Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

US product compliance: what manufacturers need to know

US product compliance explained for manufacturers: which federal agencies, state laws and import rules apply to your product, and where to start.
Eight checked chips arranged in a circle on an indigo gradient, each naming a US agency and what it covers, such as CPSC consumer products and FCC radio devices.
November 12, 2026

Marc HaddadMarc HaddadForward Deployed Regulatory Engineer

 

US product compliance means meeting every federal agency rule, state law and retailer requirement that applies to your product when you sell it in the United States. There is no single US product law and no general mark like the EU’s CE mark, so what applies depends on the product, how it is sold and which states it reaches.

Key points

 

  • Three separate layers: federal agencies, state laws, and the retailers and insurers you sell through each set requirements, and meeting one layer does not satisfy another.
  • Three or four agencies: most manufacturers deal with three or four of the nine federal agencies, so start from your product list rather than from a statute.
  • Importers certify: for imported consumer products, the importer certifies compliance, and since July 8, 2026, it has also filed the certificate data with customs at entry.
  • UL marks: no federal law requires a UL mark on consumer goods in general, but workplace rules and customers often do.

What is US product compliance?

 

US product compliance is the set of federal, state and commercial requirements a product has to meet to be sold in the United States. Unlike the EU, which puts most product rules under one framework with one marking, the US built its rules agency by agency as each hazard came up. Each agency has its own definitions, its own route to compliance and its own answer to “who is responsible.”

 

States add their own laws on top, mostly on chemicals, warnings and packaging. Large retailers add contract requirements, such as a safety listing from a testing laboratory, which are not law but decide whether you get shelf space.

 

EU paperwork does not carry over, because US rules call up different standards and different certifying parties. Some CE test data can be reused, but the certificate has to cite US rules. For the picture beyond the US, see what product compliance covers.

Which US agencies regulate products?

 

Nine federal agencies set the main US product rules, and most manufacturers deal with three or four of them, depending on what the product does and who uses it.

 

The table shows what each agency covers and its main legal basis in the United States Code (U.S.C., where federal laws are collected) or the Code of Federal Regulations (CFR, where agency rules are collected).

 

Agency What it covers Main legal basis
CPSC (Consumer Product Safety Commission) Consumer products, with stricter rules for children’s products Consumer Product Safety Act (CPSA), 15 U.S.C. 2051 and following; Consumer Product Safety Improvement Act of 2008 (CPSIA)
FCC (Federal Communications Commission) Devices that emit radio frequency energy, on purpose (radios) or as a by-product (digital circuits) 47 CFR parts 2 and 15
OSHA (Occupational Safety and Health Administration) Equipment employers use at work, including the Nationally Recognized Testing Laboratory (NRTL) program 29 CFR part 1910
CBP (US Customs and Border Protection) Entry of imports, country of origin marking, holding goods for other agencies 19 U.S.C. 1304; 19 CFR part 134
EPA (Environmental Protection Agency) Chemicals under the Toxic Substances Control Act (TSCA), pesticides and treated articles, engine and vehicle emissions 15 U.S.C. 2601 and following; 40 CFR
FDA (Food and Drug Administration) Food, drugs, cosmetics, medical devices and radiation-emitting electronic products (outside this guide) 21 CFR
NHTSA (National Highway Traffic Safety Administration, part of the Department of Transportation) Motor vehicles and motor vehicle equipment 49 U.S.C. 30112; Federal Motor Vehicle Safety Standards (FMVSS), 49 CFR part 571
FTC (Federal Trade Commission) Labeling and advertising claims: “Made in USA,” textile fiber content, care labels, EnergyGuide labels 16 CFR parts 323, 303, 423 and 305
DOE (Department of Energy) Energy and water efficiency standards, testing and certification for covered appliances and equipment 42 U.S.C. 6291 and following; 10 CFR parts 429 to 431

 

A connected kitchen appliance, for example, touches CPSC, FCC and DOE. An engine-powered tool touches CPSC and EPA, with EPA certifying the engine family rather than the tool.

What are the CPSC requirements for consumer products?

