Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

Is UL certification required? NRTLs, OSHA and what US retailers ask for

Is UL certification required? Not by federal law in general. See where OSHA, NRTL, inspector and retailer requirements come from and how to meet them.
A product listings card over blue gradient columns, showing household and commercial food warmer models tagged with UL 1026 and UL 197.
November 10, 2026

Marc HaddadMarc HaddadForward Deployed Regulatory Engineer

 

No federal law makes UL certification a general condition of selling a product in the US. UL is a private certification company and one of 21 Nationally Recognized Testing Laboratories (NRTLs) on the Occupational Safety and Health Administration’s (OSHA’s) list. A “you need UL” requirement usually comes from workplace rules, electrical codes, a category-specific law or a buyer’s contract.

Key points

 

  • OSHA: employers, not manufacturers, must use “approved” electrical equipment, and a mark from any NRTL recognized for the right standard meets that.
  • Electrical inspectors: they enforce the electrical code their state or city adopted, and some states add their own rules. Washington requires a listing or a field evaluation and runs its own lab accreditation.
  • Category laws: a few laws name a UL standard for one product category, such as New York City’s e-bike law, but any accredited lab can certify to that standard.
  • Buyer contracts: retailers, marketplaces and insurers often require a listing in their vendor terms, which makes it a contract obligation, and the clause decides which marks are acceptable.
  • Recognized components: a product built from UL Recognized components is not a listed product, so the end product needs its own evaluation.

Where does a “UL required” rule come from?

 

When a buyer tells you a product “needs UL,” the requirement almost always comes from one of four places. Each is satisfied in a different way, and none of them makes UL the only acceptable lab.

 

  • OSHA’s workplace rule: employers must use approved electrical equipment.
  • Electrical codes: state and local inspectors enforce them.
  • Category laws: these name a standard for one type of product.
  • The buyer’s contract: the buyer’s own vendor terms.

 

Federal consumer product rules sit alongside these, and they work differently again. The table shows who asks for a listing, whether the requirement is law or contract, and what satisfies it.

 

Who asks What they ask for Law or contract What satisfies it
Employer using it at work “Approved” electrical equipment (1910.303(a)) Law, on the employer A mark from any NRTL whose scope covers the right standard, or the narrow alternatives in 1910.399
Electrical inspector Approval under the adopted NEC; in Washington, listed or field evaluated Law, state or local A listing the jurisdiction accepts, or a field evaluation
State or city, for a named category Certification to a named standard (NYC: UL 2849, 2272, 2271) Law, on the seller Any accredited lab certifying to that standard, with its mark shown
CPSC Compliance with applicable rules; third-party testing for children’s products Law Test results and your own certificate; no listing mark
Retailer, marketplace, insurer Whatever the vendor terms say Contract The mark or standard the contract names, or one the buyer accepts in writing

Does OSHA require UL certification?

 

No. OSHA requires employers to use approved electrical equipment, and a mark from any NRTL recognized for the right standard counts. OSHA’s electrical standard says conductors and equipment are acceptable “only if approved.”[1]

 

Equipment counts as approved if an NRTL has accepted, certified, listed or labeled it, or otherwise found it safe.[1] There are two narrow alternatives. Where no NRTL handles that kind of equipment, inspection by another federal agency or a state or local authority can count. Custom-made equipment can also count if its manufacturer finds it safe on test data that the employer keeps on file.[1]

 

The duty sits with the employer: OSHA’s FAQ says its authority “is limited to employers” and that it does not require manufacturers to certify their products. Manufacturers still feel the rule, because their workplace customers can’t lawfully use unapproved electrical equipment.

 

Electrical equipment is one of several dozen product types OSHA requires to be NRTL-approved, alongside others such as portable fire extinguishers, sprinkler systems and some liquefied petroleum gas (LPG) equipment.

What is an NRTL, and does it have to be UL?

 

An NRTL is a lab OSHA has recognized to certify products to a specific list of test standards. It does not have to be UL: any NRTL counts, but only within its scope.

 

Scope is that list of standards. OSHA recognizes each lab for specific test standards, and its NRTL FAQ says an NRTL may certify only to the standards in its list. Before you pick a lab, check its scope on OSHA’s NRTL pages.

 

As of November 10, 2026, OSHA’s list has 21 NRTLs, including UL LLC, Intertek Testing Services NA (the ETL mark), CSA Group Testing and Certification, TÜV Rheinland of North America, TÜV SÜD America, SGS North America and NSF International.

Do electrical inspectors require a UL listing?

