Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

EU declaration of conformity: what it must include, with a template

What an EU declaration of conformity must include, which products need one, who signs it, how long to keep it, and a template you can fill in.
A product-style card titled EU Declarations of Conformity above two declaration cards, one for a connected countertop oven and one for machinery, on slate gradient columns.
November 12, 2026

Marc HaddadMarc HaddadForward Deployed Regulatory Engineer

 

An EU declaration of conformity is the manufacturer’s signed statement that one product model meets every EU act that applies to it. It names the product, the manufacturer, each applicable act and the standards applied. The manufacturer or its EU authorised representative signs it, and a test lab or notified body cannot sign it for you.

Key points

 

  • A separate document: the declaration is separate from the CE marking, the technical documentation and any test report, and it must exist before the product is placed on the market.
  • One model, no single form: Decision No 768/2008/EC sets the pattern, and each sector law fixes its own version in an annex.
  • One declaration for several acts: a product covered by several acts gets a single declaration that names all of them, each with its Official Journal reference.
  • Start from the product: build the legislation list from the product, not from last year’s declaration. The faults that keep coming up are repealed directives, superseded standard editions, missing acts and the wrong model variant.

What is an EU declaration of conformity?

 

It is a signed page stating that a product model meets the EU acts listed on it. Of the four documents below, it is the only one that puts a named person’s signature behind compliance.

 

People mix up four documents:

 

  • CE marking: the sign on the product.
  • Declaration of conformity: the signed page stating that the product model meets the listed EU acts.
  • Technical documentation: the evidence behind it, which you keep for authorities and don’t hand to customers.
  • Test report: one piece of that evidence, issued by a lab against specific standards.

 

The model comes from Decision No 768/2008/EC, the EU’s common framework for product legislation.[1] The Decision is addressed to lawmakers, not to you. Article R10 of its Annex I and the model in its Annex III were copied into each sector act, and your obligations come from those acts. That is why the Decision leaves the retention period as a bracketed placeholder, “[period to be specified…]”, and the acts fill it in.[1]

Which products need an EU declaration of conformity?

 

Products covered by EU harmonisation acts need one. These are laws that set common requirements for a product group across the EU, and which ones apply depends on what the product is.

 

Not every product gets one. The General Product Safety Regulation (EU) 2023/988, or GPSR, asks manufacturers for an internal risk analysis and technical documentation kept for 10 years, but no declaration and no CE marking.[2]

 

What each category adds:

 

  • Electrical and electronic products, radio included: the Low Voltage Directive, the Electromagnetic Compatibility (EMC) Directive, the Radio Equipment Directive (RED) and the Restriction of Hazardous Substances (RoHS) Directive.
  • Toys: the Toy Safety Directive 2009/48/EC covers products designed or intended for play by children under 14, and requires a declaration on the model in its Annex III.[3]
  • Machinery: the Machinery Directive 2006/42/EC, replaced by the Machinery Regulation (EU) 2023/1230 from January 20, 2027.
  • Batteries: the Batteries Regulation (EU) 2023/1542 requires the battery’s manufacturer to draw up an EU declaration of conformity for the battery.[4]
  • Products under an ecodesign rule: products covered by a delegated act under the Ecodesign Regulation (EU) 2024/1781 need a declaration on that Regulation’s own model.[5]
  • Cosmetics: the Cosmetics Regulation (EC) No 1223/2009 works differently. Instead of a declaration, a responsible person in the EU keeps a product information file for ten years and notifies the product before it goes on sale.[6]
  • Textiles and furniture: a plain garment or sofa falls under none of the acts above, so the GPSR applies and there is no declaration. A motor, mains power or a battery can bring one in.

Who signs the EU declaration of conformity?

 

The manufacturer signs it, or an authorised representative established in the EU signs on its behalf, according to the Blue Guide, the European Commission’s guidance on EU product rules.[7] Either way, the Low Voltage Directive 2014/35/EU and the Radio Equipment Directive 2014/53/EU say that by drawing it up, “the manufacturer shall assume responsibility” for compliance.[8, 9]

 

Importers keep a copy available to market surveillance authorities, the national bodies that check products on sale.[1] The Blue Guide also says notified bodies, the independent assessment bodies some procedures require, “are not responsible for providing the EU Declaration of Conformity”.[7] Labs and notified bodies issue reports and certificates, while the manufacturer signs the declaration and carries the responsibility.

