Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

PFAS laws by US state: what applies to manufacturers

See which PFAS laws by state reach your products: bans, reporting and labeling rules, key dates through 2032, and the steps manufacturers take next.
A slate-toned card titled State PFAS Laws listing six checked states and what each requires: Maine, Minnesota, New Mexico, Colorado, Connecticut and Vermont.
November 13, 2026

Marc HaddadMarc HaddadForward Deployed Regulatory Engineer

 

Three US states have PFAS (per- and polyfluoroalkyl substances) laws that reach almost any product with intentionally added PFAS: Maine, Minnesota and New Mexico. Each bans such products from January 1, 2032, unless the state has ruled the use currently unavoidable. Other states, including California, Colorado, Connecticut, New York, Vermont, Washington and Illinois, regulate PFAS only in listed product categories.

 

Key points

 

  • Broad laws: Maine, Minnesota and New Mexico cover nearly every product, commercial and industrial ones included. Each bans intentionally added PFAS in all products from January 1, 2032, unless a “currently unavoidable use” (CUU) ruling applies.
  • Reporting deadlines: Minnesota and New Mexico require reports, and New Mexico’s are due January 1, 2027.
  • Category laws: other states’ laws apply only if your product falls inside a listed category, such as cookware, textiles, cosmetics or cleaning products.
  • State by state: exemptions and CUU relief don’t carry over from one state to another.
  • Federal law: no federal rule bans PFAS in products in general.

What are the PFAS laws by state?

 

State PFAS product laws come in two kinds: broad laws that cover every product, and category laws that cover named product types. Maine, Minnesota and New Mexico have broad laws, and the other states in the table have category laws.

 

Category laws: these name product types and either ban PFAS in them or require a label.

 

Broad laws: these cover every product and end in a general ban, with exceptions for CUU determinations the state makes by rule. Along the way, Minnesota and New Mexico require reports, while Maine requires notice only for CUU products.

 

A CUU determination is a formal state ruling that a particular PFAS use can’t yet be avoided, and without one or an exemption, the 2032 bans apply.

 

The table shows each state’s law, what it restricts or requires you to report, which products it covers and its key dates.

 

