Daptic announces $22M funding to bring compliance into product development. Learn More
Request Demo
Expert Authored

UK PSTI Act: security requirements for connected consumer products

Learn what the UK PSTI Act requires for connected consumer products: passwords, flaw reporting, support periods, who is responsible and how to comply.
A product list card showing a Wi-Fi kettle and a Bluetooth toy, each tagged with the UK product security requirements that apply to it.
November 11, 2026

Marc HaddadMarc HaddadForward Deployed Regulatory Engineer

 

Since April 29, 2024, the UK’s Product Security and Telecommunications Infrastructure Act 2022 (the PSTI Act) has required connectable consumer products sold in the UK to have no shared default passwords, a published way to report security flaws and a stated end date for security updates. Manufacturers must also issue a statement of compliance.

Key points

 

  • Scope and timing: Any consumer product made available in the UK that connects to the internet or to other devices must meet three security requirements. They have applied since April 29, 2024, with no grace period, and they stop short of a general duty to design securely.
  • Who does what: The manufacturer meets the requirements and issues a statement of compliance. Importers and distributors make sure that statement travels with the product, refuse to supply products they believe fail, and report.
  • Business-only products: A product sold only to businesses is still in scope if an identical product is sold to consumers.
  • Penalties: Monetary penalties can reach £10 million or 4% of qualifying worldwide revenue, whichever is greater.

What is the PSTI Act?

 

The PSTI Act is the UK law that sets minimum security rules for connectable consumer products, one slice of what product compliance covers. Part 1 lets the government set those requirements, and the detail sits in a statutory instrument (regulations made under the Act) numbered S.I. 2023/1007: the Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023.

 

Both took effect on April 29, 2024, and they target three familiar weak points: shared default passwords, no clear way to report a flaw, and buyers who can’t tell how long a device will get security fixes. The Office for Product Safety and Standards (OPSS) enforces the rules for the Department for Science, Innovation and Technology.

Which products does the PSTI Act apply to?

 

The Act applies to “relevant connectable products”: products that can connect to the internet or a network, reach UK consumers and aren’t excepted.[1] Run three tests on each product variant.

 

Is it connectable? A product is internet-connectable if it can send and receive data over the internet using the Internet Protocol (IP) suite, the standard rules devices use to communicate online. A product that can’t reach the internet is still caught if it connects directly to an internet-connectable product over IP. A product using another protocol, such as Bluetooth, is caught only if it can connect directly to an internet-connectable product and to two or more products at the same time.[1] A Bluetooth product that pairs with one phone at a time fails that second condition, while a version that can hold two connections at once meets it.

 

Does it reach consumers? The duties attach to products made available to consumers in the UK, or to business customers where identical products reach consumers.[1] “Made available” means supplying or offering to supply to a person in the UK,[1] so a product made abroad and sold online to UK buyers is caught.

 

Is it excepted? Smart appliances, cameras, speakers, routers, wearables, smartphones and connected toys are in scope, and so are robot mowers, app-controlled power tools and connected irrigation kits sold to consumers. That includes a professional model if an identical model is sold to consumers. Schedule 3 to the 2023 Regulations sets out the exceptions:

 

  • Computers: Desktops, laptops and tablets without cellular (mobile network) connectivity are excepted, unless designed only for children under 14.[2] A tablet designed only for children therefore loses the exception.
  • Vehicles: Since February 25, 2025, products in Great Britain covered by the vehicle type-approval Regulations (EU) 2018/858, 168/2013 or 167/2013 are excepted.[2] An accessory outside those rules, such as a plug-in dash camera bought at retail, is assessed like any other consumer product.
  • Charge points, smart meters and medical devices: The exceptions cover electric vehicle charge points under the Electric Vehicles (Smart Charge Points) Regulations 2021, smart meters installed by licensed suppliers and assured under the National Cyber Security Centre (NCSC) scheme, and medical devices under the Medical Devices Regulations 2002.[2] A connectable product isn’t excepted just because it runs medical-device software.[2]
  • Northern Ireland: Certain products made available there are excepted, as covered below.[2]

Who is responsible for PSTI compliance?

