requirements apply.[7, 8]
How do the Euro 7 dates apply to a van approved before November 2026?
As an example of applying these dates to a product, consider a composite manufacturer of a mid-size van, an N1 class II vehicle, whose diesel and electric versions were approved under Euro 6 in 2025. Because the type was approved before November 29, 2026, the new-type date does not force a new approval.
The registration date does. From November 29, 2027, certificates of conformity for new N1 vans that do not meet Euro 7 stop being valid for registration, so every unit registered from then on needs a Euro 7 approval.[1] Vans built in late 2027 and still unregistered in dealer stock are caught too.
Working back from that date, the manufacturer needs its Euro 7 approval well before November 2027. The diesel must meet the class II tailpipe limits, a brake limit of 7 mg/km, OBM and the 160,000 km or eight-year main lifetime plus the additional lifetime. The electric version needs 3 mg/km for brakes and battery minimums of 75% and 67%. Every van needs an environmental vehicle passport, and the tyre supplier works to its own C1 or C2 dates.
Frequently asked questions
When does Euro 7 come into force?
Euro 7 entered into force on May 28, 2024, but applies from later dates: November 29, 2026, for new car and van types, November 29, 2027, for all new cars and vans, and May 29, 2028, and May 29, 2029, for trucks, buses and heavy trailers.
Does Euro 7 apply to electric vehicles?
Yes. Electric cars and vans must meet the brake particle limit of 3 mg/km (5 mg/km for the heaviest vans until the end of 2029) and the battery durability minimums, and their tyres fall under the abrasion rules.[1]
Does Euro 7 apply to vehicles already on the road?
No. It applies to new types and to new vehicles registered from the application dates, not to vehicles already registered.
Are the Euro 7 tyre abrasion limits set yet?
No. The Commission must set them by July 1, 2027, for C1 tyres, April 1, 2029, for C2 and April 1, 2031, for C3, ahead of approval dates a year later.
Is Euro 7 being delayed?
Not so far. The Commission’s December 2025 proposal would change some testing requirements, but it has not been adopted, so the current dates apply.
Notes and sources
- Regulation (EU) 2024/1257 (Euro 7), particularly Articles 2–4, 5(2), 6, 7(4), 9–11, 14, 15, 18 and 21; Annex I, Tables 1 and 2; Article 6(1) and Annex IV, Table 1; Annex II; Annex I, Tables 4 to 8; Articles 10, 11(4) to (6) and 21; Article 7 and Annex V.
- Commission Delegated Regulation (EU) 2026/1216, particularly Annex.
- Commission Implementing Regulation (EU) 2026/1762, particularly Articles 1–4.
- Commission Implementing Regulation (EU) 2025/1706
- Commission Implementing Regulation (EU) 2025/1707
- Commission Implementing Regulation (EU) 2026/1764
- Commission proposal COM(2025) 993, particularly Article 4.
- European Parliament procedure file 2025/0422(COD))
Additional sources:
This article reflects Michelle Ng’s independent opinions, not necessarily those of Daptic.



