Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

BIS certification: which products need it to be sold in India

BIS certification explained for manufacturers: how to check if your product falls under a QCO, ISI mark vs CRS, foreign maker duties and the steps.
A Certification Schemes card over two scheme cards, one for the ISI mark and one for CRS registration, on a green banded background.
November 16, 2026

Marc HaddadMarc HaddadForward Deployed Regulatory Engineer

 

BIS certification is the Bureau of Indian Standards’ approval that lets a product be made, imported or sold in India. It is mandatory only for products named in a government order, which requires either the ISI mark under a factory licence or registration under the Compulsory Registration Scheme (CRS).

 

Key points

 

  • India has no single fixed list. A product needs BIS only if a Quality Control Order (QCO) or a compulsory registration order covers it, and each order has its own standard, start date and amendments.
  • The ISI mark scheme licenses one product, to one Indian Standard, made at one factory. CRS registers electronics, IT goods and a few other products against an Indian Standard after testing at a BIS-recognized lab.
  • Foreign manufacturers apply in their own name and nominate a resident Authorized Indian Representative. The importer still can’t clear or sell covered goods without a valid licence or registration.
  • Test reports for CE, UL or other foreign approvals don’t replace testing at a BIS or BIS-recognized lab.
  • Orders are added, postponed, amended and withdrawn often, so check the current order for each product before every launch.

What is BIS certification?

 

BIS certification is permission to apply the Bureau’s Standard Mark to a product, showing it conforms to an Indian Standard. For most products it is voluntary, but the central government can make it compulsory for a product by order.

 

That order is usually called a Quality Control Order. It names the goods, the Indian Standard (written “IS” plus a number) they must meet, and the certification scheme that applies, and it is issued by the ministry responsible for the product, after consulting BIS, under the Bureau of Indian Standards Act, 2016.[1] The schemes themselves are set out in the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018.[2]

 

Two schemes cover most physical products, and the certification marks required in each country differ widely. Scheme-I is the Product Certification Scheme, which grants a licence to use the ISI mark. Scheme-II is the Compulsory Registration Scheme, used mainly for electronics and IT goods. BIS also runs Scheme-IV (a certificate of conformity) and Scheme-X for some orders, but you will meet them less often.

Which products need BIS certification?

 

A product needs BIS certification if a current Quality Control Order or compulsory registration order covers it, which is one part of what product compliance covers. The test is the order, not a product type you’ve heard about, so start with your product’s function and the Indian Standard that describes it, then find the order that cites that standard.

 

BIS keeps its own lists by scheme: one page for Scheme-I products, grouped by order, and one for Scheme-II, grouped by the ministry that notified it. Read the order itself as well as the list entry, because the order sets the scope, the start date, any exemptions and any later amendment. If you have many product lines, Daptic tracks new, amended and withdrawn orders and works out which requirements apply to each product in each market, so the check doesn’t rest on a list someone saved last year.

 

How it plays out by category:

 

  • Electrical and electronic products, radio included: IT and electronics goods named in the Ministry of Electronics and Information Technology (MeitY) order, the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021, need CRS registration. Many electrical appliances and components sit under ISI-mark QCOs instead, so check both lists. Wireless approval for radio equipment is a separate regime and doesn’t replace BIS.
  • Toys: the Toys (Quality Control) Order, 2020 requires the ISI mark under Scheme-I. It took effect on January 1, 2021 and calls up IS 9873 (Part 1) for toys in general and IS 15644 for electric toys.[3]
  • Machinery: there is no general machinery order in force. A 2024 omnibus order would have brought listed machines and electrical equipment under BIS, but the Ministry of Heavy Industries withdrew it on January 16, 2026, before it took effect.[4] Individual machine types and components can still be covered by their own QCOs.
  • Materials, chemicals and inputs: many raw material and intermediate orders were withdrawn in 2025, including acetic acid on July 23, 2025 and pyridine in November 2025. Others remain, and CRS also covers some chemicals and solar photovoltaic products.

What is the difference between the ISI mark and CRS registration?

 

The ISI mark is a licence that BIS grants after inspecting the factory, while CRS is a registration granted on test reports from a recognized lab. The table shows how the two schemes differ on the points that drive cost and timing.