 

The manufacturer carries the security requirements, and importers and distributors check, stop and report. The 2023 Regulations set those security requirements for manufacturers only.[2]

 

  • Manufacturer: anyone who makes a product, or has it made, and markets it under their own name or trade mark.[1] A brand selling a contract manufacturer’s product under its own label is the manufacturer. It must meet the security requirements,[1] and it may not make the product available without a statement of compliance or a summary of one.[1] It must also investigate, remedy and notify compliance failures.[1] It keeps investigation records for 10 years,[1] and the statement for 10 years or the defined support period, whichever is longer.[2]
  • Importer: whoever brings the product into the UK and is not its manufacturer.[1] It must make sure the statement accompanies the product and keep a copy,[1, 2] and it must not supply a product it knows or believes fails.[1] It must also investigate, remedy, notify and keep records.[1]
  • Distributor: anyone else making the product available in the UK, including retailers and online sellers.[1] It must check that the statement accompanies the product,[1] must not supply a product it believes fails,[1] and must act and notify.[1]

What are the PSTI security requirements?

 

There are three: no shared default passwords, a published way to report security issues, and a defined support period (the minimum time you will provide security updates) with an end date. Each product also needs a statement of compliance.

 

Each requirement has a deemed-compliance route, meaning that if you meet the named provisions of a standard, the law treats you as meeting the requirement. The main standard is ETSI EN 303 645 V2.1.1, from the European Telecommunications Standards Institute (ETSI). For reporting, ISO/IEC 29147:2018, from the International Organization for Standardization and the International Electrotechnical Commission, is an alternative.

 

The table shows what each requirement asks, what the manufacturer does about it, and the route to deemed compliance.

 

Requirement What the law requires What the manufacturer does Deemed-compliance route
Passwords (Schedule 1, para 1) Once out of factory default state, passwords must be unique per product or set by the user. Unique passwords can’t come from incremental counters, public information or serial numbers (unless encrypted or keyed-hashed), or be otherwise guessable. Cryptographic keys, API (application programming interface) keys and certain non-IP pairing PINs are not passwords. Remove shared defaults from the device, its local interfaces and any app it needs ETSI EN 303 645 V2.1.1 provisions 5.1-1 and 5.1-2
Reporting security issues (para 2) Publish at least one point of contact, and say when reporters will get an acknowledgement and status updates. The information must be in English, free, and available without a request or personal details. Publish a security contact page with stated response times EN 303 645 provision 5.2-1, or ISO/IEC 29147:2018 clauses 6.2.2, 6.2.5 and 6.5
Defined support period (para 3) Publish the minimum period of security updates as a period with an end date (regulation 2), in plain language. On your own sales pages, show it alongside the main product information. You may extend it but not shorten it. Set an end date per product and show it on product pages EN 303 645 provision 5.3-13
Statement of compliance (Act s.9; Schedule 4) Product type and batch, name and address of each manufacturer and authorised representative, a declaration of compliance, the defined support period, signatory, and place and date of issue. If you rely on a standard, give its number, version and date. Issue one statement per product, accompanying each unit A current JC-STAR STAR-1 or Singapore CLS label (Schedule 2A)

 

A current label under Japan’s JC-STAR STAR-1 scheme or Singapore’s Cybersecurity Labelling Scheme (CLS) also gives deemed compliance with each of the three security requirements.[2]

How do you comply with the PSTI Act?

 

Work product by product, then make sure the paperwork reaches every unit.

 

  1. Check scope: Run the three scope tests on every variant, checking each variant’s radio specification rather than the product family’s.
  2. Confirm your role: If the product carries your brand, you are the manufacturer.
  3. Fix passwords: Remove shared default passwords from the device, its local interfaces and any app it needs.
  4. Publish your security details: Put up a security contact page with acknowledgement and update times, and show a support end date on each product page.
  5. Issue statements: Write a statement of compliance for each product, listing the batch, and decide how it will accompany each unit.
  6. Brief the supply chain: Make sure your importers and retailers can confirm the statement is there.

Does CE marking or EU compliance cover the PSTI Act?

 

No. PSTI is a separate UK regime with its own statement of compliance, and the EU’s CE marking doesn’t cover it. The EU’s Radio Equipment Directive cybersecurity delegated act and the Cyber Resilience Act have their own requirements and marking, but meeting them does not satisfy PSTI. Nor is EN 18031 a deemed-compliance route under the 2023 Regulations.

 

A connected product sold in both markets ends up with two sets of rules and two sets of paperwork, each amended on its own timetable. Daptic follows those changes in the UK, the EU and other markets and works out which of these rules reach each of your connected products in each market, as shown in a walkthrough of how Daptic maps a product to its requirements.