 

Every consumer product subject to a CPSC rule, ban, standard or regulation needs a certificate stating that it complies with each rule.[1] The certificate comes in two kinds:[2]

 

  • General Certificate of Conformity (GCC): for general-use products, based on a test of each product or a reasonable testing program.
  • Children’s Product Certificate (CPC): for products “designed or intended primarily for children 12 years of age or younger.”[1] Testing must be done by a third-party lab accredited for that rule and accepted by CPSC.[1, 3]

 

Children’s products also need permanent tracking labels on the product and its packaging, to the extent practicable, giving the maker, production date and place, and batch.[1]

 

Many mandatory rules start as voluntary industry standards, such as those published by ASTM, but a standard is not law until CPSC adopts it. Once it does, you test to the edition named in the regulation, which for toys is ASTM F963-23.[2]

 

For imported products, the importer issues the certificate, not the overseas factory. For products made in the US, the manufacturer or the private labeler (the brand that sells the product under its own label) issues it.[2]

 

Since July 8, 2026, importers have had to eFile (file electronically) certificate data at entry in CBP’s filing system, the Automated Commercial Environment (ACE). They can send the full data set or a reference to a record in CPSC’s Product Registry.[2]

 

From January 8, 2027, goods entered from a foreign trade zone will follow. Keep certificates and supporting records for five years.[2]

What FCC rules apply to electronic products?

 

Radio frequency devices need FCC equipment authorization before they are marketed, through one of two routes:

 

  • Certification: by a Telecommunication Certification Body, resulting in an FCC ID on the product. Intentional radiators, which transmit on purpose (Bluetooth and Wi-Fi devices, for example), must be certified.[4]
  • Supplier’s Declaration of Conformity (SDoC): the responsible party tests the device and declares compliance itself. Most unintentional radiators, which emit radio energy as a by-product (products with digital circuitry, for example), can use either SDoC or certification.[4]

 

The responsible party differs by route: for certification, it is whoever holds the grant.[4] For SDoC, it is the manufacturer, the assembler or the importer, and it must be located in the US.[4]

 

Two more rules limit what you can authorize and where you can test. Equipment on the FCC’s Covered List cannot be authorized,[4] and SDoC testing cannot be done at a lab owned or controlled by a “prohibited entity,”[4] so check your lab before you book it.

Do you need UL certification to sell in the US?

 

No. Federal law does not require a UL mark, or any testing laboratory’s mark, on consumer goods in general. The demand comes from employers, local inspectors, retailers and insurers.

 

UL is one of several NRTLs, which are private labs that OSHA recognizes to certify products against safety standards. Electrical equipment used in the workplace is acceptable only if “approved,”[5] which in practice means listed, labeled or certified by an NRTL.[5]

 

That legal duty sits with employers and reaches you through customers who buy for their workplaces. Local electrical inspectors and building authorities often expect installed equipment to be listed, and retailers and insurers add the same demand by contract. A tool sold at retail to consumers needs a GCC if a CPSC rule applies. The same tool sold to contractors gets pulled toward NRTL listing by their employers’ OSHA duties, and neither satisfies the other.

What do you need to import products into the US?

 

You need an importer of record, country of origin marking on the goods, and your certificates and test records ready before the goods ship.

 

The importer of record is the party that makes entry and answers to CBP for the goods.[6] For CPSC-regulated products, that party is also the certifier, so a foreign manufacturer without a US entity has to decide who will import and take on the certificate.

 

Every imported article must be marked with its country of origin in English, “in a conspicuous place as legibly, indelibly, and permanently as the nature of the article” permits, so the ultimate purchaser can see it.[7] CPSC can refuse admission to a product that fails a rule, arrives without a required certificate, or lacks a required tracking label.[1] Have certificate data, test reports, FCC grants or SDoC records, and marking details ready before shipping.

 

The $800 de minimis exemption no longer gives low-value parcels a shortcut, because it has been suspended since August 29, 2025, under Executive Order 14324. Since June 24, 2026, an interim final rule in CBP’s own regulations has made the suspension indefinite for non-postal shipments.[8] The statute ends the exemption on July 1, 2027.[9]

Which state laws apply to products?

