Product certification marks by country: CE, UKCA, CCC, PSE, KC, BIS and more

Marc HaddadForward Deployed Regulatory Engineer
Product certification marks, including CE (EU), UKCA (Great Britain), CCC (China), PSE (Japan), KC (South Korea) and India’s BIS marks, show that a product has completed one market’s conformity procedure. Under CE and UKCA, the manufacturer usually declares conformity itself. Under CCC, KC safety certification and India’s ISI licence, a designated body tests samples and inspects the factory before sale.
Key points
- Earned, not bought: you can’t buy a certification mark. You earn it by completing one market’s procedure, and only the party the law names may put it on the product.
- Who proves conformity: marks differ mainly in whether the manufacturer proves conformity itself or a designated body tests and inspects first. That second route can move a launch by months.
- What a mark covers: each mark covers specific products and specific hazards, and other rules, such as radio approvals or US flammability standards, can sit alongside it. The US has no single general product mark.
- Scope lists move: China is moving 16 products from self-declaration to third-party certification, with a CCC certificate and mark required from January 1, 2027.
What is a product certification mark?
A certification mark is what goes on a product to say it passed a market’s conformity procedure, the process for showing the product meets that market’s rules. Every market that regulates product safety decides which products are in scope, how conformity must be shown, and what goes on the product to say it was shown. The mark covers only that last part.
A mark is a statement, not an approval: the CE marking, for example, is the manufacturer’s statement that the product met EU requirements when it was placed on the market. The European Commission states that it doesn’t mean any authority has approved the product as safe, and that it says nothing about where the product was made.
Because each country writes its own scope lists and procedures, a product picks up its marks one market at a time, and each mark is one part of what product compliance covers.
Is a certification mark self-declared or certified by a third party?
It depends on the market and the product: there are three routes, and most schemes mix them.
- Self-declaration: the manufacturer or local importer tests the product or has it tested, keeps the technical file (the documents and test results that show conformity), signs a declaration of conformity and affixes the mark. Examples include CE for most products, UKCA, PSE for non-specified items, Korea’s supplier’s declaration of conformity, and the US Federal Communications Commission (FCC) Supplier’s Declaration of Conformity (SDoC).
- Mandatory third-party certification: a designated or accredited body tests the product, often inspects the factory, and then issues a certificate before sale. Examples include CCC, KC safety certification, India’s ISI mark, Japan’s specified items and Australia’s Level 3 equipment.
- Registration or licensing: the certificate or declaration also has to be registered with the authority, or the mark is used under a licence held by a named party. Examples include India’s Compulsory Registration Scheme (CRS), Australia’s Electrical Equipment Safety System (EESS) register and Saudi Arabia’s SABER platform.
CE, for example, needs a notified body, an outside assessment body named under the EU rules, for higher-risk products, while China’s CCC catalogue contains self-declared items.
Which certification mark do I need to sell in each country?
You need a market’s mark when your product is on that market’s scope list, and where it sits on the list sets the route. The main marks are CE, UKCA (UK Conformity Assessed), CCC (China Compulsory Certification), Japan’s PSE, Korea’s KC and India’s two Bureau of Indian Standards (BIS) schemes.
In the table, SAMR is China’s State Administration for Market Regulation, METI is Japan’s Ministry of Economy, Trade and Industry, and MeitY is India’s Ministry of Electronics and Information Technology.
This table shows what each main mark covers, how conformity is shown, who certifies or affixes it, and what local party, audit or timing to expect.