PSTI edge cases: trade-only models, Northern Ireland and “accompany”

 

Trade-only models: “We only sell it to installers” does not take a product out of scope if an identical retail version exists.[1] Separately, an installer who fits the product into a building is not a distributor where identical products also reach consumers by other routes.[1]

 

Northern Ireland: Products made available in Northern Ireland are excepted where they are covered by EU legislation that is listed in Annex 2 to the Windsor Framework (the UK and EU arrangement for goods in Northern Ireland) and has a free movement article.[2] The exception follows the unit’s market, so units shipped to Great Britain stay under PSTI.

 

What “accompany” means: The Act does not define “accompany” or “document”, and OPSS guidance says the statement need not be physical. How it reaches each unit is your call, but your importers and retailers have to be able to confirm it is there.

What are the penalties for breaching the PSTI Act?

 

Monetary penalties can reach £10 million or 4% of qualifying worldwide revenue, whichever is greater,[1] and directors can be personally liable.[1]

 

The Secretary of State can issue compliance notices, stop notices and recall notices, normally after 10 days’ notice of intent.[1] Ignoring a notice is an offence,[1] and if a breach continues after the payment deadline, up to £20,000 a day can be added.[1] Courts can order forfeiture of the goods,[1] and the government can publish enforcement action.[1]

How are the PSTI rules changing?

 

PSTI rules change through amending regulations made under the Act, while OPSS guidance, which is not law, is updated separately.

 

From February 25, 2025, S.I. 2025/211 excepted vehicles in Great Britain, and from December 4, 2025, S.I. 2025/1267 added the JC-STAR and Singapore deemed-compliance routes.

 

Within five years of April 29, 2024, the first statutory review of the 2023 Regulations is due to take place.[2] The Regulations name ETSI EN 303 645 by version (V2.1.1), so a newer edition counts only if they are amended to name it.

 

On September 17, 2026, the government last updated its interim response on separate Energy Smart Appliances Regulations for heating appliances, which it has consulted on but not yet made. The response says those regulations would accept ETSI EN 303 645 or EN 18031-3:2024 and apply from October 31, 2028, or two years after being made, whichever is later.

Example: applying PSTI to a Wi-Fi kettle and a Bluetooth toy

 

This composite example shows how to run the tests above on your own range. A consumer brand sells a Wi-Fi kettle and a Bluetooth toy, both made by a contract manufacturer in Asia, through its own website and a UK retail chain.

 

Roles: The products carry the brand’s name, so the brand is the manufacturer, not an importer.[1] The retailer is a distributor.

 

Scope: The kettle is internet-connectable, and the toy is network-connectable because it links to a parent’s tablet and to a second toy at the same time.

 

Passwords: The kettle’s local setup page shipped with one shared admin password, which had to be replaced with a password the user sets at first use. The toy’s pairing PIN is not a “password” under the 2023 Regulations.[2]

 

Paperwork: Both products needed a security contact page with response times, a support end date on each product page, and a statement of compliance for each product listing the batch. The retailer asked for the statements before its first purchase order.

Frequently asked questions

When did the PSTI Act come into force?

The PSTI Act’s product security rules and the 2023 Regulations took effect on April 29, 2024, with no grace period.

Does the PSTI Act apply to products made outside the UK?

Yes, because the Act covers products supplied or offered to a person in the UK, so a product made abroad and sold online to UK buyers is caught.

Does the PSTI Act apply to Bluetooth devices?

Only some. A Bluetooth product is in scope if it can connect directly to an internet-connectable product and to two or more products at the same time.

Does the PSTI Act require security certification?

No. It sets three baseline requirements (passwords, a way to report security issues and a defined support period) plus a statement of compliance, and this regime does not mandate wider secure design.

Can a manufacturer promise updates “for the life of the product” under PSTI?

No, because the defined support period must be a period with an end date, which you may extend but not shorten.

What is the maximum penalty under the PSTI Act?

Monetary penalties can reach £10 million or 4% of qualifying worldwide revenue, whichever is greater, plus up to £20,000 a day if a breach continues after the payment deadline.

Notes and sources

 

  1. Product Security and Telecommunications Infrastructure Act 2022, Part 1: sections 4 to 9, 12, 14 to 32, 36, 38, 42, 46, 52, 54 to 56
  2. S.I. 2023/1007, the Security Requirements for Relevant Connectable Products Regulations 2023 (as amended): regulations 2, 3, 8 to 10; Schedules 1, 2, 2A, 3 and 4, particularly paragraph 5; paragraphs 6 to 8; paragraphs 2 to 4; paragraph 3(2); paragraph 1; paragraph 1(4).

 

Additional sources:

 

 

This article reflects Marc Haddad’s independent opinions, not necessarily those of Daptic.

Resources

Related Articles

Request a Demo Today