What must an EU declaration of conformity include?

 

It must identify the product and manufacturer, carry a fixed responsibility statement, list each act and standard applied, record any notified body involvement, and be signed and dated. The declaration is drawn up “for a product model” and must identify the product it covers.[8]

 

The table below shows each field of the model, what goes in it, and where the sector acts differ.

 

Field What goes in it Where the acts differ
Title and number “EU declaration of conformity,” with your own reference number if you want one Numbering is optional (Low Voltage Directive, Annex IV; RED, Annex VI)
1. Product Product, type, batch or serial number Machinery Regulation adds model, and covers substantially modified machinery (Annex V, Part A, point 1)
2. Manufacturer Name and address, plus the authorised representative where one acts Machinery Directive 2006/42/EC also requires the person authorised to compile the technical file, established in the EU (Annex II, 1.A, point 2). The Regulation’s model has no such field
3. Responsibility “This declaration of conformity is issued under the sole responsibility of the manufacturer.” Fixed wording
4. Object of the declaration Identification allowing traceability: commercial name, model and the variants covered A colour image may be added where needed (Low Voltage Directive, RED, Machinery Regulation)
5. Legislation “The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:” then each act by number, title and Official Journal reference The publication reference is required wherever one declaration covers several acts
6. Standards and specifications Each harmonised standard or other specification applied, with its number and edition RED: “identification number and version and, where applicable, date of issue” (Annex VI, point 6). Machinery Regulation: the date, and which parts, where a standard was applied only in part (Annex V, Part A, point 7)
7. Notified body Name, number, what it did and the certificate it issued, or “not applicable” Machinery Regulation also names the module used (Annex V, Part A, point 8)
8. Accessories and software Components and software that let the equipment work as intended RED only (Annex VI, point 8)
9. Additional information Anything useful beyond the minimum The acts set minimum content only (Blue Guide, section 2.11)
Signature block Signed for and on behalf of; place and date of issue; name, function and signature Machinery Directive: typewritten or handwritten in capitals (Annex II, Part 1)

 

Laid out as a page, the template looks like this, but check the annex of each act you declare against for its exact fields.

 

“`
EU declaration of conformity No. [your reference, optional]

 

  1. Product: [product, type, batch or serial number]
  2. Manufacturer: [name and address]

 

Authorised representative: [name and address, where one acts]

 

  1. This declaration of conformity is issued under the sole

 

responsibility of the manufacturer.

 

  1. Object of the declaration: [commercial name, model, variants covered]
  2. The object of the declaration described above is in conformity

 

with the relevant Union harmonisation legislation:
[act number, title, Official Journal reference]

 

  1. Standards and specifications: [number and edition of each]
  2. Notified body: [name, number, what it did, certificate]

 

or “not applicable”

 

  1. Accessories and software: [radio equipment only]
  2. Additional information: [optional]

 

Signed for and on behalf of: [manufacturer]
[place and date of issue]
[name, function] [signature]
“`

Do you need a separate declaration for each directive?

 

No. Where more than one act requiring a declaration applies, “a single EU declaration of conformity shall be drawn up,” naming each act with its publication reference.[8–11] The Blue Guide accepts a dossier of the individual declarations as that single declaration.[7]

How do you write an EU declaration of conformity?

 

Start from the product, not from an old declaration.

 

  1. Map the product: list what it does, what it contains and who it is for, such as mains power, a radio, a battery, moving parts or play by children under 14.
  2. Match the acts: attach an act to each feature, and check where one act excludes another (see the section on overlapping acts below).
  3. List the standards: for each act, list the standards you applied, in the edition cited under that act.
  4. Record notified body work: note what any notified body did, or write “not applicable.”
  5. Name the variants: identify the model and every variant the declaration covers.
  6. Fill in and sign: complete the fields, then sign and date it.
  7. Translate it: put it into the language or languages required by the Member State where the product is placed or made available on the market.[8, 9, 11]
  8. File and deliver: file it for the retention period and decide how it reaches the customer.

How long do you have to keep a declaration of conformity?

 

Keeping it for 10 years after the product is placed on the market is common, but each act sets its own period.[8–10, 12] The Machinery Regulation says “at least 10 years,” and digital declarations must stay online for the machine’s expected lifetime.[11]

Does the declaration have to ship with the product?

 

It depends on the act. Every act that requires a declaration also requires you to keep it for the authorities, and some require it to travel with the product or be reachable from it.