 

State laws apply on top of federal rules, differ from state to state and mostly cover chemicals, warnings and packaging.

 

  • California Proposition 65: businesses must warn before knowingly exposing people in California to a listed chemical. Businesses with fewer than 10 employees are exempt, and warnings are required 12 months after a chemical is listed. Responsibility sits mainly with manufacturers, importers and distributors, and with retailers in defined cases. Products manufactured from January 1, 2028, must use the revised short-form warning, which names at least one listed chemical, to keep safe harbor protection. Safe harbor means the warning is treated as meeting the law.
  • PFAS in products: since January 1, 2025, Minnesota has banned intentionally added per- and polyfluoroalkyl substances (PFAS) in 11 product categories, including cookware, juvenile products and upholstered furniture. From January 1, 2032, it will ban them in all products unless the use is ruled “currently unavoidable.”[10] Maine’s equivalent list took effect on January 1, 2026, with its own catch-all from January 1, 2032.[11]
  • Packaging: several states have extended producer responsibility (EPR) laws, which make producers responsible for their packaging. In Oregon, producers had to join a producer responsibility organization by July 1, 2025.

 

Read the exclusions closely, because they are not always what you would expect. Minnesota’s definition of “juvenile product” excludes children’s electronic products, and its 2025 ban does not apply to PFAS used only in electronic or internal components.[10] The state layer changes with every legislative session, and it is where teams most often lose track of which rule touches which product. Daptic follows these state bills and rules as they pass and shows which chemical, warning and packaging laws reach each of your products.

What do you have to do after a product goes on sale?

 

You have to report certain safety information to CPSC “immediately,” which CPSC reads as within 24 hours. The duty covers all consumer products, whether or not a CPSC rule applies to them.

 

Under section 15(b) of the CPSA, manufacturers, importers, distributors and retailers must “immediately inform” CPSC when they obtain information that reasonably supports the conclusion that a product fails a rule, has a defect that could create a substantial product hazard, or creates an unreasonable risk of serious injury or death.[1]

 

CPSC reads “immediately” as within 24 hours,[2] and an investigation before reporting should take no more than 10 days.[2] An employee’s knowledge counts as the company’s, and the information should reach the responsible official within 5 days at most.[2] Batch-level traceability and complaint records decide how wide a recall has to be.

Which US requirements apply to my product?

 

Start from what the product is and does, and expect one product to match several lines. The table maps common product features to the US requirements they most likely trigger.

 

If your product… Most likely US requirement Read next
Is for children 12 or under CPC, third-party testing, tracking labels, state chemical laws GCC vs CPC guide
Contains button or coin batteries Performance and warning requirements in 16 CFR part 1263 GCC vs CPC guide
Has a radio (Wi-Fi, Bluetooth, cellular) FCC certification and FCC ID FCC guide
Is used at work NRTL listing through employers’ OSHA duties; customer specifications UL guide
Contains chemicals or coatings TSCA; Proposition 65; state PFAS laws State guide
Is a textile or apparel FTC fiber and care labels (16 CFR parts 303 and 423); flammability (16 CFR part 1610) GCC vs CPC guide
Is furniture Clothing storage unit stability (16 CFR part 1261); upholstered furniture flammability (16 CFR part 1640); state PFAS bans GCC vs CPC guide
Is an appliance DOE standards and certification (10 CFR parts 429 and 430); EnergyGuide label; NRTL listing for retail UL guide
Has an engine, or is vehicle equipment EPA certification by engine family; NHTSA self-certification to FMVSS Separate EPA and NHTSA guides
Ships in packaging State packaging EPR laws State guide

How do you get started with US product compliance?

 

Work product by product, in this order:

 

  1. List each product with its channels: consumer retail, online, workplace, children.
  2. Name the responsible parties: the importer of record, plus the US responsible party for each regime. CPSC, FCC certification and FCC SDoC each name their own, so one product can have three answers to “who signs.”
  3. Map the federal rules: for each product, including the exact standard edition each one cites.
  4. Book the right labs: CPSC-accepted for children’s products, and FCC-eligible for radio testing.
  5. Issue certificates and marking: certificates, eFiling data, origin marking, tracking labels and FCC labels.
  6. Add the state layer: cover every state you ship to, and set up a 24-hour escalation path for safety reports.

