Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

Radio Equipment Directive: does your product with Bluetooth or Wi-Fi fall under RED?

Find out if the Radio Equipment Directive applies to your Bluetooth or Wi-Fi product and what RED requires, from cybersecurity to the CE marking steps.
A Products card in Daptic's app listing a connected coffee machine and a Bluetooth toy, each tagged as radio equipment, over indigo gradient columns.
November 10, 2026

Marc HaddadMarc HaddadForward Deployed Regulatory Engineer

 

The Radio Equipment Directive (Directive 2014/53/EU, known as RED) applies to any product that intentionally sends or receives radio waves to communicate or to determine position. A kettle with Wi-Fi, a toy with Bluetooth and a GPS tracker are all radio equipment, and RED applies to the whole finished product, not only to the radio module inside it.

 

Key points

 

  • Whole product in scope: if your product contains a working radio, RED covers the whole product. A pre-certified module doesn’t change that, since you are the manufacturer of new radio equipment.
  • Replaces the LVD and EMC Directive: RED replaces the Low Voltage Directive (LVD) and the Electromagnetic Compatibility (EMC) Directive for radio equipment, applying safety rules with no voltage limit and adding rules on spectrum use.
  • Cybersecurity since August 2025: RED cybersecurity requirements have applied since August 1, 2025, to internet-connected products, and to toys, childcare products and wearables that can process personal data.
  • Self-declared compliance: you show compliance yourself with technical documentation, one EU declaration of conformity and CE marking on each unit before it is placed on the market. A notified body is needed only in specific cases.
  • CRA handover: the Cyber Resilience Act takes over cybersecurity from December 11, 2027, but its vulnerability and incident reporting has applied since September 11, 2026.

What is the Radio Equipment Directive?

 

RED is the EU law that sets the requirements radio equipment must meet before it is placed on the EU market. It covers safety, electromagnetic compatibility, use of the radio spectrum and, for some categories, cybersecurity and charging.

 

National market surveillance authorities (the regulators in each EU country who check products on sale) enforce it, and there is no EU-level approval to wait for. What controls market entry is your own conformity assessment of the finished product. In practice, that means an EU declaration of conformity (DoC), the signed document in which you state the product meets every EU law that applies, plus CE marking on each unit before it is placed on the market.

Does RED apply to my product?

 

RED applies if your product is an electrical or electronic product that intentionally emits or receives radio waves for radio communication or radiodetermination.[1] It also applies when the product needs an accessory, such as an antenna, to do so.

 

Radiodetermination means finding position, velocity or other characteristics by radio,[1] so a receive-only satellite navigation (GNSS) tracker is in scope even though it never transmits.

 

The exclusions are narrow:

 

  • amateur radio equipment that isn’t placed on the market
  • marine equipment
  • airborne products under EU aviation law
  • custom evaluation kits used only in research and development facilities[1]
  • equipment used exclusively for public security, defence or state security[1]

 

Where the radio sits matters: if it’s in a separate dongle sold on its own, the dongle is the radio equipment and the appliance stays under the LVD and EMC Directive.

 

The table applies the scope test to common product configurations.

 

Product feature Does RED apply? What applies instead or alongside Main consequence
Embedded radio (Wi-Fi kettle, power tool with a Bluetooth module) Yes, to the whole product Machinery law for the tool; RoHS, ecodesign The DoC cites RED, not the LVD or EMC Directive
Pre-certified module built into your product Yes, to the whole product. The module is also radio equipment in its own right None You are the manufacturer. The module’s DoC doesn’t cover your product; its test reports can serve as evidence
Toy with Bluetooth to a phone app Yes Toy safety law Article 3(3)(e) applies if it processes personal data, with or without internet
Receive-only GNSS or broadcast receiver Yes None Article 3(2) still applies
NFC reader, or active RFID tag with its own battery Yes None Full RED assessment
Passive, battery-free tag or NFC sticker Not settled by the Directive’s text None, if out The reader that powers it is radio equipment either way. Get the tag’s status confirmed
Radio fitted but switched off in firmware Treat as yes None Assess every configuration (Article 17(1))
Radio hardware absent, or wired only No LVD (50 to 1,000 V AC, 75 to 1,500 V DC), EMC Directive The variant needs its own DoC under those directives

 

NFC is near-field communication, and RFID is radio-frequency identification. RoHS, the EU restriction on hazardous substances in electrical equipment, may apply alongside RED, as may machinery, toy safety, ecodesign and substance rules, but this guide doesn’t cover them. It also doesn’t cover UK or US radio approvals, which are separate processes.