State and instrument What is restricted or reported Scope Key dates
Maine, 38 M.R.S. §1614 Category bans, then all products. Notice only for CUU products Any product or component, including commercial and industrial use. Exemptions include motor vehicles, watercraft, semiconductors and nonconsumer electronics (§1614(4)) January 1, 2023: carpets, rugs, fabric treatments. January 1, 2026: cleaning products, cookware, cosmetics, dental floss, juvenile products, menstruation products, textile articles, ski wax, upholstered furniture. January 1, 2029: artificial turf; outdoor apparel for severe wet conditions without a disclosure. January 1, 2032: all other products unless CUU. January 1, 2040: HVAC/R (heating, ventilation, air conditioning and refrigeration) equipment and refrigerants. All adopted
Minnesota, Minn. Stat. §116.943; Minn. R. ch. 7026 Reports for every product; category bans, then all products Any product or component, including industrial use. No motor vehicle exemption January 1, 2025: carpets and rugs, cleaning products, cookware, cosmetics, dental floss, fabric treatments, juvenile products, menstruation products, textile furnishings, ski wax, upholstered furniture (adopted). Annual updates by February 1 each year from February 1, 2027, where something changed in the previous year (adopted). January 1, 2032: all products unless CUU (adopted)
New Mexico, PFAS Protection Act; 20.13.2 NMAC, effective July 1, 2026 Reports, labels, category bans, then all products Products as defined in NMSA 74-15-2. Exemptions include motor vehicles, solid fluoropolymers and non-consumer electronics (20.13.2.10) January 1, 2027: reports due; labels on products manufactured after this date; bans on cookware, food packaging, dental floss, juvenile products, firefighting foam. January 1, 2028: carpets, rugs, cleaning products, cosmetics, fabric treatments, feminine hygiene products, textiles, textile furnishings, ski wax, upholstered furniture. January 1, 2032: all products unless CUU. All adopted
Colorado, HB 22-1345 and SB 24-081 Category bans; cookware label Listed categories January 1, 2024: carpets, rugs, fabric treatments, food packaging, juvenile products, oil and gas products; cookware labeling. January 1, 2025: cosmetics, indoor textile furnishings and upholstered furniture. January 1, 2026: cleaning products, cookware, dental floss, menstruation products, ski wax. January 1, 2027: outdoor textile furnishings and upholstered furniture. January 1, 2028: textile articles, outdoor apparel for severe wet conditions, food equipment intended primarily for commercial settings. All adopted
Connecticut, Conn. Gen. Stat. §22a-903c Label and notify, then ban 12 categories, including apparel, cookware and cleaning products July 1, 2026: labels and notification, with an $800 fee. January 1, 2028: ban, extended to turnout gear and outdoor apparel for severe wet conditions. Adopted
Vermont, 9 V.S.A. §§2494e to 2494i Category bans Turf, juvenile products, residential rugs, ski wax, textiles and others. Textile articles exclude vehicles and their parts January 1, 2026: most categories. July 1, 2027: cleaning products, dental floss. July 1, 2028: cookware (2025 Act No. 54). Adopted
California, Health and Safety Code Category bans; cookware labeling Plant-fiber food packaging, cookware, textile articles, cosmetics January 1, 2023: food packaging. January 1, 2024: cookware labeling. January 1, 2025: textile articles, cosmetics. Adopted. SB 682, a wider ban, was vetoed on October 13, 2025
Washington, WAC 173-337-110 Restrictions and annual reports by category Priority consumer products January 1, 2025: aftermarket treatments, carpets, rugs. January 1, 2026: indoor furniture and furnishings. January 1, 2027: apparel and accessories, automotive washes, cleaning products. January 31, 2027: first reports for cookware and kitchen supplies, footwear, gear, waxes, sealers, firefighting PPE (personal protective equipment). Adopted
New York, ECL §37-0121 Apparel ban Apparel; protective uniforms excluded January 1, 2025: apparel (adopted). January 1, 2028: outdoor apparel for severe wet conditions (adopted). A concentration limit set by regulation is due no later than January 1, 2027; no adopted level confirmed
Illinois, Public Act 104-0231 Category bans Cosmetics, dental floss, juvenile products, menstrual products, intimate apparel January 2032 (adopted)

 

The table isn’t exhaustive.

What counts as PFAS under state law?

 

In Maine and Minnesota, PFAS means any fluorinated organic chemical with at least one fully fluorinated carbon atom.[1, 2] That takes in fluoropolymers such as PTFE (polytetrafluoroethylene) and FEP (fluorinated ethylene propylene).

 

The laws target “intentionally added” PFAS: PFAS put into the product or a component to do a job there.[2, 3] If PFAS is used only during processing and doesn’t remain in the product, the answer can change, so check each state’s definition. State PFAS laws sit alongside the other restricted substances rules that apply to finished products.

 

New Mexico draws the line differently, exempting solid fluoropolymers from its reports and bans but not from labeling.[4]

Who do state PFAS laws apply to?

 

State PFAS laws apply to manufacturers, and if the maker has no US presence, the importer is the manufacturer.[2, 5]

 

  • Industrial products: industrial use is not an exemption in Maine and Minnesota, where a product includes items sold for commercial or industrial use and for making other products.[2, 6]
  • Distributor sales: sales through distributors count in New Mexico.[7]
  • Point of sale: the bans attach at sale, since Maine, Minnesota and New Mexico prohibit the sale, while Connecticut and Washington exclude units made before the effective date.
  • Retailers in Maine: retailers are mostly spared, because the bans reach them only after they have been notified, at the Department of Environmental Protection’s direction, that the sale is prohibited.[8] That leaves the risk with the manufacturer.