| Mark and market | What it covers | Route | Who certifies or affixes | Local party, factory audit, timing |
|---|---|---|---|---|
| CE: EU and the wider European Economic Area (EEA) | Products under EU harmonisation acts that require it (acts aligned with Decision 768/2008/EC) | Self-declaration, or a notified body where the act requires one | The manufacturer affixes it. Where a notified body is involved, its identification number appears next to CE | No audit on the self-declaration route. Technical documentation kept for at least 10 years |
| UKCA: Great Britain | The same product areas. CE is also accepted with no end date under 21 product regulations (Product Safety and Metrology etc. (Amendment) Regulations 2024, in force since October 1, 2024) | Mirrors CE, with UK approved bodies | Manufacturer | Medical devices, construction products, marine, rail, cableways, transportable pressure equipment and uncrewed aircraft have their own arrangements |
| UKNI: Northern Ireland | Products that must be third-party assessed by a UK-based body under EU rules | Always used with CE, never on its own | UK body | n/a |
| CCC: China | Catalogue products: 16 categories, 100 products (SAMR, April 8, 2024) | Mostly type testing by a designated laboratory plus a factory inspection (Articles 8, 13 and 15). Some catalogue items are self-declared | Certification bodies designated by SAMR. Certificate normally within 90 days of an accepted application (Article 16), valid for five years (Article 22) | The applicant can be the producer, seller or importer (Article 10). Inspections are done by registered inspectors |
| PSE: Japan | Electrical appliances and materials under the Electrical Appliances and Materials Safety Act (Act No. 234 of 1961) | Non-specified items: conformity to technical standards plus inspection records (Article 8). Specified items: also a certificate from a registered conformity assessment body before sale (Article 9) | The notifying supplier affixes the mark (Article 10). | The notifying supplier is a manufacturer or importer that notifies METI within 30 days of starting business (Article 3) |
| KC: South Korea | Electrical appliances and consumer products, in three tiers: safety certification (Article 5), safety confirmation (Article 15), supplier’s declaration of conformity (Article 23) | Certification: model testing plus factory assessment. Confirmation: testing by a designated lab, then a report to the ministry. Supplier’s declaration: own testing | Certification bodies and designated testing labs | Applies to foreign manufacturers exporting to Korea (Article 5(1)). Certified factories are inspected once every two years (Article 7(1)) |
| ISI mark (BIS Scheme I): India | Products under Quality Control Orders (QCOs) | Licence granted after a factory visit and independent testing of samples | BIS. Foreign makers apply through the Foreign Manufacturers Certification Scheme (FMCS) | Nominating an Authorised Indian Representative (AIR) is a step in the process. US$10,000 bank guarantee |
| BIS registration (CRS): India | Electronics and IT product entries under the Electronics and IT Goods (Requirements for Compulsory Registration) Order, 2021, last amended September 21, 2026 | Registration with BIS on a self-declaration of conformity | BIS | Separate from Scheme I. Electronics and IT goods notified by MeitY are excluded from FMCS |
What marks do the US, Canada, Australia and other markets use?
Each of the markets below runs its own scheme, except the United States, which has no single general product mark. US requirements split by regulator and product category: the FCC, the Consumer Product Safety Commission (CPSC) and workplace electrical rules each work differently, as the list after the table shows.
This table summarises the Eurasian Economic Union, Saudi Arabia, Australia, the United States, Brazil, Mexico and Canada.
| Mark or scheme | Market | How it works |
|---|---|---|
| EAC | Eurasian Economic Union: Armenia, Belarus, Kazakhstan, Kyrgyzstan, Russia | Union technical regulations require conformity assessment and the EAC mark before goods are released onto the Union market. Russian customs check for the mark at release; the other members don’t (Eurasian Economic Commission, May 8, 2019). |
| SABER | Saudi Arabia | Regulated products need a product certificate of conformity, registered on SABER, plus a shipment certificate for each consignment. |
| RCM | Australia | Level 3 in-scope electrical equipment needs a certificate from a recognised certifier and registration by a Responsible Supplier, which must be the Australian or New Zealand manufacturer or importer of the equipment. The Regulatory Compliance Mark (RCM) is applied to AS/NZS 4417.1. The Australian Communications and Media Authority (ACMA) uses the same mark for its own requirements. |
| No general mark | United States | FCC equipment authorization is either certification by the FCC or a Telecommunication Certification Body (47 CFR 2.907) or an SDoC with a responsible party located in the US (2.906, 2.1077). The FCC logo is optional (2.1074(b)). For CPSC-regulated consumer products, the importer or domestic manufacturer issues a certificate, filed electronically at entry for imports, and no mark is required (16 CFR 1110.5, 1110.7, 1110.13). Electrical equipment in workplaces must be “approved” (29 CFR 1910.303(a)), which in practice means listing by a nationally recognized testing laboratory (NRTL) such as UL or ETL. |
| Inmetro | Brazil | Product-specific conformity requirements sit on top of the general rules for certification or for a supplier’s declaration. Inmetro registration applies where the product rules require it. |
| NOM | Mexico | Ley de Infraestructura de la Calidad (Official Journal, July 1, 2020) and its Reglamento (Official Journal, September 4, 2026). A self-declared product carries “CONFORME A LA NOM” with the standard’s number and the issuing authority’s initials. A third-party route uses the certification body’s mark registered with IMPI, Mexico’s industrial property office (Reglamento, Article 13). |
| cUL, cETL, CSA and others | Canada | Electrical products that plug into an outlet must be certified by an accredited certification body (Health Canada). The Standards Council of Canada (SCC) publishes the list of recognised marks. |
| Mandatory standards | Australia | Goods such as toys, baby and toddler products, button batteries and toppling furniture must meet the ACCC’s mandatory standards. These make safety or information features compulsory, and supplying goods that don’t comply is an offence. |
| Toys Regulations | Canada | Toys must meet the Canada Consumer Product Safety Act and the Toys Regulations, and the onus to comply is on industry. Health Canada says pre-market testing isn’t mandated but should be done, and provincial law requires electric toys to carry a certification mark. |
In the United States, what a product needs depends on its category:
- Every product under a CPSC rule: the finished product needs a certificate, issued by the importer for imports and by the manufacturer for products made in the US.[1]
- Electrical and electronic products, radio included: devices under the FCC rules need equipment authorization, as the table shows, and electrical equipment used in workplaces must be approved, usually through NRTL listing.