Does a product with a certified Bluetooth or Wi-Fi module fall under RED?

 

Yes. The module maker’s DoC covers the module, but once you build it into your product, the product is new radio equipment and you are its manufacturer.

 

The module’s test reports can support your technical documentation, but the DoC for the finished product is yours.[1] Delegated Regulation (EU) 2022/30 says all aspects and parts of the equipment must comply.[2] For a connected product, that puts the app account and the firmware update path in scope, not just the radio chip.

 

A radio switched off in firmware still counts: if a firmware update or a setting can switch it on, assess it as on, because you must assess every configuration.[1]

What does RED 2014/53/EU require?

 

RED sets its essential requirements in Article 3: three of them always apply, and the others apply only to categories the EU has named.

 

The requirements that always apply:

 

  • Health and safety: Article 3(1)(a), which includes the LVD’s safety objectives “with no voltage limit applying”.
  • Electromagnetic compatibility: Article 3(1)(b).
  • Radio spectrum: Article 3(2), effective and efficient use of the radio spectrum.

 

Requirements that apply only to named categories:

 

  • Article 3(3): this point, which includes cybersecurity, applies only to categories named in a delegated act (a regulation the European Commission adopts to fill in detail under the directive).
  • Article 3(4): the common charger requirement applies to products on the common charger list, such as phones, headsets, portable speakers and laptops.

 

Radio equipment is not subject to the LVD,[1] and the EMC Directive excludes it,[3] so neither belongs on your DoC. The safety and EMC tests often stay the same, but the legal basis changes.

 

This catches low-voltage products: a 12 V battery tool falls below the LVD’s voltage range, but add Bluetooth and RED safety applies with no lower voltage limit.

What are the RED cybersecurity requirements?

 

The RED cybersecurity requirements come from Delegated Regulation (EU) 2022/30, which has applied since August 1, 2025, after Delegated Regulation (EU) 2023/2444 moved its start to that date. 2022/30 works in three tiers, each tied to a point of Article 3(3):

 

  • Point (d), protecting the network: this applies to equipment that can communicate over the internet, directly or through other equipment.[2]
  • Point (e), personal data and privacy: this applies to internet-connected equipment that can process personal, traffic or location data. It also applies to childcare equipment, toys and wearables that can process such data, connected or not.[2]
  • Point (f), fraud: this applies to internet-connected equipment that lets the user transfer money, monetary value or virtual currency.[2]

 

Point (e) reaches products that never go online: a Bluetooth toy that can process personal data, such as a child’s name from its app, is covered even though it never touches the internet itself. Medical devices and vehicle equipment are partly or fully carved out of the cybersecurity requirements.[2]

 

The harmonised standards are EN 18031-1, -2 and -3:2024, and Implementing Decision (EU) 2025/138 of January 28, 2025, cited them with restrictions. A harmonised standard is a European standard cited in the EU’s Official Journal. Applying one in full gives a presumption of conformity, meaning the product is treated as meeting the requirement it covers.

 

One restriction decides many projects: EN 18031 gives no presumption of conformity if setup lets the user skip setting any password. That one onboarding screen decides whether you need a notified body.

 

Obligations attach to each unit, not to the design, so stock placed on the market from August 1, 2025, had to meet the cybersecurity requirements, whenever it was built.

What happens to RED cybersecurity under the Cyber Resilience Act?

 

From December 11, 2027, the Cyber Resilience Act (Regulation (EU) 2024/2847, CRA) takes over cybersecurity for radio equipment. Safety, EMC and spectrum stay under RED, with Article 3(1) and 3(2) unchanged.

 

On February 16, 2026, the Commission adopted Delegated Regulation (EU) 2026/339, which was published on April 29, 2026, and repeals 2022/30 with effect from December 11, 2027. Units placed on the market from August 1, 2025, to December 10, 2027, stay subject to RED cybersecurity enforcement.[4]

 

Since September 11, 2026, ahead of that handover, the CRA has required reporting of actively exploited vulnerabilities and severe incidents, including for products already on the market.[5] If you have product lines on sale across that handover, Daptic works out which RED and CRA cybersecurity obligations reach each of your products and flags changes like this repeal to the team that owns each one.

