Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

Textile regulations: labelling, chemicals and the new EU rules for apparel

Textile regulations for apparel sold in the EU: fibre labelling, REACH chemical limits, and which sustainability rules apply now and which are coming.
A timeline card listing five EU dates for apparel rules, from the July 2026 destruction ban to national textile EPR schemes due in April 2028, with October 10, 2027 marked as the deadline.
November 20, 2026

Marc HaddadMarc HaddadForward Deployed Regulatory Engineer

 

Textile regulations in the EU work in three layers: the fibre label required by the Textile Labelling Regulation, the chemicals REACH restricts in finished articles, and newer sustainability rules on design, waste and green claims. Every garment or home textile sold in the EU is checked against all three, usually at the importer’s risk.

 

Key points

 

  • Fibre composition labelling under Regulation (EU) No 1007/2011 applies to any product that is at least 80% textile fibre by weight, and EU law does not require care, size or origin labels.
  • REACH restricts azo dyes, carcinogens, nonylphenol ethoxylates, PFHxA and more in textile articles, and the limits bind whoever imports the finished garment.
  • The ban on destroying unsold apparel and footwear has applied to large companies since July 19, 2026, but the textile ecodesign requirements and the digital product passport have not been adopted.
  • Textile extended producer responsibility (EPR) is adopted EU law with national schemes due by April 2028, while the Green Claims Directive is still a proposal.

What are the main textile regulations in the EU?

 

The main EU textile rules are the Textile Labelling Regulation, REACH and a newer group of sustainability laws, with the General Product Safety Regulation (GPSR) underneath all three. They have different owners, statuses and dates, so a garment that passes one can still fail another. The first step for any garment is to work out which regulations apply to your product.

 

The table shows each layer and where it stood on November 20, 2026.

 

Layer Main instrument What it covers Status on November 20, 2026
Label Regulation (EU) No 1007/2011 Fibre names and composition Applies since May 8, 2012
Chemicals REACH, Regulation (EC) No 1907/2006; POPs Regulation (EU) 2019/1021 Restricted substances; disclosure of substances of very high concern Applies; restrictions added over time
Sustainability ESPR, Regulation (EU) 2024/1781 Destruction ban; future ecodesign rules and digital product passport Ban applies to large companies since July 19, 2026; textile act planned for Q4 2027
Sustainability Directive (EU) 2025/1892 Textile EPR Adopted; national schemes due April 2028
Sustainability Directive (EU) 2024/825; Green Claims proposal Environmental claims 2024/825 applies since September 27, 2026; Green Claims not adopted
Under all three GPSR, Regulation (EU) 2023/988 Product safety and traceability Applies since December 13, 2024

What must a textile label say in the EU?

 

The Textile Labelling Regulation requires every textile product to show its full fibre composition, using only listed fibre names, whenever it is made available on the EU market. It does not cover care instructions, size or country of origin.

 

A textile product is one made only of textile fibres, and products that are at least 80% textile fibre by weight are treated the same way.[1] Composition is given per component, so a jacket’s shell and lining are declared separately.[1]

 

  • Fibre names: only the names in Annex I, such as “cotton” or “elastane”, in the official language of the country where the product is sold to consumers.[1]
  • Percentages: every fibre by weight in descending order, with “100%” or “pure” reserved for products made of one fibre.[1]
  • Small fibres: fibres of up to 5% each, or 15% together, may be grouped as “other fibres” where they can’t easily be stated at manufacture.[1]
  • Animal parts: leather or fur trim must be declared with the words “Contains non-textile parts of animal origin”.[1]
  • Tolerance: the declared composition may differ from the measured one by up to 3% of total fibre weight.[1]
  • Form: the label must be durable, legible, visible and accessible, and the composition must be shown before purchase, including in a web shop.[1]

 

Care symbols are voluntary in the EU, but any care or environmental claim you add must not mislead consumers.[2]

Who is responsible for textile compliance in the EU?

 

The party that places the product on the EU market holds the duties, and for goods made abroad that is the importer or the brand, not the factory. A supplier’s test report is evidence, but the obligation stays with you.