 

Inspectors require equipment to be approved under the electrical code their state or city has adopted, and in practice they look for a listing mark. A mark from another NRTL usually works if the lab’s scope covers the standard.

 

States and cities adopt the National Electrical Code (NEC), which the National Fire Protection Association publishes as NFPA 70. The NEC is a standard that becomes law only through adoption, often with local amendments and on different editions. It requires equipment to be approved,[2] meaning acceptable to the authority having jurisdiction, which is whoever enforces the code locally, usually the local electrical inspector.

 

Some states go further. Washington requires electrical equipment to conform to recognized standards, be listed or be field evaluated before it is energized.[3] Every lab that certifies or field-evaluates electrical products offered for sale in the state must also be accredited by Washington’s Department of Labor and Industries, and an NRTL qualifies on application.[4] Washington also bars offering spa, hot tub and pool electrical equipment for sale without an approved lab’s certification mark.[5]

 

These layers sit in state statutes, city codes and code editions that change on their own schedules. Daptic tracks those statutes, codes and edition changes and shows which listing and lab rules apply to your product in each state and city you sell into. Whatever you use, check every market before you ship.

Which laws require a specific UL standard?

 

A few state and city laws name a safety standard for one product category. They name the standard, not the lab, so any accredited lab can certify to it.

 

New York City’s Local Law 39 of 2023 was enacted on March 20, 2023, and took effect on September 16, 2023. It bars selling, leasing or renting e-bikes, other powered mobility devices and their batteries unless an accredited testing laboratory has certified them to UL 2849, UL 2272 or UL 2271 respectively.[6]

 

The lab’s certification, logo, wordmark or name must appear on the product, its packaging or the documentation provided at sale. Since Local Law 50 of 2024, it must also appear on every online product listing page. In this law, “UL 2849” is the name of a standard, and any accredited lab can certify to it.

Does the CPSC require a UL listing?

 

No. The Consumer Product Safety Commission (CPSC) does not require a lab listing for household electrical products in general, though some of its rules borrow features from UL standards.

 

Extension cords without the UL 817 characteristics, seasonal lighting without the UL 588 characteristics and hair dryers without immersion protection are deemed substantial product hazards.[7] In plain terms, the rule treats a product missing those features as hazardous, but it does not require the mark itself. CPSC also says the extension cord rule does not trigger any testing or certification requirement under section 14(a).

 

Where a CPSC rule does apply, you certify compliance yourself. For children’s products, including mains-powered toys,[7] a CPSC-accredited third-party lab must do the testing,[8] and those labs are on a different list from OSHA’s NRTLs. A certificate is your own legal declaration, not a lab listing.

What certification do US retailers require?

 

Whatever their vendor terms say. Many retailers, marketplaces and insurers make a listing a condition of doing business, whether or not the law requires one.

 

That obligation is contractual, and it lives in the buyer’s vendor manual or purchase order, so read the clause itself. Some clauses name a lab’s mark, some say “NRTL,” and some name a standard. If the clause names a different lab’s mark from the one you hold, get the buyer’s acceptance in writing.

How does the answer change for different products?

 

The product type and the channel decide which rows of the table apply, and these are the main differences:

 

  • Electrical and electronic products: these can face all five rows.
  • Children’s products and toys: these add CPSC third-party testing, which a listing does not replace.
  • Industrial machinery: once installed at a workplace, it is electrical utilization equipment,[1] so the buying employer needs it approved. An unlisted machine is a common field-evaluation case.
  • Permanently wired products: an electrical inspector sees them at installation.
  • Products in a named category: where a state or city names the category, as New York City does for e-bikes and e-scooters, the product must meet that law’s standard.
  • Non-electrical products: those off OSHA’s list and outside any CPSC rule face only the contract row.

 

This article covers safety listings only. For the wider picture, including other federal and state requirements, see US product compliance and what product compliance covers.

What do listed, labeled, certified and recognized mean?

 

They describe different things an NRTL has done, and only some of them cover a finished product. OSHA’s definitions are generic:[1]

 

  • Listed: the product appears in a list published by an NRTL that periodically inspects production.
  • Labeled: the product carries the NRTL’s mark under that same factory follow-up.
  • Certified: the product carries a record that an NRTL tested it.

 

UL’s own terms sit inside that framework. The UL Recognized Component mark covers a part built into a larger product under “conditions of acceptability,” meaning limits on how the part may be used. UL says the mark is not a certification for a complete, standalone product, and other NRTLs run parallel programs under their own names.

Is a product listed if every component is UL Recognized?