 

Scheme-I: ISI mark (Product Certification Scheme) Scheme-II: Compulsory Registration Scheme (CRS)
Typical products Toys, cement, appliances, steel, many components Electronics and IT goods (MeitY), solar PV (MNRE), some chemicals
Basis of grant Factory inspection plus independent testing of samples drawn by BIS Test report from a BIS-recognized lab, then registration
Unit of approval One product, one Indian Standard, one factory One product category, per manufacturer and factory location
Initial validity, before the 2026 amendments One to two years Two years
Renewal, before the 2026 amendments Up to five years at a time Two years at a time
Portal Manakonline (FMCS portal for foreign factories) CRS registration portal
Mark ISI mark with licence number Standard Mark or self-declaration text with registration number (R-number)

 

Under the ISI scheme, BIS wants a separate application for each factory and for each product and standard, even when the product is identical.[5] Only reports from BIS labs or BIS-recognized or empanelled labs are accepted, which is why a CE or UL report can’t be submitted in place of one.[5]

Who must hold the BIS licence or registration?

 

The manufacturer holds the licence or registration, for the factory where the product is made. A brand owner that outsources production can’t hold a licence for a factory it doesn’t run; the licence names the actual site.

 

Foreign manufacturers apply in their own name. Under the Foreign Manufacturers Certification Scheme (FMCS), the ISI scheme route for factories outside India, they nominate an Authorized Indian Representative (AIR), who must be resident in India, can represent only one manufacturer, apart from manufacturers in the same group, and is named in the licence.[6] The representative carries legal responsibility for compliance with the Act and the licence, including helping BIS draw samples from imported consignments.

 

The importer is pulled in even though it holds nothing. The Act prohibits importing, distributing, selling or storing covered goods without the Standard Mark under a valid licence, and Indian trade policy applies domestic technical standards to imports unless they are specifically exempted.[7] An importer bringing in a covered product from a factory without a licence is exposed, whatever the supplier promised.

How do you get BIS certification, step by step?

 

Start from the product and its factory, then follow the scheme the order names. For a foreign factory under the ISI scheme, BIS says grant takes about six months on average from a complete application.[8]

 

  1. Identify the order and standard: confirm which QCO or registration order covers each product, which Indian Standard and edition it cites, and its start date and exemptions.
  2. Map products to factories: list every model, the factory that makes it and the standard it falls under. Each combination may need its own application.
  3. Test: for CRS, test at a BIS-recognized lab before applying. For the ISI scheme, BIS draws samples during the factory visit and has them tested independently.
  4. Apply: use Manakonline or the FMCS portal for the ISI scheme and the CRS portal for registration. Foreign manufacturers nominate their representative at this stage.
  5. Factory inspection: under the ISI scheme, BIS visits the factory to check manufacturing and in-house testing capability.
  6. Grant: for a foreign ISI licence, pay the licence fee and an advance minimum marking fee, sign an agreement and an indemnity bond, and lodge a US$10,000 performance bank guarantee with a bank in India approved by the Reserve Bank of India.
  7. Mark and keep it live: apply the mark, report production, accept surveillance sampling and renew on time. BIS guidance gives ISI licences one to two years at grant and renewals of up to five,[5] and CRS registrations two years with two-year renewals,[9] but BIS amended its conformity assessment rules in February 2026 and revised CRS validity, renewal and annual fee provisions in May 2026, so check the current periods before you plan renewals.[10, 11]

What marking does a BIS-certified product need?

 

Every certified unit carries the Standard Mark and its licence or registration number. Under the ISI scheme, the licence number appears with the ISI mark, preferably below it, as CM/L followed by the number.[12]

 

Under CRS, BIS guidance allows the Standard Mark or the words “Self declaration – conforming to IS” with the standard number and year, plus the registration number, on the product and its packaging, or on the packaging alone where the product is too small. The marking also has to include the BIS website address.[13] Product standards and individual orders can add their own marking rules, so check both.

What happens if you import or sell without BIS certification?

 

Goods covered by an order can’t lawfully be made, imported, sold or stored without a valid licence or registration, and customs can hold shipments that lack one. The Act’s prohibition reaches anyone in the chain, not only the manufacturer.[1]

 

The penalty is up to two years’ imprisonment, or a fine of at least 200,000 rupees for a first contravention and at least 500,000 rupees for later ones, which can rise to ten times the value of the goods.[1] BIS also carries out search and seizure operations at warehouses and shops, and it can suspend or cancel a licence where the licensee or its representative doesn’t cooperate.