- Children’s products and toys: samples must be tested by a CPSC-accepted third-party laboratory, and that testing supports a Children’s Product Certificate.[1] Toys must also meet ASTM F963-23.[1]
- Machinery: OSHA’s electrical rules cover utilization equipment used in workplaces, meaning equipment that uses electricity for electromechanical and similar purposes, so the approval rule reaches powered machines used at work.[1]
- Textiles and furniture: fabric for clothing must meet the federal flammability standard for clothing textiles.[1] Upholstered seating must meet California TB 117-2013 and carry a permanent label saying it complies with CPSC flammability requirements.[1]
- Products with batteries: consumer products that contain or use button or coin cell batteries must meet UL 4200A and carry set warnings on their packaging and labels.[1]
Where does the certification mark go on the product?
Each market sets its own size and placement rules, and some reach packaging and paperwork too.
- CE: visible, legible and indelible, and on the product where possible.
- UKCA: until 11pm on December 31, 2027, the mark can go on a label or an accompanying document instead of the product.
- CCC: the holder must apply the mark correctly on products, packaging and promotional material.[2]
- RCM: generally on the outside of the equipment, close to the model identification.
- NOM: must stay on the product or its packaging from import through to sale.
Does one certification mark cover everything a product needs?
In the EU and Great Britain, one CE or UKCA marking covers every act that applies; elsewhere, separate approvals often sit alongside the main mark. A product carries CE only where a harmonised EU rule mandates it, and if none does, CE must not be used and general product safety rules apply.
- Electrical and electronic products, radio included: the Great Britain list includes RoHS (restriction of hazardous substances) and ecodesign alongside electrical safety and radio. Japan’s Radio Act has its own certification,[3] and Korea runs radio conformity assessment under its Radio Waves Act.[4] In the US, FCC authorization says nothing about electrical safety. Energy and environmental labels are separate again.
- Children’s products and toys: toys carry CE in the EU. In the US they carry no general mark, and third-party testing and a Children’s Product Certificate do that job instead.[1]
- Machinery: machinery carries CE, under the Machinery Directive until Regulation (EU) 2023/1230 replaces it on January 20, 2027.[5]
- Textiles and furniture: where no specific EU rule covers a risk, the General Product Safety Regulation does, and it has applied since December 13, 2024.[5] In the US, upholstered seating carries its own flammability label rather than a certification mark.[1]
- Cosmetics: in the EU, cosmetics follow their own regulation, under which a designated responsible person notifies each product to the Commission electronically before it goes on the market.[5]
- Products with batteries: in the EU, the battery carries its own CE marking under the Battery Regulation, on the battery or, where that isn’t possible, on its packaging and documents.[5] The US button and coin cell rules are listed above.
Marks also attach to the model, not its parts: Korea certifies “each model”,[6] so a certified power supply inside an appliance doesn’t certify the appliance.
Can a foreign manufacturer self-declare a certification mark?
Under CE, yes, since a manufacturer anywhere can declare. Most markets still want a local party behind the product, and in several the self-declaration itself has to come from one.