 

No. A recognized power supply, switch and wire inside your enclosure do not make the product listed.

 

This is the costly mistake: “every part inside is UL recognized, so we’re covered.” The end product still needs its own evaluation, which can reuse the component data, but only where each part was used within its conditions of acceptability.

What if a product has no listing?

 

A product with no listing, such as a one-off imported machine, can often be field evaluated, meaning an evaluator inspects the installed unit and applies a field label.

 

Washington names field evaluation as an alternative to listing.[3] Elsewhere, confirm that the inspector and the employer accept a field label before you ship on one.

How do you meet NRTL certification requirements?

 

Work from the product and its buyers to the standard, then to the lab.

 

  1. Classify the product and its channels: note whether it is a children’s product, used at work, permanently wired, or in a category a state or city names.
  2. Read each buyer’s vendor terms: record whether the clause names UL, any NRTL, or a standard.
  3. Pick the standard, then the lab: find the safety standard for your category and use, then confirm on OSHA’s NRTL pages that the lab’s scope includes it.
  4. Check the state and local layers: cover every market you sell into.
  5. Get written acceptance: get it from any buyer whose terms name a different lab’s mark.
  6. Keep factory follow-up running: a listing depends on the NRTL’s periodic production inspections, so if they stop, the listing stops.[1]

Example: a countertop food warmer sold to homes and restaurants

 

Take a 120 V countertop food warmer made in two versions, a composite case rather than a real product.

 

The household model goes to a national retailer whose vendor terms require an NRTL listing, and that clause decides whether the product ships.

 

The commercial model goes into restaurant kitchens, which are workplaces, so the restaurant as employer must use approved equipment,[1] and the local inspector may check it. Each listing attaches to a standard: UL 1026 for household cooking and food-serving appliances, and UL 197 for commercial cooking appliances. Intertek’s OSHA scope, for example, includes both standards.

 

Put a household-listed unit in a commercial kitchen and you invite the question of whether its listing covers that use, because listed equipment must be used under the listing’s instructions.[1] In practice, that means two listings, which can come from one NRTL.

 

To apply this to your own product, list each channel it sells through, name the standard that fits each use, and check that one lab’s scope covers them all.

What is changing?

 

Two changes affect the rules above.

 

  • On December 31, 2026, the 2026 NEC takes effect in Washington, which has adopted it to replace the 2023 edition.[9]
  • In 2025, New York City’s Department of Consumer and Worker Protection (DCWP) took comments on adding EN 15194 as an accepted e-bike standard, and we found no decision as of November 10, 2026.

Frequently asked questions

Is UL listing required by law?

No federal law makes UL certification a general condition of selling a product in the US. The laws that do require approval or certification, such as OSHA’s workplace rule and New York City’s e-bike law, do not make UL the only acceptable lab.

Does OSHA require UL certification?

No. OSHA requires employers to use approved equipment, and a mark from any NRTL recognized for the right standard meets that.[1]

What certification do US retailers require?

Whatever their vendor terms say: some name a lab’s mark, some say “NRTL,” and some name a standard. If the clause names a different lab’s mark from yours, get the buyer’s acceptance in writing.

Will an ETL or CSA mark satisfy an electrical inspector?

Usually, yes, if the lab’s OSHA scope covers the standard. A state can add its own lab accreditation, as Washington does.[4]

Do I need a CPSC certificate instead of a UL listing?

Only if a CPSC rule applies to the product, and then you certify compliance yourself. Children’s products need testing by a CPSC-accredited third-party lab,[8] which a listing does not replace.

Does a UL listing satisfy New York City’s e-bike law?

Yes, if it is a certification to UL 2849 by an accredited lab and the mark is displayed. A certification to the same standard by another accredited lab satisfies it too.

Notes and sources

 

  1. 29 CFR 1910.302, 1910.303 and 1910.399, particularly § 1910.399; § 1910.302(a); § 1910.303(b)(2).
  2. NFPA 70, National Electrical Code (NEC).
  3. Washington Administrative Code (WAC) 296-46B-010(7).
  4. Washington Administrative Code (WAC) 296-46B-999(6).
  5. Revised Code of Washington (RCW) 19.28.010(5).
  6. New York City Administrative Code §§ 20-609 and 20-610.
  7. 16 CFR part 1120 and part 1505, particularly § 1120.3.
  8. 15 U.S.C. 2063, particularly § 2063(a)(2).
  9. Washington Administrative Code (WAC) 296-46B-010(1).

 

Additional sources:

 

 

This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today