 

  • Electrical and electronic products: the Low Voltage and EMC Directives require you to keep it available and provide it on request.
  • Radio equipment: it must be accompanied by a copy or by the simplified declaration in Annex VII, which ends with “The full text of the EU declaration of conformity is available at the following internet address”.[9]
  • Machinery: under the Machinery Regulation, you can supply the declaration itself or give its internet address or machine-readable code in the instructions.[11]
  • Batteries: from February 18, 2027, batteries must carry a QR code, which for many battery types gives access to the declaration.[4]
  • Toys: the Toy Safety Directive requires you to keep it for 10 years after the toy is placed on the market.[3] From August 1, 2030, a digital product passport replaces the toy declaration.[13]
  • Cosmetics, and textiles or furniture under the GPSR alone: there is no declaration, so nothing ships.

Which act covers each requirement when acts overlap?

 

Some acts take over a requirement from another act or exclude products another act covers. The same feature can therefore sit under a different entry depending on the category.

 

  • Radio equipment: the RED entry covers safety and EMC as well as radio. The RED carries the Low Voltage Directive’s safety objectives “with no voltage limit” and the EMC requirements,[9] and the EMC Directive excludes equipment covered by the radio law.[10] The safety and EMC standards therefore sit under the RED entry, mapped to Article 3(1)(a) and (b). Since August 1, 2025, Delegated Regulation (EU) 2022/30 has also brought the Article 3(3)(d), (e) and (f) cybersecurity requirements to many internet-connected radio products, so it belongs on the legislation line.
  • Machinery: from January 20, 2027, the Machinery Regulation excludes certain electrical products where the Low Voltage Directive or the RED covers them.[11] They are household appliances, audio and video equipment, IT equipment, ordinary office machinery other than 3D printing machinery, low-voltage switchgear and control gear, and electric motors. The household appliance exclusion does not reach electrically operated furniture.
  • Toys: the Low Voltage Directive starts at 50 volts AC or 75 volts DC,[8] and the toy law caps toys at 24 volts DC or the AC equivalent.[3] An electric toy’s electrical safety therefore sits under the toy entry.
  • Products with batteries: the battery has its own declaration under the Batteries Regulation, drawn up by the battery’s manufacturer.[4]

Which standard edition should the declaration cite?

 

Cite the edition listed under the act you declare against, and respect any restriction attached to it. A harmonised standard, meaning a European standard cited under an act, gives presumption of conformity, so products that meet it are presumed to meet the requirements it covers. That presumption holds only for the cited edition and only within any restriction.

 

What a restriction or a skipped standard changes depends on the category:

 

  • Radio equipment: Implementing Decision (EU) 2025/138 cited EN 18031-1:2024 for RED Article 3(3)(d), with a notice that it “does not confer a presumption of conformity” where the user may skip setting a password. Where harmonised standards for Article 3(2) or (3) are not applied, or only in part, the RED requires a notified body procedure for those requirements, which changes field 7.[9]
  • Toys: the toy must go through EC-type examination where harmonised standards don’t exist, aren’t applied, are applied only in part or were published with a restriction, which also changes field 7.[3]
  • Machinery: under the Machinery Regulation, where a standard was applied only in part, the declaration must specify the parts applied.[11]

 

Standard citations change every year, and a declaration “must be kept up to date” when a standard version changes for products placed on the market after that point.[7] Keeping each model’s legislation and standards lines current is where declarations fall behind, and Daptic tracks changes to EU acts and the standards cited under them and flags which of your product models each change reaches, so the person who signs hears about a new edition or restriction before the next declaration goes out.

Does one declaration cover every variant of a product?

 

Only the variants it names, because a declaration covers the product it identifies. A variant with a different radio module, motor or power supply can fall under a different act or standard, so it needs to be named in the object of the declaration or get its own declaration.

What changes for machinery on January 20, 2027?

 

From January 20, 2027, machines placed on the market need a declaration under the Machinery Regulation (EU) 2023/1230, with Annex V content. The date was corrected in the Official Journal on July 4, 2023.[11] On that date the Regulation applies and Directive 2006/42/EC is repealed. The field for the person who compiles the technical file goes, and where a standard is applied only in part, the declaration must specify the parts applied.

What are the most common mistakes?

 

Treating the declaration as something another document or another party covers.