 

  • Manufacturer or importer: the manufacturer makes sure the label is supplied and accurate, and the importer does so when the manufacturer is outside the EU.[1]
  • Brand or retailer: a distributor that sells under its own name or trademark, attaches the label itself or changes its content is treated as the manufacturer.[1]
  • REACH importer: the EU importer of a finished garment must meet the Annex XVII restrictions and the disclosure duties for substances of concern.[3]
  • EU operator: under the GPSR, a product may only be placed on the market if an economic operator established in the EU is responsible for it.[4]

Which chemicals are restricted in clothing and textiles?

 

REACH Annex XVII lists the chemicals restricted in textile articles, and the limits apply to the finished article wherever it was made. The table shows the entries that most often decide whether a garment can be sold.

 

Annex XVII entry Substance Textiles caught Limit
4, 7, 8 Flame retardants TRIS, TEPA and PBB Textiles meant to touch the skin, such as garments, underwear and linen Not allowed
20 Organotins, including DBT and DOT Textiles meant to touch the skin, among other articles 0.1% by weight of tin
27 Nickel Metal parts in direct and prolonged skin contact, such as rivets, buttons and zips Release of 0.5 µg/cm² per week
43 Azo dyes that release listed aromatic amines Textile and leather articles in direct and prolonged skin contact 30 mg/kg per amine
46a Nonylphenol ethoxylates Textiles expected to be washed in water, since February 3, 2021 0.01% by weight
50 Polycyclic aromatic hydrocarbons (PAHs) Rubber or plastic parts in contact with the skin, such as prints and trims 1 mg/kg per PAH
51 Phthalates DEHP, DBP, BBP and DIBP Plasticised material, such as plastisol prints, since July 7, 2020 0.1% combined
61 Dimethylfumarate Any article 0.1 mg/kg
72 Listed carcinogenic, mutagenic or reprotoxic (CMR) substances, including formaldehyde Clothing, accessories, footwear and skin-contact textiles, since November 1, 2020 Per substance; formaldehyde 75 mg/kg
79 PFHxA, its salts and related substances Consumer clothing, accessories and footwear from October 10, 2026; other consumer textiles from October 10, 2027 25 ppb PFHxA and salts; 1,000 ppb related substances

 

On top of the restrictions, if any article in the product contains a substance on the Candidate List of substances of very high concern (SVHCs) above 0.1% by weight, you must give business customers the information needed for safe use and answer consumers within 45 days.[3] The same information goes to the European Chemicals Agency (ECHA) through its SCIP database,[5] and above one tonne a year of the substance you must also notify ECHA.[3]

 

The 0.1% is measured per article, not per garment.[6] A zip, a button or a sewn-on badge stays an article inside the jacket, so a plasticiser at 0.3% of a coated zip puller triggers the duty even if it is a trace across the whole product.

 

PFOA and its salts are also banned in articles under the POPs Regulation.[7] A restriction covering PFAS as a whole group, proposed in 2023, sets no limits yet. The US and EU PFAS regulations are laid out in one place in a separate guide.

Which new EU sustainability rules apply to apparel, and when?

 

Two of the new rules already apply: the destruction ban for large companies and the ban on generic environmental claims. Ecodesign requirements, the digital product passport and EPR fees are still to come.

 

July 19, 2026: the ban on destroying unsold apparel, clothing accessories and footwear started to apply to large companies.[8, 9] A delegated act the Commission adopted on February 9, 2026, sets the exceptions, such as unsafe or damaged products, while medium-sized companies follow in 2030 and micro and small companies are exempt. Large companies must also disclose the unsold consumer products they discard, in a standard format from February 2027.[8, 9]

 

September 27, 2026: Directive (EU) 2024/825 on empowering consumers started to apply through national law. It bans generic claims such as “eco-friendly” without recognised excellent environmental performance, sustainability labels not based on a certification scheme or set up by public authorities, and climate claims based on offsetting.[10, 11]

 

Q4 2027: the Commission plans to adopt the textile delegated act under the Ecodesign for Sustainable Products Regulation (ESPR), which will set ecodesign requirements and the digital product passport for apparel.[8, 12] Its content and application dates are not settled, so nothing in it applies today.