 

Category laws add a second test: the same unit can be cookware in one state and not in another.

What are the PFAS reporting and labeling requirements by state?

 

Minnesota and New Mexico require reports on products with intentionally added PFAS, and Washington requires annual reports for some categories. Connecticut requires notification, while Maine requires notice only for CUU products.

 

  • Minnesota: updates are due by February 1 each year from 2027 where something changed in the previous year, and penalties run under Minn. Stat. §116.072.[9]
  • New Mexico: reports are due January 1, 2027, with a $2,500 fee.[10]
  • Washington: first reports are due January 31, 2027, for cookware and kitchen supplies, footwear, gear, waxes, sealers and firefighting personal protective equipment.
  • Connecticut: labels and notification for its 12 categories began July 1, 2026, with an $800 fee.

 

Minnesota requires each PFAS-containing component to be reported under the product name,[9] so a supplier’s “PFAS-free” statement for a finished unit covers nothing below it. You’re expected to keep asking suppliers until you have the answer and to keep records for five years.[11] Where amounts stay unknown, you can report total organic fluorine.[9]

 

Any split of reporting duties across the supply chain must be agreed between the manufacturers and documented.[12, 13]

 

Labels: Connecticut requires labels on its 12 categories, and New Mexico requires them on products manufactured after January 1, 2027. One label can serve both: New Mexico accepts another state’s approved label if you file documentation,[14] and Connecticut has approved the same flask symbol.

How do PFAS exemptions and currently unavoidable use rulings work?

 

Both work state by state: an exemption or CUU approval in one state does nothing for you in another.

 

Maine and New Mexico exempt motor vehicles,[15, 16] but Minnesota doesn’t. Maine’s other exemptions include watercraft, semiconductors and nonconsumer electronics, and New Mexico’s include solid fluoropolymers and non-consumer electronics. Vermont’s textile ban excludes vehicles and their parts.

 

CUU relief has to be requested from each state separately:

 

  • Maine: a CUU product escapes the ban for five years from the CUU rule or from the prohibition date, whichever is later, but still has to be notified.[17]
  • New Mexico: a CUU proposal must reach the department at least 12 months and no more than 60 months before the prohibition, and approvals last three years.[18] For the 2032 ban, that window runs from January 1, 2027, to January 1, 2031. Proposals for the 2027 bans were due October 31, 2026, with decisions by March 1, 2027.

Is there a federal PFAS law for products?

 

No federal rule bans PFAS in products in general. The federal piece is a one-time reporting rule from the Environmental Protection Agency (EPA) under section 8(a)(7) of the Toxic Substances Control Act (TSCA), and it applies alongside the state laws.

 

On October 11, 2023, EPA adopted the rule as 40 CFR part 705. It requires anyone who made or imported PFAS between 2011 and 2022, including PFAS in imported articles, to report it.

 

On April 13, 2026, EPA issued a final rule under which the submission period opens on January 31, 2027, or 60 days after a forthcoming revision takes effect if that comes sooner.

 

On November 13, 2025, EPA proposed exempting imported articles and PFAS at or below 0.1%, but that proposal is not yet final. Whether a federal rule will preempt the state laws isn’t confirmed, though each state’s law exempts products where federal law preempts it.

What do manufacturers have to do?

 

Work product by product and state by state: find the PFAS, map where each product sells, test it against each state’s rules, then report, label and plan for 2032.

 

  1. Find the PFAS: list every PFAS-bearing line on the bill of materials (BOM) with its substance, its function, whether people touch it and whether it stays in the product, and get disclosures for each component.
  2. Map the states: match each SKU to the states it reaches, counting sales through distributors. A SKU (stock-keeping unit) is each version of a product you sell.
  3. Test the definitions: check each SKU against each state’s category definitions.
  4. Apply exemptions: work through them state by state and record the paragraph you rely on.
  5. File the reports: Minnesota’s report and annual update, New Mexico’s report, Washington’s category reports and Connecticut’s notification.
  6. Label: label products in Connecticut’s categories and products for New Mexico.
  7. Plan for January 1, 2032: either substitute or build a CUU case.