Example: applying this to a connected children’s toy

 

Here is how the steps work for one product, and you can run your own through the same order. A manufacturer outside the US makes an interactive plush toy for ages 5 and up, with a Bluetooth module and a coin-cell remote. It sells the toy through a US retailer and through its own website.

 

  1. Classify: it is a children’s product, so it needs a CPC, ASTM F963-23 under 16 CFR part 1250, lead and phthalate limits, and testing at a CPSC-accepted lab.
  2. Battery: the remote is exempt from the button and coin battery rule only if it meets part 1250’s battery accessibility and labeling requirements.[2]
  3. Radio: the Bluetooth module needs FCC certification, an FCC ID and a lab that is not a prohibited entity.
  4. Marking: the toy and its packaging need tracking labels, plus country of origin marking.
  5. Import: the retailer is importer of record for store stock, so it certifies and eFiles, while the maker’s US subsidiary imports and certifies web orders. That gives the same toy two certifiers, and both need the same test data.
  6. States: Proposition 65 applies if a listed plasticizer is in the fabric coating. Neither Minnesota carve-out clearly covers an electronic toy with a PFAS-treated fabric outer layer, so whether the Minnesota and Maine PFAS bans reach the toy is a judgment call.
  7. After sale: the first report of a remote overheating starts the section 15(b) assessment clock.

Frequently asked questions

Do I need UL certification to sell products in the US?

No. Federal law does not require a UL mark on consumer goods in general, but employers’ OSHA duties, local inspectors, retailers and insurers often lead customers to require NRTL listing.

Do CE test reports cover US product requirements?

No. US rules call up different standards and different certifying parties, so some CE test data can be reused, but the certificate has to cite US rules.

Who certifies an imported consumer product in the US?

The importer does, not the overseas factory,[2] and since July 8, 2026, it has also had to eFile the certificate data with CBP at entry.

Is the $800 de minimis exemption still available for US imports?

No. It has been suspended since August 29, 2025, and CBP made the suspension indefinite for non-postal shipments from June 24, 2026. The statute ends it on July 1, 2027.

How quickly do you have to report a product safety problem to CPSC?

Within 24 hours. CPSC reads the law’s “immediately” as 24 hours from obtaining information that reasonably supports the conclusion that a product fails a rule, has a defect that could create a substantial product hazard, or creates an unreasonable risk of serious injury or death.

Notes and sources

 

  1. 15 U.S.C. 2052, 2063, 2064 and 2066 (CPSA), particularly § 2063(a)(1); § 2052(a)(2); § 2063(a)(2); § 2063(a)(5); § 2066(a); § 2064(b).
  2. 16 CFR part 1110, part 1115, part 1250, part 1263, particularly § 1110.3; § 1250.2(a); § 1110.7; § 1110.13(a)(1); § 1110.17; § 1115.14(e); § 1115.14(d); § 1115.14(b); § 1263.1(c); § 1110.7(a).
  3. CPSC rules, 16 CFR parts 1107 and 1112.
  4. 47 CFR part 2, subpart J (2.903, 2.906, 2.909, 2.911) and 47 CFR part 15 (15.101, 15.201), particularly § 15.201(b); § 15.101(a); § 2.909(a); § 2.909(b); § 2.903; § 2.906(a).
  5. 29 CFR 1910.303, 1910.399, OSHA NRTL Program, particularly § 1910.303(a); § 1910.399.
  6. US customs law, 19 U.S.C. 1484.
  7. 19 U.S.C. 1304; 16 CFR 323.2, particularly § 1304(a).
  8. CBP interim final rule, 19 CFR 10.151(b).
  9. Public Law 119-21, section 70531(b).
  10. Minn. Stat. 116.943; 38 M.R.S. 1614, particularly subd. 5; subd. 1 and 5(b).
  11. Maine PFAS law, 38 M.R.S. 1614(5).

 

Additional sources:

 

 

This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today