How do you comply with the Radio Equipment Directive?

 

You comply by assessing the finished product against Article 3, documenting it, and declaring and marking it before sale, in these steps:

 

  1. List every radio: go through the bill of materials and record each radio’s module part number, bands, maximum power, antenna and whether it transmits, only receives, or is passive. Include radios in remotes, docks and accessories.
  2. Scope each variant: decide which SKUs (stock-keeping units) carry a radio and whether it can be enabled in the field.
  3. Map Article 3: points 3(1)(a), 3(1)(b) and 3(2) always apply. Then check each 2022/30 category, and Article 3(4) if the product is on the common charger list.
  4. Pick the conformity route under Article 17: for Article 3(1), internal production control, meaning self-assessment, is always available.[1] For Articles 3(2) and 3(3), self-assessment works only if harmonised standards are applied in full. Otherwise you need EU-type examination or full quality assurance,[1] both with a notified body, an independent assessor designated by an EU country.[1]
  5. Write the technical file: build the technical documentation, including the software and firmware versions that affect compliance.[1]
  6. Issue one DoC: a single declaration names every EU law that applies.[1] Ship each unit with a copy, or with a simplified DoC giving the exact internet address of the full text.[1]
  7. Mark and inform: before placing on the market, affix CE marking to the product or its data plate, and to the packaging.[1] The marking may be under 5 mm high if it stays legible,[1] and the notified body’s number follows it only under Annex IV.[1] The instructions and safety information must state the frequency bands and the maximum radio-frequency power transmitted.[1] The product must be operable in at least one Member State without breaching spectrum rules.[1] If a Member State restricts putting into service or requires authorisation, show it on the packaging with the pictogram or the words “Restrictions or Requirements in” plus the country codes, and detail it in the instructions.[1, 6]
  8. Prepare for the CRA: set up CRA reporting now, and plan conformity under the CRA for units placed from December 11, 2027.

What else is changing for radio equipment?

 

Beyond the CRA, these dates matter:

 

  • Since December 28, 2024: the common charger requirement, covered in its own guide, has applied to the listed categories, and to laptops since April 28, 2026.
  • December 28, 2026: this is the Commission’s deadline to report on selling radio equipment without chargers, and the report could lead to a proposal for mandatory unbundling.[1]
  • 2026: the Commission published an updated Guide to the RED, which is guidance, not law.

Frequently asked questions

Does RED apply to my product if it has Bluetooth or Wi-Fi?

Yes. Any product that intentionally sends or receives radio waves to communicate or determine position is radio equipment, and RED applies to the whole product.[1]

Do I need a notified body for RED?

Not if you apply harmonised standards in full for Article 3(2) and 3(3), including EN 18031 with its restrictions.[1] If setup lets users skip setting any password, though, EN 18031 gives no presumption of conformity and you need a notified body.

Can I rely on the module maker’s declaration of conformity?

No. The module’s test reports can support your technical documentation, but the DoC for the finished product is yours.[1]

Does a GPS tracker that only receives fall under RED?

Yes, because receiving radio signals to determine position is enough.[1]

Do I still need EMC testing for radio equipment?

Yes, under RED Article 3(1)(b), but you don’t apply the EMC Directive itself, and it doesn’t belong on your DoC.

Will the Cyber Resilience Act replace RED?

Not entirely. From December 11, 2027, the CRA takes over cybersecurity only,[4] while safety, EMC and spectrum stay under RED.

Notes and sources

 

  1. Directive 2014/53/EU (RED), OJ L 153, May 22, 2014, particularly Articles 1, 2, 10, 17, 18, 19(2), 20 and 47(3); Annex I; Annex II; Annex III (EU-type examination) and Annex IV (full quality assurance); Annex V.
  2. Delegated Regulation (EU) 2022/30, OJ L 7, January 12, 2022, particularly Articles 1 and 2; recital 8.
  3. Directive 2014/30/EU (EMC) and Directive 2014/35/EU (LVD), particularly Article 2(2)(a).
  4. Delegated Regulation (EU) 2026/339, particularly recital 5.
  5. Regulation (EU) 2024/2847 (Cyber Resilience Act), particularly Articles 69(3) and 71(2).
  6. Implementing Regulation (EU) 2017/1354, particularly Article 2.

 

Additional sources:

 

 

This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today