 

Steps 2 to 4 don’t stay done, since these lists change every legislative session and through agency rules. Keeping a product line mapped against them is ongoing product compliance work. Daptic tracks those changes across states and works out which state PFAS laws reach each of your products, market by market.

Example: applying state PFAS laws to a contact grill

 

Here’s how the steps work for one product. A US brand imports an electric contact grill in two versions: a residential countertop model sold through retail and online, and a commercial model sold through foodservice distributors. Four parts contain intentionally added PFAS: a PTFE non-stick coating on the cooking plates, a fluoroelastomer seal inside the thermostat housing, FEP-insulated internal wiring and perfluoropolyether (PFPE) grease on the hinge.

 

The residential model is cookware in Minnesota, which defines cookware as “durable houseware items” including grills,[2] and in Maine.[19] It has been banned in Minnesota since January 1, 2025, and in Maine since January 1, 2026. A PFAS-free coating would clear Minnesota, because the remaining PFAS would sit only in internal components,[2] but it wouldn’t clear Maine, whose 2026 list has no internal-component exception.

 

In New Mexico, the coating, seal and wiring are solid fluoropolymers, exempt from reporting and the bans.[4] The PFPE grease isn’t solid, and the labeling section has no fluoropolymer exemption.

 

The commercial model isn’t houseware, so the cookware bans don’t reach it. It is still inside Minnesota’s reporting, all three 2032 bans and Colorado’s 2028 ban on food equipment intended primarily for commercial settings. In New Mexico, it counts as a “complex durable good,” so the PFAS label goes on the specification sheet and in the manual.[20]

Frequently asked questions

Which states ban PFAS in all products?

Maine, Minnesota and New Mexico each ban products with intentionally added PFAS from January 1, 2032, unless the state has ruled that the use is currently unavoidable.

Do state PFAS laws apply to industrial products?

Yes, the broad laws in Maine, Minnesota and New Mexico reach products sold for commercial and industrial use. Maine and New Mexico exempt non-consumer electronics, but Minnesota doesn’t.

Does PTFE count as PFAS?

Yes, in Maine and Minnesota, whose definitions take in fluoropolymers such as PTFE. New Mexico exempts solid fluoropolymers from its reports and bans, but not from labeling.

When is the Minnesota PFAS reporting deadline?

Annual updates are due by February 1 each year from 2027 where something changed.

Is there a federal ban on PFAS in products?

No federal rule bans PFAS in products in general. The federal requirement is EPA’s one-time TSCA reporting rule, whose submission period opens no later than January 31, 2027.

Notes and sources

 

  1. 38 M.R.S. §1614(1)(F).
  2. Minn. Stat. §116.943 and Minn. R. ch. 7026, particularly subd. 1(q); subd. 1(l); subd. 1(o); subd. 1(r); subd. 1(h); subd. 5(b).
  3. 38 M.R.S. §1614(1)(D).
  4. 20.13.2.10(P) NMAC.
  5. 38 M.R.S. §1614(1)(E).
  6. 38 M.R.S. §1614(1)(G).
  7. 20.13.2.9 NMAC.
  8. 38 M.R.S. §1614(5)(G) and (8)(B).
  9. Minn. R. 7026.0030.
  10. 20.13.2.16 NMAC.
  11. Minn. R. 7026.0080.
  12. Minn. R. 7026.0020.
  13. 20.13.2.12(A) NMAC.
  14. 20.13.2.13(E) NMAC.
  15. 38 M.R.S. §1614(4)(I).
  16. 20.13.2.10(G) and (H) NMAC.
  17. 38 M.R.S. §1614(5)(F).
  18. 20.13.2.11 NMAC.
  19. 38 M.R.S. §1614(1)(A-10).
  20. 20.13.2.13(D) NMAC.

 

Additional sources:

 

 

This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today