 

April 2028: Member States must have EPR schemes for textiles and footwear running, 30 months after Directive (EU) 2025/1892 entered into force on October 16, 2025, with national transposition due in June 2027.[5, 13] Producers will pay fees based on the weight, and where appropriate the number, of the products they place on the market, adjusted for sustainability. Check each market’s rules now rather than waiting for 2028.

 

March 22, 2023: the Commission proposed the Green Claims Directive, and Parliament adopted its position on March 12, 2024, but the Council has not, so it remains a proposal and not law.[14] Supply chain rules such as the EU Forced Labour Regulation sit alongside these.

What general product safety rules apply to clothing?

 

All clothing must be safe under the GPSR, which has applied since December 13, 2024, and the manufacturer’s name and postal and electronic address must appear on the product or, where that isn’t possible, on its packaging or an accompanying document.[4]

How do US and UK textile rules compare?

 

The US asks for more on the label than the EU, while Great Britain follows a copy of the EU fibre rules. The table compares the EU and US labels.

 

Requirement EU US
Fibre content Mandatory: Annex I names, percentages by weight, descending Mandatory: generic names, percentages by weight, descending (16 CFR 303.16)
Small fibres “Other fibres” for up to 5% each or 15% together “Other fiber” below 5%, unless functionally significant, such as 4% spandex (16 CFR 303.3)
Language Official language of the country of sale English; other languages may be added (16 CFR 303.4)
Country of origin Not required by the labelling regulation Required; on the front of the neck label for garments with a neck (16 CFR 303.33, 303.15)
Who made it Manufacturer’s and importer’s name and address (GPSR) Company name or Registered Identification Number (RN) (16 CFR 303.19)
Care label Voluntary Mandatory and permanent (16 CFR 423.6)

 

The Federal Trade Commission (FTC) enforces the Textile and Wool Acts through its labelling rules,[15, 16] and its Care Labeling Rule makes care instructions mandatory on wearing apparel.[17] Customs law separately sets country-of-origin marking rules for imported goods.[18]

 

US chemical rules for textiles are mostly state law. California has banned new textile articles containing regulated PFAS since January 1, 2025, and manufacturers must give sellers a certificate of compliance.[19] New York has banned apparel with intentionally added PFAS since January 1, 2025, and extends the ban to outdoor apparel for severe wet conditions on January 1, 2028.[20] Don’t read every state PFAS law as a clothing ban: Minnesota’s 2025 list covers textile furnishings, carpets and fabric treatments but not clothing, ahead of its ban on intentionally added PFAS in all products, with exemptions for currently unavoidable uses, from January 1, 2032.[21]

 

In Great Britain, the Textile Products (Labelling and Fibre Composition) Regulations 2012 enforce the retained EU labelling regulation, so the fibre rules match the EU’s today.[22] Chemicals there fall under UK REACH, which is amended separately, so an EU restriction does not automatically apply in Great Britain.

How do you keep track of textile requirements across products and markets?

 

Check each product type against the three layers in each market, starting from the parts list, and check again whenever a change lands.

 

  1. List the components: shell, lining, padding, trims, prints and finishes, with the supplier and material of each.
  2. Set the label per market: composition per component and language, plus the origin, company name or RN and care label for the US.
  3. Test per material: match each material to the Annex XVII entries and the Candidate List, and ask suppliers for reports by material, not one report for the whole garment.
  4. Check the sustainability duties: your company size for the destruction ban, EPR registration as national schemes open, and every environmental claim on tags and web pages.
  5. Watch the sources: Candidate List updates, new Annex XVII entries, the textile delegated act, national EPR laws, the group PFAS restriction, the Commission’s announced revision of the labelling regulation and US state PFAS laws.

 

Step 5 is where teams fall behind, because each change comes from a different body on its own timetable and has to be traced back to the products it touches. Daptic tracks regulatory changes across jurisdictions, flags the ones that affect your products and works out which requirements apply to each product in each market, as shown in a walkthrough of how Daptic matches requirements to products.

Example: a cotton-polyester jacket sold in Germany and the US

 

As an example of applying this to one product, take a jacket made in Asia with a 60% cotton, 40% polyester shell, a polyester lining, a plastisol logo print, a metal zip and a water-repellent finish, imported by a brand.