 

  • “The CE mark is our declaration”: no, the marking is applied once compliance is shown and the declaration drawn up, and each is a separate obligation.[1]
  • “We only need it if an authority asks”: no, it must exist before the product is placed on the market. Under the RED and the machinery laws it also travels with the product, though the RED allows a simplified declaration and the Machinery Regulation allows its internet address or machine-readable code instead.
  • “Our lab or notified body issues the declaration”: no, they issue reports and certificates, while the manufacturer signs the declaration and carries the responsibility.
  • Copying last year’s legislation list: repealed directives, superseded standard editions, missing acts and the wrong model variant come from reusing an old declaration instead of starting from the product.

When does a declaration of conformity need updating?

 

A declaration changes when the product changes, when an act is replaced or amended, when a cited standard is superseded or restricted, or when the manufacturer’s details change.[7] Dates to plan around:

 

  • January 20, 2027: the Machinery Regulation applies and Directive 2006/42/EC is repealed.
  • December 11, 2027: Delegated Regulation (EU) 2026/339 repeals the RED cybersecurity act to make way for the Cyber Resilience Act, Regulation (EU) 2024/2847. Declarations for products placed after that date need a new legislation line.
  • August 1, 2030: the Toy Safety Regulation (EU) 2025/2509 applies and a digital product passport replaces the toy declaration.[13]
  • Omnibus IV: proposals on digitalisation and common specifications across product law, which are not yet adopted.[14] On June 26, 2026, Coreper, the committee of Member State ambassadors, confirmed the negotiated text. On July 14, 2026, Parliament’s internal market committee approved it, and a plenary vote is indicatively set for November 23, 2026.

Frequently asked questions

Who signs an EU declaration of conformity?

The manufacturer, or an authorised representative established in the EU. Either way, the manufacturer takes responsibility for compliance, and notified bodies are not responsible for providing it.

Is the CE marking the same as the declaration of conformity?

No. The CE marking is the sign on the product, applied once compliance is shown and the declaration drawn up, while the declaration is a separate signed document.

Do I need one declaration per directive?

No. Where several acts requiring a declaration apply, you draw up a single EU declaration of conformity that names each act with its publication reference.

How long must I keep an EU declaration of conformity?

Keeping it for 10 years after the product is placed on the market is common, but each act sets its own period, and the Machinery Regulation says at least 10 years.

Does a product under the General Product Safety Regulation need a declaration of conformity?

No. The GPSR asks for an internal risk analysis and technical documentation kept for 10 years, but no declaration and no CE marking.

Does the declaration have to go in the box?

It depends on the act. Radio equipment must come with a copy or the simplified declaration, and the Machinery Regulation accepts the declaration or its internet address or code in the instructions. Under the Low Voltage and EMC Directives, you keep it available and provide it on request. Products with no declaration, such as cosmetics, have nothing to ship.

Notes and sources

 

  1. Decision No 768/2008/EC, Annex I Articles R2, R4 and R10; Annex II Module A; Annex III
  2. General Product Safety Regulation (EU) 2023/988, Article 9
  3. Toy Safety Directive 2009/48/EC, Articles 2, 4(3), 15 and 19(3), Annex II Part IV and Annex III
  4. Batteries Regulation (EU) 2023/1542, Articles 13(6), 18 and 38
  5. Ecodesign Regulation (EU) 2024/1781, Articles 27, 29 and 44
  6. Cosmetics Regulation (EC) No 1223/2009, Articles 4, 11 and 13
  7. Blue Guide 2022, Commission Notice 2022/C 247/01), sections 2.11, 4.4 and 5.2.2
  8. Low Voltage Directive 2014/35/EU, Articles 1, 6(3) and 15, Annex III and IV
  9. Radio Equipment Directive 2014/53/EU, Articles 3, 10, 17 and 18, Annexes VI and VII
  10. EMC Directive 2014/30/EU, Articles 2(2), 7(3) and 15
  11. Machinery Regulation (EU) 2023/1230, Articles 2(2), 10, 21, 52 and 54, Annex V; corrigendum, OJ L 169, July 4, 2023)
  12. RoHS Directive 2011/65/EU, Articles 7 and 13, Annex VI
  13. Toy Safety Regulation (EU) 2025/2509, recital 54, Articles 56, 57 and 59
  14. European Parliament Legislative Observatory: 2025/0133(COD)) and 2025/0134(COD))

 

Additional sources:

 

 

This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today