- Products in general: in the EU, a consumer product, or a product under CE acts such as those for toys, machinery and radio equipment, needs an economic operator established in the EU, such as an importer or authorised representative.[5] In the US, the importer issues the certificate for an imported product under a CPSC rule.[1]
- Electrical and electronic products, radio included: in Japan, PSE is affixed by a notifying supplier, meaning a manufacturer or importer that has notified METI.[7] In Australia, the Responsible Supplier must be an Australian or New Zealand entity, and in the US, an FCC SDoC needs a responsible party in the US.
- Children’s products and toys: in the US, the certificate must rest on testing by a CPSC-accepted third-party laboratory, so the maker’s own tests aren’t enough.[1]
- Machinery: from January 20, 2027, machinery in the EU’s higher-risk categories must follow one of the stricter procedures the Machinery Regulation sets, which involve a notified body.[5]
- Cosmetics: for an imported cosmetic, each importer is the responsible person unless it designates, by written mandate, another person established in the EU.[5]
A foreign maker’s “self-declaration” therefore often depends on an importer or representative it doesn’t control.
How often do certification requirements change?
Often enough that a product classified for one launch can need a different route by the next. Scope changes through announcements: China’s CCC catalogue and certification modes, India’s QCOs and CRS amendments in the Gazette, and Australia’s equipment levels. Our guide on how to track regulatory changes covers watching announcements like these across many countries.
On January 7, 2026, China published SAMR Announcement No. 57 of 2025, dated December 28, 2025, which moves 16 catalogue products from self-declaration to third-party certification, including fuses, small motors, drills, angle grinders and several vehicle parts. Certification bodies began accepting applications on July 1, 2026, conversion must be finished by December 31, 2026, and a CCC certificate and mark are required from January 1, 2027.
In 2026, India’s CRS list was amended on March 10, May 5 and September 21, with timeline extensions on January 22, July 26 and October 17. Keeping up with this across every market you sell in is ongoing work, and Daptic follows scope-list changes like these and works out which marks and certification routes apply to your product in each market.
On October 21, 2026, the UK government announced that it will keep accepting CE marking on medical devices long-term, but it did not name the legal instrument or say when this takes effect. Recognition decisions like this change too, and Great Britain accepts CE with no end date for 21 regulations. New implementing rules, such as Mexico’s Reglamento of September 4, 2026, change how the marks are used.
How do you work out which certification marks your product needs?
Classify the product market by market, then plan around the slowest route.
- Classify the product: check it against each market’s general scope lists, such as the CCC catalogue, the KC tiers and India’s QCOs. Each list classifies by product, not by company, and in the EU a product needing no CE still falls under general product safety rules. Then add the lists for its category:
- Electrical and electronic products: the PSE specified and non-specified lists, the Indian CRS list, the EESS level and each market’s radio rules.
- Children’s products and toys: the EU toy rules, US third-party testing and ASTM F963, Canada’s Toys Regulations and Australia’s mandatory standards.
- Machinery: the EU machinery rules, including the higher-risk categories that need a notified body, and US workplace electrical approval.
- Textiles, furniture, cosmetics and batteries: US flammability and button battery rules, Australia’s mandatory standards, EU cosmetics notification and EU battery CE marking.
- Name the route and the party: for each market where the product is in scope, decide whether the route is self-declaration, third-party certification or registration, and who has to hold it, whether the foreign maker, a local importer, a Responsible Supplier or an AIR.
- Plan around the slowest regime: add any parallel regimes, such as radio and energy approvals for electronics or flammability rules for furniture and clothing. Factory audits and in-country testing set your launch date, so plan around the slowest one.
Our neighbouring guides cover working out which regulations apply in the first place and the full step-by-step checklist for entering a market. Food, drug and medical device marks follow separate regimes and aren’t covered here.
Example: one appliance, six markets
Here is how the steps played out in a composite example. A maker of a mains-powered countertop appliance with a built-in Wi-Fi module planned to launch in the EU, Great Britain, China, Japan, Korea and India on one schedule, and assumed its EU test reports would carry over everywhere.
- EU: CE by self-declaration, with one declaration covering every act that applied, including the radio rules.
- Great Britain: the existing CE marking, recognised under the Electrical Equipment (Safety) Regulations 2016 and the Radio Equipment Regulations 2017.