 

Germany: the brand is the importer, so the label is its job. The label is in German, with shell and lining declared separately, such as “Oberstoff: 60% Baumwolle, 40% Polyester; Futter: 100% Polyester”. The dyes are checked against entry 43, the fabric against entry 72 for formaldehyde, the print against entry 51 and the zip against entry 27. The finish is the trap: a C6 fluorinated repellent is a PFHxA-related substance, and consumer clothing placed on the market since October 10, 2026, must meet entry 79. If the brand is a large company it can’t destroy unsold jackets, and it will pay EPR fees on the jackets it places on the market once Germany’s EPR scheme opens.

 

US: the label reads “Shell: 60% Cotton, 40% Polyester; Lining: 100% Polyester”, with the country of origin on the front of the neck label, the brand name or RN, and a permanent care label. A fluorinated finish keeps the jacket out of California and New York.

Frequently asked questions

Is care labelling mandatory in the EU?

No. EU law requires fibre composition, not care instructions, though any care claim must not mislead consumers; in the US, a permanent care label is mandatory.

Does REACH apply to imported clothing?

Yes. Annex XVII restrictions and the SVHC disclosure duties apply to textile articles placed on the EU market wherever they were made, and the EU importer must meet them.

Who is responsible for the textile label, the factory or the importer?

The manufacturer, or the importer when the manufacturer is outside the EU. A brand that sells under its own name or changes the label is treated as the manufacturer.

When will the digital product passport apply to clothing?

Not yet decided. The Commission plans to adopt the textile delegated act that sets it in Q4 2027, and the application dates will come from that act.

Does the EU ban PFAS in clothing?

Partly. PFHxA and related substances are restricted in consumer clothing placed on the market since October 10, 2026, and PFOA is banned, while a restriction on PFAS as a group sets no limits yet.

Notes and sources

 

  1. Regulation (EU) No 1007/2011 (Textile Labelling Regulation), particularly Articles 2(2), 3(1)(a), 5(1), 7, 9, 11, 12, 14(1), 15, 16 and 20.
  2. Directive 2005/29/EC (Unfair Commercial Practices Directive)
  3. Regulation (EC) No 1907/2006 (REACH), particularly Articles 3(11), 7(2), 33 and 67.
  4. Regulation (EU) 2023/988 (GPSR), particularly Articles 9(6), 11(3), 16 and 52.
  5. Directive 2008/98/EC (Waste Framework Directive), as amended by Directive (EU) 2018/851, particularly Article 1 (new Articles 22a and 22c of Directive 2008/98/EC) and Article 2.
  6. CJEU, Case C-106/14, FCD and FMB
  7. Regulation (EU) 2019/1021 (POPs Regulation)
  8. Regulation (EU) 2024/1781 (ESPR), particularly Articles 4, 9 and 24; Article 25 and Annex VII.
  9. European Commission, “New EU rules to stop the destruction of unsold clothes and shoes” (February 9, 2026)
  10. Directive (EU) 2024/825, particularly Article 1 and Annex, adding points 2a, 4a and 4c to Annex I of Directive 2005/29/EC (Unfair Commercial Practices Directive).
  11. European Commission, “Sustainable consumption”
  12. European Commission, “Digital Product Passport: textile and apparel”
  13. European Commission, “Revised Waste Framework Directive enters into force” (October 16, 2025)
  14. European Parliament, Legislative Observatory, procedure 2023/0085(COD))
  15. 16 CFR part 303 and 16 CFR part 300
  16. FTC, “Threading Your Way Through the Labeling Requirements Under the Textile and Wool Acts”
  17. 16 CFR 423.6, particularly § 423.6.
  18. 19 U.S.C. 1304
  19. California Health and Safety Code, sections 108970 and 108971 (AB 1817, 2022), particularly sections 108970 and 108971 (AB 1817, 2022).
  20. New York Environmental Conservation Law, section 37-0121, particularly section 37-0121.
  21. Minnesota Statutes, section 116.943, particularly section 116.943, subdivision 5.
  22. The Textile Products (Labelling and Fibre Composition) Regulations 2012 (SI 2012/1102)

 

Additional sources:

 

 

This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today