How do BIS requirements change, and how do you keep up?

 

Requirements change through new orders, amendments that postpone or widen them, revised Indian Standards and outright withdrawals. Each arrives as a notification in the Gazette of India, so the only reliable check is the current text of the order for your product.

 

July to November 2025: the government withdrew a series of QCOs on chemicals, polymers and fibres, removing the BIS requirement for those inputs.

 

January 16, 2026: the Ministry of Heavy Industries withdrew the omnibus machinery and electrical equipment order before it took effect.

 

June 9, 2026: the CRS order for cotton bales was rescinded.

 

In practice, treat the start date in an order as provisional until it arrives, and check again for postponements before you stop shipping uncertified stock. Recent orders often exempt goods made for export and allow manufacturers to import a limited number of units a year for research and development, on condition they aren’t sold, but the limits differ by order.

Example: applying this to two imported products

 

As an example of applying this article to a product, take a composite importer bringing in two products from the same overseas contract manufacturer: an IT product on the MeitY list and a battery-powered electric toy.

 

The IT product needs CRS registration. The manufacturer has a sample tested to the cited Indian Standard at a BIS-recognized lab, applies on the CRS portal and, once registered, marks the product and carton with the registration number. The existing CE report goes into the engineering file but not the application.

 

The toy needs an ISI licence under the Toys (Quality Control) Order, 2020, to IS 15644 for electric toys. The factory applies under FMCS, nominates its Indian representative, and waits for a BIS inspection and independent testing before it can mark a single unit. The licence names that factory, so moving production to a second site means a second application.

 

Then check the bill of materials. If the toy ships with a plug-in charger, find out whether the charger is itself on a list. If it is, it needs its own licence or registration from the factory that makes it, because the toy’s licence doesn’t cover it.

Frequently asked questions

Is BIS certification mandatory for all products sold in India?

No. It is mandatory only for products covered by a Quality Control Order or a compulsory registration order, and voluntary for everything else.

Can a foreign manufacturer get BIS certification?

Yes. Under the Foreign Manufacturers Certification Scheme the factory applies in its own name and nominates an Authorized Indian Representative resident in India, who is named in the licence.

Does a CE or UL test report count for BIS?

No. BIS accepts test reports only from BIS labs or BIS-recognized labs, so the product must be tested again to the Indian Standard.

How long is a BIS licence valid?

Under BIS guidance, an ISI licence is first granted for one to two years and can be renewed for up to five years at a time, and a CRS registration runs for two years and is renewed for two years at a time. BIS amended its conformity assessment rules in 2026, including the CRS validity and renewal provisions, so check the current terms for your scheme.

What is the difference between ISI and CRS?

The ISI mark is a licence granted after a factory inspection and BIS sampling, used for products such as toys and appliances. CRS is a registration based on lab test reports, used mainly for electronics and IT goods.

What happens if I import a product without BIS certification?

Customs can hold the goods, and the BIS Act provides for up to two years’ imprisonment or a fine of at least 200,000 rupees, rising to ten times the value of the goods.

Notes and sources

 

  1. Bureau of Indian Standards Act, 2016, particularly section 16(1); section 17; section 29(3).
  2. Bureau of Indian Standards (Conformity Assessment) Regulations, 2018 (BIS Act, Rules and Regulations page)
  3. Toys (Quality Control) Order, 2020
  4. Ministry of Heavy Industries, S.O. 239(E) of January 16, 2026, withdrawing the Machinery and Electrical Equipment Safety (Omnibus Technical Regulation) Order, 2024
  5. BIS, Product Certification FAQ (guidance)
  6. BIS, FMCS: Nomination of AIR (guidance)
  7. Foreign Trade Policy 2023, Chapter 2, particularly paragraph 2.03(a).
  8. BIS, FMCS: Grant of Licence (guidance)
  9. BIS, CRS: Instructions for Renewal of Registration (guidance)
  10. Bureau of Indian Standards (Conformity Assessment) Amendment Regulations, 2026
  11. BIS, CRS: Revised Provisions for Licence Validity, Renewal and Annual Fee Payment under CRS (circular), May 27, 2026.
  12. BIS, FMCS: BIS Standard Mark (guidance)
  13. BIS, CRS: Guidelines for use of Standard Mark and labelling (guidance)

 

Additional sources:

 

 

This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today