- Japan: as a non-specified item, the Japanese importer affixed PSE as notifying supplier, but the Wi-Fi module needed its own Radio Act certification.
- Korea: safety certification with a factory assessment, plus a separate radio conformity assessment.
- China: CCC type testing at a designated laboratory and a factory inspection.
- India: the product was covered by a QCO, so it needed an FMCS licence: a BIS factory visit, sample testing and a bank guarantee.
The lead time sat in India and China, not Europe, and the EU reports, while useful engineering evidence, replaced none of the designated testing.
Frequently asked questions
What does the CE mark mean?
The CE marking is the manufacturer’s statement that a product met EU requirements when it was placed on the market. The European Commission states that it doesn’t mean any authority approved the product as safe, and it says nothing about where the product was made.
Is CE marking still accepted in Great Britain?
Yes, for 21 product regulations with no end date, under the Product Safety and Metrology etc. (Amendment) Regulations 2024, which came into force on October 1, 2024. Medical devices, construction products and several other sectors have their own arrangements.
Does the United States have a product certification mark?
No, the US has no single general product mark. FCC authorization carries an optional logo, CPSC-regulated consumer products need a certificate but no mark, and workplace electrical equipment must be “approved”, which in practice means listing by an NRTL such as UL or ETL.
How long does CCC certification take?
A CCC certificate is normally issued within 90 days of an accepted application and is valid for five years. Most catalogue products need type testing at a designated laboratory and a factory inspection first.
Do I need a BIS certificate to sell in India?
You do if your product is under a Quality Control Order or on the CRS list. QCO products need an ISI licence after a factory visit and sample testing. The CRS electronics and IT entries need registration on a self-declaration of conformity.
Is a test report the same as a certificate?
No, a test report is evidence. Where a third party controls access to the market, as with CCC, specified PSE items and Australian Level 3 equipment, the certificate is what lets you sell.
Notes and sources
- eCFR: 47 CFR 2.906, 2.907, 2.1074, 2.1077; 16 CFR part 1110; 29 CFR 1910.303; 16 CFR 1107.20; 16 CFR part 1250; 16 CFR part 1263; 16 CFR part 1610; 16 CFR part 1640; 29 CFR 1910.302 and 1910.399, particularly § 1110.5; § 1107.20(a); § 1250.2(a); § 1910.302(a)(1); § 1610.1(e); § 1640.4(b); § 1263.3.
- SAMR, Regulations on Compulsory Product Certification; Announcement No. 57 of 2025; CCC catalogue coverage, April 8, 2024, particularly Article 32.
- Radio Act (Japan), Chapter III-2, Article 38-7.
- Radio Waves Act (Korea), Article 58-2.
- EUR-Lex: Regulation (EU) 2019/1020; Regulation (EU) 2023/988; Regulation (EU) 2023/1230, consolidated text; Regulation (EU) 2023/1542; Regulation (EC) No 1223/2009, consolidated text, particularly Articles 2(1), 4, 6(1), 13(1), 16(1), 20(1), 25(2), 52 and 54; Articles 51(2) and 54 (consolidated text).
- Korea, Electrical Appliances and Consumer Products Safety Control Act; MOTIE explainer on the KC mark, May 29, 2025; National Radio Research Agency, conformity assessment, particularly Article 5(1).
- Japan, Electrical Appliances and Materials Safety Act; Regulation for Enforcement; Radio Law, particularly Article 10(2).
Additional sources:
- European Commission, CE marking and CE marking: manufacturers; Your Europe, CE marking
- GOV.UK, Using the UKCA marking, Using the UKNI marking, Placing manufactured goods on the market in Great Britain, CE-marked medical devices, October 21, 2026
- BIS, Scheme I, Scheme II (CRS), FMCS overview, FMCS grant of licence
- Eurasian Economic Commission, EAC marking consultation, May 8, 2019
- SASO and SABER: certificate registration service, SABER
- EESS, Level 3 and Marking of electrical equipment
- ACCC, Mandatory standards
- Inmetro, registration legislation
- Mexico, Reglamento de la Ley de Infraestructura de la Calidad, DOF September 4, 2026; Ley de Infraestructura de la Calidad
- Health Canada, Electrical product safety; Industry guide to Canadian safety requirements for children’s toys and related products
- Last reviewed: November 9, 2026
This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.



